Description: The Weidmuller W clamping frame grounding terminal block WPE 70/95 offers a highly reliable and versatile design with clamping frame connection for easy planning and optimized operational safety. Klippon Connect responds to a wide range of requirements and validates the solution.
Product parameters
version | Terminal block type for earthing, Screw connection, 95 mm², 11400 A (95 mm²), green/yellow | Order number | 1037300000 | type | WPE 70/95 | GTIN (EAN) | 4008190495664 | quantity | 10 pc(s). |
deep | 107 mm | Depth (inches) | 4.213 inch | Depth (with DIN rail) | 115.5 mm | height | 132 mm | Height (inches) | 5.197 inch | width | 27 mm | Width (inches) | 1.063 inch | net weight | 387.803 g |
Installation instructions | Screwed | Installation: | Screwed | Open end | Closed | Stops | Can be screwed | The number of the same terminals | 1 | Explosion-proof version | be |
Strip length | 30 mm | Crimp range, maximum | 120 mm² | Crimp range, minimum | 13.3 mm² | Crimp the screws | M 8 | Maximum crimping area of conductor AWG | AWG 2/0 | Minimum crimping area of the conductor AWG | AWG 6 | Conductor connection cross-sectional area, single strand hard conductor, maximum | 16 mm² | Conductor connection cross-sectional area, single strand of hard conductor, minimum | 16 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, max | 95 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, minimum | 16 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/4, max | 50 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/4, minimum | 35 mm² | Wiring cross-sectional area, stranded wire, maximum | 120 mm² | Wiring cross-sectional area, stranded wires, minimum | 16 mm² | Maximum crimping area for flexible wires | 95 mm² | Maximum tightening torque | 12 Nm | Minimum cross-sectional area of stranded conductors | 16 mm² | Minimum tightening torque | 6 Nm | Measuring gauge according to 60 947-1 | B12 | Number of junctions | 2 | The type of join | Screw connection | Screwdriver edge size | S6 (DIN 6911) | Connection direction | Horizontal line entry |
Installation instructions | Screwed | Maximum crimping area of conductor AWG | AWG 2/0 | Minimum crimping area of the conductor AWG | AWG 6 | guide rail | TS 35 | standard | IEC 60947-7-2 |
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. Interests do not work, and brilliant flowers bloom from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to reach or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service concept.
This article introduces the Weidmuller W clamping frame grounding terminal block WPE 70/95 products, if you are interested in Weidmuller terminal block, please also contact our staff, we look forward to your call, expect our technology and service to bring you a better experience
|
More on that
|
Weidmuller APGTB 4 PE 4C/2 weighs 18.115g
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller Z feed-through terminal block ZDU 4/3AN
Introduction: Weidmuller Z Tension Clamp Feed-Through Terminal Blocks ZDU 4/3AN
Product parameters
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. ...
|
|
Weidmuller terminal block A3C 2.5 DL with a rated current of 24A
Description: Weidmuller terminal block A3C 2.5 DL, feed-through terminal, PUSH IN, 2.5 mm², 800 V, 24 A, dark beige
Features:
Feed-through terminal block with protection function is an electrical conductor for safety protection, suitable for ...
|
|
Weidmuller terminal block A2C 4 DL with a rated current of 32A
Description: Weidmuller terminal block A2C 4 DL, feed-through terminal, PUSH IN, 4 mm², 800 V, 32 A, dark beige
Features:
Feed-through terminal blocks with protection function are electrical conductors for safety protection and are suitable for multi...
|
|
The Weidmuller W clamping wire frame switch-type terminal block WTR 2.5/ZZ has a rated current of 16A
Introduction: Weidmuller W clamping wire frame switch-type terminal block WTR 2.5/ZZ
Product parameters
Our customer-centric service concept: a full range of services seek a high quality, high standards of service, and seek to do a good job in every detail of the service process.
|
|
Weidmuller terminal block A3C 2.5 DL BL
Description: Weidmuller terminal block A3C 2.5 DL BL, feed-through terminal, PUSH IN, 2.5 mm², 800 V, 24 A, blue
Features:
Feed-through terminal blocks with protection function are electrical conductors used for safety protection, ...
|
|
Weidmuller terminal block A2T 2.5 EM2 D/0 voltage 24 V
Description: The Weidmuller A2T uses the PUSH IN technology to reduce the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller APGTB 2.5 2T VL 4C/2 height 91 mm
Introduction: The Weidmuller APGTB 2.5 2T VL 4C/2 with PUSH IN technology reduces the time spent on wiring to a minimum. The way to insert directly ensures that ...
|
|
The Weidmuller ADT 2.5 2C cross-section 2.5 mm²
Introduction: The Weidmuller ADT uses the PUSH IN technology to connect the dome with the innovative PUSH IN technology to reduce the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller APGTB 2.5 FT 4C/2 BL 2.5 mm²
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller terminal block A3C 6 PE surge voltage 8 kV
Introduction: The Weidmuller A3C 6 PE is an in-line tension clamp connection with PUSH IN technology, which reduces the time spent on wiring to a minimum. Direct insertion ensures high wire pull-out ...
|
|
Weidmuller S3C 2.5 PE Wiring Technology SNAP IN
Description: Weidmuller S3C 2.5 PE, Weidmüller PEKlippon® Connect terminal blocks use SNAP IN wiring technology to wiring the control cabinet with intuitive and simple operation. Reduced cable preparation and faster wiring speeds, resulting in ...
|
|
Weidmuller W clamping frame feed-through terminal blocks WDU 70/95/3
Introduction: Weidmuller W clamping frame feed-through terminal block WDU 70/95/3
Product parameters
Our customer-centric service concept: a full range of services seek a high quality, high standards of service, and seek to do a good job in every detail of the service process.
|
|
Germany Weidmuller/Weidmüller terminal block ZDK 2.5-2PE shrapnel connection
Introduction: The Weidmuller ZDK 2.5-2PE is a universal wiring system for all common conductor connection types. The flexibility of the shrapnel wiring makes it a beneficial wiring ...
|
|
Weidmuller A Push-in Ground Terminal Block A4C 2.5 BR with a rated current of 24A
Introduction: Weidmuller A Push-in Ground Terminal Block A4C 2.5 BR
Product parameters
Our customer-centric service concept: a full range of services seek a high quality, high standards of service, and seek to do a good job in every detail of the service process.
|
|
Weidmuller A3C 1.5 rated current 17.5 A
Introduction: The Weidmuller A3C 1.5 is a push-in tension-clamp connection with PUSH IN technology, which reduces the time spent on wiring to a minimum. Direct insertion ensures high pull-out force of the conductor ...
|
|
Weidmuller APGTB 1.5 FT 4C/2 BL 6.085g
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Germany Weidmuller/Weidmüller terminal block AFS 2.5 CF 2C 24V BK
Introduction: The Weidmuller A2T terminal block with PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Germany Weidmuller/Weidmüller terminal block ZDK 2.5 net weight 9.612g
Description: The Weidmuller ZDK 2.5 is a universal wiring system for all common conductor connection types. Superior flexibility makes shrapnel wiring a beneficial wiring option ...
|
|
Weidmuller Z tension-clamp feed-through terminal blocks ZDU 6/3AN with a rated current of 41A
Introduction: The Weidmuller Z feed-through terminal block ZDU 6/3AN, the dome marshalling technology is a universal wiring system for all common conductor connection types. The flexibility makes shrapnel wiring a beneficial wiring option.
Product References ...
|
|
Contact
working hours
