Introduction: Weidmuller Clamping frame feed-through terminal block SAKDU 35 RE, the transmission of power, signals and data is a traditional requirement in electrical engineering and enclosure assembly. The way in which the insulation, connection systems and terminal blocks are designed are the ones that help to differentiate the products. Feed-through terminals are suitable for combining and/or connecting one or more conductors. They have monolayer or multilayer forms that are of the same potential or isolated from each other
Product parameters
version | Feed-through terminal, Screw connection, 35 mm², 800 V, 125 A, red | Order number | 1371850000 | type | SAKDU 35 RE | GTIN (EAN) | 4050118173512 | quantity | 25 pc(s). | Local products | Only available in select countries |
deep | 58.25 mm | Depth (inches) | 2.293 inch | Depth (with DIN rail) | 59 mm | height | 52 mm | Height (inches) | 2.047 inch | width | 15.9 mm | Width (inches) | 0.626 inch | net weight | 56 g |
Storage temperature | -25 °C...55 °C | Minimum continuous operating temperature | -50 °C | Maximum continuous operating temperature | 120 °C |
Installation: | Snap directly onto the rail |
Strip length | 16 mm | Crimp range, maximum | 35 mm² | Crimp range, minimum | 4 mm² | Crimp the screws | M 6 | Maximum crimping area of conductor AWG | AWG 2 | Minimum crimping area of the conductor AWG | AWG 12 | Conductor connection cross-sectional area, single strand hard conductor, maximum | 16 mm² | Conductor connection cross-sectional area, single strand of hard conductor, minimum | 4 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, max | 35 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, minimum | 4 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/4, max | 35 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/4, minimum | 4 mm² | Wiring cross-sectional area, stranded wire, maximum | 35 mm² | Wiring cross-sectional area, stranded wires, minimum | 4 mm² | Maximum crimping area for flexible wires | 35 mm² | Maximum tightening torque | 5 Nm | Minimum cross-sectional area of stranded conductors | 4 mm² | Minimum tightening torque | 4 Nm | Measuring gauge according to 60 947-1 | B8 | Number of junctions | 2 | The type of join | Screw connection | Connection direction | Horizontal line entry |
Maximum crimping area of conductor AWG | AWG 2 | Minimum crimping area of the conductor AWG | AWG 12 | guide rail | TS 35 |
Rated cross-section | 35 mm² | Rated voltage | 800 V | Current rating | 125 A | Maximum current | 125 A | Volume resistivity according to IEC 60947-7-x | 0.26 mΩ | Rated surge voltage | 8 kV | Power losses are in accordance with IEC 60947-7-x | 4 W | Pollution level | 3 | Overvoltage rating | II |
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. Interests do not work, and brilliant flowers bloom from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to reach or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service concept.
This article introduces the Weidmuller Crimping Wire Frame Feed-Through Terminal Block SAKDU 35 RE products, if you are interested in Weidmuller Terminal Block, please also contact our staff, we look forward to your call, and hope that our technology and service can bring you a better experience
|
More on that
|
Weidmuller S3C 2.5 DL BL Snap IN Terminal Block
Introduction: The Weidmuller S3C 2.5 DL BL terminal block uses SNAP IN wiring technology for intuitive and simple operation in the cabling of the control cabinet
Features:
Feed-through terminal blocks with protection function are electrical conductors used for safety protection, ...
|
|
Weidmuller terminal block A2T 1.5 PE stripping length 8 mm
Introduction: The Weidmuller A2T 1.5 PE with PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures the high pull of the wire.
|
|
Germany Weidmuller/Weidmüller terminal block ZPE 16 net weight 48.672g
Introduction: The Weidmuller ZPE 16 is a universal wiring system for all common conductor connection types. Superior flexibility makes shrapnel wiring a beneficial wiring option ...
|
|
The Weidmuller ZDK 2.5 EM knife edge size is 0.6x3.5mm
Introduction: The Weidmuller ZDK 2.5 EM is a universal wiring system for all common conductor connection types. The flexibility of the shrapnel wiring makes it a beneficial wiring ...
|
|
Weidmuller A2T terminal blocks with a nominal cross-section of 2.5 mm²
Description: The Weidmuller A2T uses the PUSH IN technology to reduce the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller ZDK 1.5DU-PE net weight 12.4g
Introduction: The Weidmuller ZDK 1.5DU-PE is a universal wiring system for all common conductor connection types. The flexibility of the shrapnel wiring is a beneficial connection.
|
|
Weidmuller W clamping frame feed-through terminal blocks WDU 35/IK/ZA
Introduction: Weidmuller W clamping frame feed-through terminal block WDU 35/IK/ZA
Product parameters
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process.
|
|
Weidmuller ZPE 4-2/2AN net weight 14.47g
Introduction: The Weidmuller ZPE 4-2/2AN is a universal wiring system for all common conductor connection types. The flexibility of the shrapnel wiring makes it a beneficial wiring ...
|
|
Weidmuller W clamping frame feed-through terminal block WMF 2.5 with a rated current of 24A
Introduction: Weidmuller W clamping wire frame feed-through terminal block WMF 2.5,
Product parameters
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. ...
|
|
Weidmuller Feed-through terminal block SAKDU 35 YE screw connection
Description: Weidmuller SAKDU 35 YE feed-through terminal block for clamping frames, the transmission of power, signals and data is a traditional requirement in electrical engineering and cabinet assembly. The insulation, connection systems and terminal blocks are designed in such a way that they help the product achieve ...
|
|
Weidmuller Crimp Wire Frame Feed-Through Terminal Blocks SAKDU 16 YE Rated voltage 800V
Introduction: Weidmuller SAKDU 16 YE Feed-through terminal block The transmission of power, signals and data is a traditional requirement in electrical engineering and enclosure assembly. The insulation, connection systems and terminal blocks are designed in such a way that they help the product achieve ...
|
|
Weidmuller W Clamping Frame Terminal Block Accessory WEW 35/2
Description: The Weidmuller W Clamping Terminal Block WEW 35/2 is a highly reliable and versatile terminal block with clamping frame connection that simplifies planning and optimizes operational safety. Klippon Connect is able to respond to a wide range of different requirements.
|
|
Weidmuller S2T 2.5 PE DL wiring technology SNAP IN
Description: The Weidmuller S2T 2.5 PE DL terminal block uses SNAP IN wiring technology for intuitive and simple operation in the cabling of the control cabinet
Features:
Feed-through terminal blocks with protection function are electrical conductors used for safety protection, ...
|
|
Weidmuller APGTB 4 FT 4C/2 BL current 32A
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller APGTB 4 PE 4C/2 weighs 18.115g
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller APGTB 2.5 PE 4C/2 pluggable
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
The Weidmuller W clamping wire frame switch-type terminal block WTR 2.5/ZZ has a rated current of 16A
Introduction: Weidmuller W clamping wire frame switch-type terminal block WTR 2.5/ZZ
Product parameters
Our customer-centric service concept: a full range of services seek a high quality, high standards of service, and seek to do a good job in every detail of the service process.
|
|
Weidmuller SAKDU 6 RE feed-through terminal block with a rated current of 41 A
Introduction: Weidmuller Clamping frame feed-through terminal block SAKDU 6 RE, the transmission of power, signals and data is a traditional requirement in electrical engineering and enclosure assembly. The insulation, connection system and terminal blocks are designed in such a way that they can help the product achieve the difference in the product.
|
|
Weidmuller Feed-Through Terminal Block A2C 35 3FT-N-PE
Product Introduction: Feed-through Terminal Blocks Power FeedsOur wide range of W-series terminal blocks, as well as our main harness breakout terminals, are optimally designed to ensure both convenience and space savings, ensuring safe and convenient wiring at the power feed.
...
|
|
Weidmuller ZDT 2.5/2 V cross-section 2.5 mm²
Description: The Weidmuller ZDT 2.5/2 V terminal block is a universal wiring system for all common conductor connection types. The flexibility of the shrapnel wiring makes it a beneficial wiring ...
|
|
Contact
working hours
