Introduction: Weidmuller SAKDU 16 YE Feed-through terminal block The transmission of power, signals and data is a traditional requirement in electrical engineering and enclosure assembly. The way in which the insulation, connection systems and terminal blocks are designed are the ones that help to differentiate the products. Feed-through terminals are suitable for combining and/or connecting one or more conductors. They have monolayer or multilayer forms that are of the same potential or isolated from each other
Product parameters
version | Feed-through terminal, Screw connection, 10 mm², 800 V, 76 A, yellow | Order number | 1371800000 | type | SAKDU 16 YE | GTIN (EAN) | 4050118173352 | quantity | 50 pc(s). | Local products | Only available in select countries |
deep | 49.75 mm | Depth (inches) | 1.959 inch | Depth (with DIN rail) | 50.5 mm | height | 51 mm | Height (inches) | 2.008 inch | width | 12 mm | Width (inches) | 0.472 inch | net weight | 25.16 g |
Storage temperature | -25 °C...55 °C | Minimum continuous operating temperature | -50 °C | Maximum continuous operating temperature | 120 °C |
Installation: | Snap directly onto the rail |
Strip length | 15.5 mm | Crimp range, maximum | 16 mm² | Crimp range, minimum | 2.5 mm² | Crimp the screws | M 4 | Maximum crimping area of conductor AWG | AWG 4 | Minimum crimping area of the conductor AWG | AWG 12 | Conductor connection cross-sectional area, single strand hard conductor, maximum | 16 mm² | Conductor connection cross-sectional area, single strand of hard conductor, minimum | 2.5 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, max | 16 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/1, minimum | 4 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/4, max | 16 mm² | Conductor connection cross-section, stranded thin conductors, with wire-end ferrule DIN 46228/4, minimum | 4 mm² | Wiring cross-sectional area, stranded wire, maximum | 16 mm² | Wiring cross-sectional area, stranded wires, minimum | 2.5 mm² | Maximum crimping area for flexible wires | 16 mm² | Maximum tightening torque | 1.6 Nm | Minimum cross-sectional area of stranded conductors | 4 mm² | Minimum tightening torque | 1.2 Nm | Measuring gauge according to 60 947-1 | B6 | Number of junctions | 2 | The type of join | Screw connection | Connection direction | Horizontal line entry |
Maximum crimping area of conductor AWG | AWG 4 | Minimum crimping area of the conductor AWG | AWG 12 | guide rail | TS 35 |
Rated cross-section | 10 mm² | Rated voltage | 800 V | Current rating | 76 A | Maximum current | 76 A | Volume resistivity according to IEC 60947-7-x | 0.56 mΩ | Rated surge voltage | 8 kV | Power losses are in accordance with IEC 60947-7-x | 1.82 W | Pollution level | 3 | Overvoltage rating | III |
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. Interests do not work, and brilliant flowers bloom from lies. Only every process, every action, and every detail of the service can be professional and careful, in order to reach or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service concept.
This article introduces the Weidmuller Clamping Wire Frame Feed-Through Terminal Block SAKDU 16 YE products, if you are interested in Weidmuller Terminal Block, please also contact our staff, we look forward to your call, and hope that our technology and service can bring you a better experience
|
More on that
|
Weidmuller terminal block A3C 16 DL BL with a rated current of 76A
Description: Weidmuller terminal block A3C 16 DL BL, feed-through terminal, PUSH IN, 16 mm², 1000 V, 76 A, blue
Features:
Feed-through terminal block with protection function is an electrical conductor for safety protection, suitable for ...
|
|
Weidmuller ZDK 2.5/3AN D2 stripping length 10 mm
Introduction: The Weidmuller ZDK 2.5/3AN D2 is a universal wiring system for all common conductor connection types. Superior flexibility makes shrapnel wiring a beneficial ...
|
|
Weidmuller Terminal Block AFS 2.5 CF 2C BK Net Weight 9.124g
Introduction: The Weidmuller AFS 2.5 CF 2C BK with PUSH IN technology reduces the time spent on cabling to a minimum. Direct insertion in a way that ensures that the wire ...
|
|
Weidmuller P Push-in terminal block PNT 6/10 net weight 18.29 g
Introduction: Weidmuller P Push-in terminal block PNT 6/10
Product parameters
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. Sharp...
|
|
Weidmuller Z tension-clamp feed-through terminal block ZDU 2.5/3AN OR
Description: Weidmuller Z push-through terminal block ZDU 2.5/3AN OR
Product parameters
Our customer-centric service concept: a full range of services seek a high quality, high standard of service, and seek to do a good job in every service process.
|
|
Weidmuller ZDU 2.5-2 O.EL current 1A
Introduction: The Weidmuller ZDU 2.5-2 O.EL is a universal wiring system for all common conductor connection types. Superior flexibility makes shrapnel wiring a beneficial ...
|
|
Weidmuller ZVLD 2.5 has a nominal cross-section of 2.5 mm²
Introduction: The Weidmuller ZVLD 2.5 is a universal wiring system for all common conductor connection types. The flexibility of shrapnel wiring makes it a beneficial wiring option.
|
|
Weidmuller S3C 4 PE Wiring Technology SNAP IN
Description: Weidmuller S3C 4 PE, Weidmüller PEKlippon® Connect terminal blocks use SNAP IN wiring technology to wiring the control cabinet in an intuitive and simple way. Reduced cable preparation and faster wiring for safe...
|
|
Weidmuller ZSI 2.5-2/2X2AN/G20 250V
Introduction: The Weidmuller ZSI 2.5-2/2X2AN/G20 uses the push-in tension-clamp connection of the spring-clamp technology, which is a universal wiring system for all common conductor connection types. The flexibility of the shrapnel makes it a great option for the wiring of the shrapnel.
|
|
Germany Weidmuller/Weidmüller terminal block ZPE 2.5 net weight 11.17g
Introduction: The Weidmuller contact terminal ZPE 2.5 uses a push-in tension-clamp connection with tension-clamp technology, which is a universal wiring system for all common conductor connection types. Superior flexibility makes shrapnel wiring a beneficial wiring option ...
|
|
Germany Weidmuller/Weidmüller terminal block ZSI 2.5 net weight 19.54g
Introduction: The Weidmuller ZSI 2.5 uses a push-clamp connection with tension-clamp technology, which is a universal wiring system for all common conductor connection types. Superior flexibility makes shrapnel wiring a beneficial wiring option ...
|
|
Weidmuller terminal block A2C 6 PE cross-section 6 mm²
Introduction: The Weidmuller A2C 6 PE is an in-line tension-clamp connection with PUSH IN technology, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. Direct insertion ensures high wire pull-out ...
|
|
Weidmuller SAKDK clamping frame double-decker terminal block SAKDK 4N
Introduction: Weidmuller SAKDK 4N double-decker terminal block with clamping frame
Product parameters
Our customer-centric service concept: a full range of services seek a high quality, high standards of service, and seek to do a good job in every detail of the service process.
|
|
Weidmuller W clamping frame feed-through terminal block WMF 2.5 with a rated current of 24A
Introduction: Weidmuller W clamping wire frame feed-through terminal block WMF 2.5,
Product parameters
Our customer-centric service concept: a full range of services seek a high-quality, high-standard service, and seek to do a good job in every detail of the service process. ...
|
|
Weidmuller APGTB 4 FT 4C/2 BL current 32A
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller ADT 2.5 2C BL max voltage 400V
Introduction: The Weidmuller ADT uses the PUSH IN technology to connect the dome with the innovative PUSH IN technology to reduce the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller feed-through terminal blocks WPE 2.5N are compact
Product description: Klippon Connec terminal blocks with crimping frame technology are highly reliable and versatile in design, simplifying planning and optimising operational safety. Klippon Connect is able to respond to a wide range of requirements ...
|
|
Weidmuller APGTB 1.5 2T 4C/2 BL 17.5A
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller APGTB 1.5 PE 3C/1 pluggable
Introduction: The Weidmuller APGTB terminal blocks are equipped with PUSH IN technology for push-in tension-clamp connections, and the innovative PUSH IN technology reduces the time spent on wiring to a minimum. The direct insertion method ensures a high pull-out force of the wire, ...
|
|
Weidmuller ZDU 2.5/2X2AN/LD+ weighs 13.5g
Introduction: The Weidmuller ZDU 2.5/2X2AN/LD+ is a universal wiring system for all common conductor connection types. Superior flexibility makes shrapnel wiring a beneficial ...
|
|
Contact
working hours
