Product Introduction
Product Name: Servo Drive
Model: SGD7S-3R8A10A
Brand: Yaskawa
Single-axis servo drive SGD7S.
Large applicable motor capacity: 0.75kW.
Voltage: single-phase/three-phase AC200V.
Interface: MECHATROLINK-III communication command type.
Design Order: A.
Hardware Options: No Option SGD7S-3R8A10A Instruction Manual.
A minimum order of 1 unit of products that meet the customer's required specifications is required.
When ordering a servo unit, the parameters can be set at the factory.
There is no need to write parameters at the equipment assembly site, which reduces the equipment delivery time.
Support the management and maintenance of products
By scanning the QR code with a smartphone, you can easily check the traceability of the product (production information).
Enhance troubleshooting
When the QR code is read through a smartphone, the fault diagnosis of the product can be displayed.
Automatically obtain the tracking information when the alarm occurs in the servo unit SGD7S-3R8A10A instruction manual.
It helps to troubleshoot as much as possible.
Run the situation early and carry out planned maintenance.
Predict the life of maintenance parts and indicate the replacement time on the screen.
Based on this information, maintenance can be carried out before the product fails to prevent system downtime. Servo motor SGMGH type.
Rated speed: 1000r/min.
Power: 0.9kw.
Power supply voltage: three-phase AC200V.
Serial encoder: 17-bit relative.
Design sequence: SGD7S-3R8A10A instruction manual for machine tools.
Shaft end: straight shaft with key belt screw hole.
Options: With oil seal, DC24V brake.
High-speed feed series: When there is no load and high-speed operation is required.
The power supply of the main circuit and the control loop is completely separated,
When alarming, only the power supply of the main circuit can be turned off, which is easy to maintain.
Built-in parameter setter.
Parameters can be entered directly from the servo drive body.
Save wiring.
The serial encoder is used, and the number of encoder wiring is reduced by 1/2 compared to the conventional productYaskawa SGD7S-3R8A10A manual.
All-in-one control: Torque and position control can be used instead of using parameter switching. Σ-V series servo motor SGMSV type.
Rated output: 5.0kw.
Power supply voltage: AC400V.
Serial encoder: 20-bit incremental type (standard).
Design Order: Standard.
Shaft ends: straight shaft, without keyway (standard).
Optional: Without option.
High power rate of change.
Complete assortment (1.0kW - 7.0kW with holding brake) Yaskawa SGD7S-3R8A10A manual.
Equipped with a high-resolution serial encoder (20-bit).
IP67 (IP22 for 7.0kw) is used as standard.
Application examples:
Placement machine.
Printed circuit board punching machine.
Machine tool feed.
Ratings & Specifications:
Rated time: continuous Yaskawa SGD7S-3R8A10A manual.
Vibration level: V15.
Edge resistance: DC500V, 10MΩ or more.
Ambient temperature: 0-40°C.
Excitation method: permanent magnet type.
Installation: Flange type.
Heat resistance class: F.
Edge withstand voltage: AC1500V 1 minute (200V class), AC1800V 1 minute (400V class).
Protection method: fully enclosed self-cooling IP67 (except for shaft through part).
Ambient humidity: 20-80% (no condensation).
Connection: Direct connection.
Direction of rotation: Counterclockwise direction (CCW) rotation when viewed from the load side under the forward rotation command. High-capacity SGMVV servo motor.
Rated output: 30KW.
Voltage: three-phase AC200V.
Serial encoder: 20-bit incremental type.
Rated speed: 800r/min.
Main mechanical structure: leg mounting type, straight shaft end (without keyway and screw hole).
Option: With dust seal.
The use of a small, low-inertia servo motor can also give full play to the powerful performance of the machine SGD7S-3R8A10A.
The new model SGMVV is equipped with SGD7S-3R8A10A instruction manual for rated output of 222-55KW and passenger speed of 800r/min and 1500r/min.
As soon as the motor is installed, the phase starts running.
Even if no servo adjustment is made, as long as the moment of inertia is within the allowable range,
Even if the load changes, the drive can be carried out stably without vibration.
If you are interested in our Yaskawa servo drive SGD7S-3R8A10A single-phase/three-phase AC200V, please call our staff, looking forward to your call~
|
More on that
|
YASKAWA/Yaskawa SGMPS-02A2A2EE medium inertia flat motor
Introduction: YASKAWA/Yaskawa SGMPS-02A2A2EE medium inertia flat motor, rated output: 200W (0.2kw), power supply voltage: AC200V, serial encoder: 17-bit logarithmic type (standard), design sequence: IP55 (standard)
Product Picture Show:
...
|
|
Yaskawa servo driver SGDV-2R8F01B002000 Rated output: 3.0kW
Product Introduction
Name: Yaskawa
Type: Servo drive
Model: SGDV-2R8F01B002000
No reducer, low inertia, high-speed servo motor SGM7A type (rated speed 3000r/min).
Rated output: 3.0kW.
Power supply voltage: AC200V. ...
|
|
YASKAWA/Yaskawa SGMAV-10A3A21-∑-V series servo motor SGMAV type
Introduction: YASKAWA/Yaskawa SGMAV-10A3A21-∑-V series servo motor SGMAV type, rated output: 1.0kw. Supply Voltage: AC200V, Serial Encoder: 20-bit Pair Value (Standard), Design Sequence: Standard.
Product Picture Show:
Product basic information ...
|
|
YASKAWA SGDV-R70F01A Servo Drive Analog Voltage Pulse Command Type
YASKAWA Servo Drive, ∑-V Series Servo Unit SGDV Type, Large Applicable Motor Capacity: 0.05kw, Power Supply Voltage: Single-phase AC100V, Design Sequence: Type A
YASKAWA/Yaskawa SGDV-R70F01A photo show
Basic Product Information:
Large applicable motor capacity ...
|
|
Yaskawa/Yaskawa Low Inertia Servo Motor SGMAV-A5A3A2E-Rated Output: 0.05kw(50W)
Introduction: YASKAWA/Yaskawa Low Inertia Servo Motor SGMAV-A5A3A2E - Rated Output 0.05kw (50W), Supply Voltage: AC200V, Serial Encoder: 20 Bit Pair Value (Standard), Design Order: Standard.
Product Picture Show:
Basic Product Information: ...
|
|
YASKAWA/Yaskawa/Yaskawa low inertia servo motor
Introduction: Yaskawa/Yaskawa/Yaskawa low inertia servo motor, rated output: 0.4kw (400W), power supply voltage: AC200V, serial encoder: 20-bit pair value (standard), design sequence: standard
Product Picture Show:
Basic Product Information: ...
|
|
Yaskawa/Yaskawa SGDV-2R1F01B002000 servo drive
Introduction: YASKAWA/Yaskawa SGDV-2R1F01B002000 servo driver, analog voltage, pulse train command type, E-v series servo unit SGDV type, large applicable motor capacity: 0.2kw, power supply voltage: single-phase AC100V.
Product Picture Show:
Give birth...
|
|
YASKAWA/Yaskawa SGDV-161H01A Servo Controller Large Capacity
Introduction: YASKAWA/Yaskawa SGDV-161H01A servo controller large capacity, large applicable motor capacity: 30KW, power supply voltage: three-phase AC200V level, design order: A
Product Picture Show:
Basic Product Information:
Buckle: Analog voltage/pulse ...
|
|
Yaskawa SGDV-2R8F01A002000 servo drive 0.4kW
Product Introduction
Σ-V series service unit SGDV type
Large applicable motor capacity: 0.4kW.
Power supply voltage: single-phase AC100V.
Design Order: Type A
Interface: Analog voltage, pulse train command type (for rotary servo motors).
Choose...
|
|
YASKAWA/Yaskawa SGMPS-02A2A21E servo motor medium inertia flat type
Introduction: YASKAWA/Yaskawa SGMPS-02A2A21E servo motor medium inertia flat type, rated output: 200W (0.2kw), power supply voltage: AC200V, design sequence: IP55 (standard), optional: without option
Product Picture Show:
Product Basics ...
|
|
YASKAWA/Yaskawa SGMAV-C2A3A21 servo motor-power supply voltage AC200V
Introduction: YASKAWA/Yaskawa SGMAV-C2A3A21 Servo Motor-Supply Voltage AC200V, Rated Output: 0.1kw (100W), Serial Encoder: 20-Bit Pair Value (Standard), Design Order: Standard, Small Capacity. Low inertia
Product Picture Show:
Product Basics ...
|
|
Yaskawa/Yaskawa SGMAV-08A3A2C-∑-V series servo motor SGMAV type
Introduction: YASKAWA/Yaskawa SGMAV-08A3A2C-∑-V series servo motor SGMAV type, rated output: 0.75kw (750W), power supply voltage: AC200V, serial encoder: 20 bit pair value (standard), design sequence: standard.
Product Picture Show:
...
|
|
YASKAWA/Yaskawa SGDV2R1F11A000000001 fully closed-loop module
Introduction: YASKAWA/Yaskawa SGDV2R1F11A000000001 full closed-loop module, large applicable motor capacity: 0.2kw. Power supply voltage: Single-phase AC100V, interface: MECHATROLINK-I communication command type (for rotary servo motors)
Product Picture Show:
Give birth...
|
|
YASKAWA/Yaskawa SGDV-1R7E11BDC power input servo unit SGDV type
Introduction: Yaskawa/Yaskawa SGDV-1R7E11BDC power input servo unit SGDV type, large applicable motor capacity: 11W, power supply voltage: DC48V, interface: MECHATROLINK-I communication command type (for rotary servo motor)
Product Picture Show:
Basic Product Information:
...
|
|
YASKAWA/YASKAWA SGDV-2R9E21B-MECHATROLINK-III. COMMUNICATION COMMAND TYPE SERVO UNIT
Introduction: YASKAWA/Yaskawa SGDV-2R9E21B -MECHATROLINK-III. COMMUNICATION COMMAND TYPE SERVO UNIT, DC POWER INPUT SERVO UNIT SGDV TYPE, LARGE APPLICABLE MOTOR CAPACITY: 30W, POWER SUPPLY VOLTAGE: DC48V
Product Picture Show:
Basic Product Information:
...
|
|
Yaskawa/Yaskawa medium inertia rotary servo motor SGMJV-04A3A21
Introduction: YASKAWA/Yaskawa medium inertia rotary servo motor SGMJV-04A3A21, rated output: 0.4kw (400W), power supply voltage: AC200V, serial encoder: 20-bit pair value (standard), design sequence: standard
Product Picture Show:
Product base ...
|
|
Yaskawa-Yaskawa single-axis servo unit Σ-7S
Introduction: Yaskawa-Yaskawa single-axis servo unit Σ-7S, belongs to Yaskawa servo Σ-7 series, speed and frequency response of 3.1kHz, strong vibration suppression function (suppression of high-frequency vibration above 500 Hz)
Yaskawa-Yaskawa Single Axis Servo Unit Σ-7S Product Picture Show:
Σ-7S ...
|
|
Yaskawa/Yaskawa servo drive SGDV-R70F01B002000 motor capacity 0.05kw
Introduction: YASKAWA/Yaskawa servo drive SGDV-R70F01B002000 motor capacity 0.05kw, large applicable motor capacity: 0.05kw, power supply voltage: single-phase AC100V, design sequence: type B, optional (hardware): paint treatment
Product Picture Show:
Products...
|
|
Yaskawa SGDV-R90F01B Servo Drive Single-phase AC100V
Product Introduction
Σ-V series service unit SGDV type
Large applicable motor capacity: 0.1kw.
Power supply voltage: single-phase AC100V.
Design order: Type B.
Interface: Analog voltage, pulse train command type (for rotary type and server motors).
...
|
|
YASKAWA/Yaskawa Servo Driver SGDV-2R8F01A Analog Voltage Pulse Train Command Type
Introduction: YASKAWA/Yaskawa servo driver SGDV-2R8F01A analog voltage pulse train command type, ∑-v series servo unit SGDV type, large applicable motor capacity: 0.4kw
Product Picture Show:
Product features: Design order: Type A
Interface...
|
|
Contact
working hours
