Hitec touch screen calibration method

Basic Functions: Display of equipment working status: such as indicator lights, buttons, text, graphics, curves, etc.; Data and text input operations, printouts; Production formula storage, equipment production data recording; simple logical and numerical operations; Can...

(1) Fault 1: Contact deviation Phenomenon 1: The direction of the finger does not coincide with the mouse arrow. Reason 1: After installing the driver, there is no vertical contact with the bullseye when calibrating the alignment. ...

The function of the touch screen is to control the soft relay of the plc, for example, if you use X3 as the start, then you can connect X3 in parallel in the PLC program, for example, M45, set a virtual button in the touch screen, and then set it to M45 action in its characteristics, then when the touch screen and PLC are connected, ...

SW1/SW2 is saved sw3/SW4 ON /ON/ normal operation form of the user ON/OFF/Executor produces burn-in program OFF/ON/Update BIOS OFF/OFF/Perform a hardware test SW5/Communication parameter setting ON/PWS/Hardware-based ...

1) Check whether the connection of the touch screen is right, and whether the connection of a cable connected to the keyboard port of the host (take the working voltage of the 5 volt touch screen from the keyboard port) is connected, please check the connection. 2) Observe the situation of the touch screen controlling the box light, if ...

Shortcoming: 1. Ambient light factor, infrared acceptance tube has the scale of operation between small sensitivity and large illumination, but the contact screen product can not limit the scale of use, from the dark song hall private room to the outdoor use under the high-intensity sunlight on Hainan Island, as a product, it must adapt. ...

China is the shopping mall with the largest demand for human-machine interface in the world, but it is not the shopping mall with the highest sales of human-machine interface products in the world, which shows that low-end human-machine interface users occupy a large share in China. In recent years, the rapid development of national brands, the adoption of low prices and other strategies, is making great progress.

　　10.4 inch PWS6A00T-N PWS6A00T-P 7.5" PWS6800C-N PWS6800C-P 7 inch PWS6700T-N ...

1. Four-wire resistive touch screen: It is not afraid of dust, oil and photoelectric disturbance, and is afraid of scratches is its main defect. It is suitable for public places with fixed users, such as industrial control sites, offices, homes, etc.; 2. Five-wire resistive touch screen: Excellent sensitivity and transmittance ...

1. Use the big buttons as a simple click-through interface Dragging, double-clicking, scrollbars, drop-down menus, various windows, or other elements will confuse some unskilled users, and will also reduce the user's affinity for the product and reduce its efficiency. 2. Full screen ...

The control of the PLC itself is completed by the change of the control register D, the input port X, the soft relay condition M and the time relay T and other condition variables, so as long as the condition of these variables can be corrected, the control of the PLC can be completed, and the touch screen can pass through the 232 or ...

Storage humidity between 10%-90% Temperature -20°C-60°C If the ambient conditions exceed or approach the critical value, condensation will occur inside the display. The power transformer and other coils inside are also prone to leakage when wet, and may even cause a short circuit in the wiring. If you find that the obvious ...

Hitec touch screen software can support the programming of all PWS series touch screens officially provided by Hitec, so that these touch screens can meet the daily work needs of users. You can modify the text, indicators, animations, curves, and so on displayed on the screen. Hitec HMI software is mainly used through ...

NaturalID: NaturalID skills can meet the explosive increase in demand for biometric sensing, from mobile payment transactions and cloud services to enterprise mobile device security, including the entire ecosystem under FIDO (Online Fast Identity Authentication). ...

1. What is the difference between the human-machine interface and the "touch screen" that people often say? In a strict sense, there is a fundamental difference between the two. Because the "touch screen" is only a hardware part that may be used in human-machine interface products, it is a kind of function that replaces the mouse and keyboard.

The touch screen interface is the same as the general interface, in addition to the touch screen interface, other user interfaces include web interface, software interface, game interface and mobile phone interface. Touchscreen interfaces have a lot of similarities with them: basically, they are all interactive systems, and they are all ...

In order to better help you operate the Hitec touch screen, here are some operation methods and tips: If you change the display resolution or display mode of the touchscreen when operating the capacitive touch screen in the middle of the operation, or adjust the refresh rate of the touchscreen controller by yourself...

Programmable manipulators (PLCs) have always played an important role in the field of industrial field control. With the increase of the country's investment in the water supply profession, the level of automation of water plant operation has been continuously improved, and the use of PLC in the water supply profession has gradually increased. The touch screen is used with the PLC, which makes the PLC ...

Touch screen is a new part in today's new product planning, in the past few years there are many touch screen factories born, users may not be able to judge the quality of a touch screen produced by a certain company from the appearance, we propose some simple methods to be able to see the quality of the product from the appearance.

When the contact screen is connected with the PLC, in fact, the memory of the PLC is used, (the contact screen also has a small amount of memory, which is only used to store system data, that is, the screen, controls, etc.), the contact screen and the PLC communication is generally a master/slave connection, that is, the contact screen reads the data from the PLC, and after making a judgment, it is displayed in the display ...