Introduction:LPH-060A1 robot high moment of inertia (0.075kg^2) is supported by large moment of inertia to achieve high degree of freedom hand design. It can be designed for both hands. PLC-free design is realized through the privileged task function, which is combined with the standard privileged task function and the press of the keyboard. The cost of equipment can be further reduced.
Product Details
Arm length (1st arm + 2nd): 300 + 300 600mm
Running angle, stroke and motor capacity
J1 (1st axis): ±133°
J2 (2nd axis): ±153°
Z (3rd axis): 200mm
T (4th axis): ±360°
Axis combination: J1 (1st axis) +J2 (2nd axis) +Z (3rd axis) +T (4th axis)
Maximum handling weight: 6Kg
Standard cycle time (load 1 kg / minus 2 kg) (*2): 0.39 / 0.42 sec
Maximum crafting speed
Arm tip: 5.073mm/sec
Z：1 .111mm/sec
T：2.000deg/sec
Repeatability (center of the tool mounting surface) (*3)
J1+J2：±0.02mm
Z：0.02mm
T：±0.01°
Maximum input pressure (downward, less than 1 second): 350N (within 1 second)
Maximum allowable inertia torch (inertia): 0.023kgm2
Position detection method: absolute encoder
Drive Motor/Brake: Full Axis AC Hefu Motor / Z-Axis with Brake
User Air Piping: 3 systems (medium 4x1, Q6x2)
User signal line: 15 cores (signal money for proximity sensors, etc.)
Air source
Commonly used pressure: 0.05-0.35MPa
Maximum allowable pressure: 0.6MPa
Mass: about 20 kg
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the DENSO/DENSO industrial robot LPH-060A1 load 6Kg product, the purpose of 76 technology is to survive by quality, develop by reputation, and eternity by service, give us a chance, and give you a surprise.
|
More on that
|
DENSO/DENSO VP-6242 6-axis assembly Load 2.5Kg
Product Introduction: DENSO/DENSO Vertical Articulated Robot VP-6242 is small but full of horsepower. The main body weighs only 13 kg (6-axis type). Compact and lightweight, easy to carry and install. It can also flexibly respond to changes in the layout of the factory. The setting area is 160×160mm, which is equivalent to the size of two postcards.
|
|
DENSO/DENSO Vertical Articulated Robot VM-60B1 Arm width 130mm
Introduction: DENSO/DENSO The VM-60B1 vertical articulated robot has a long arm distance and a large handling mass in the vertical articulated manipulator. The operating field is 1298mm, the carrying mass is 13kg, and the standard cycle time is 0.95 seconds.
...
|
|
DENSO/DENSO Vertical Articulated Robot VS-6577 has an arm span of 854mm
Introduction: DENSO/DENSO VS-6577 is compact and compact, with high speed and high handling performance. The operating field is 854 mm, the carrying mass is 7 kg, and the standard cycle time is 0.59 seconds.
...
|
|
DENSO/DENSO Robot LZSS Load 3kg Arm span 12000mm
Introduction: With a maximum load capacity of 3 kg and a maximum working area of 12,000 mm, the compact design of the DENSO robot LZSS makes it possible to create equipment suitable for handling workpieces between various processes.
Product parameters
...
|
|
DENSO/DENSO Medical & Pharmaceutical Robot VS-050S2 Payload 4Kg Arm length 520mm
Product introduction:DENSO/DENSO Medical & Pharmaceutical Robot VS-050S2 is sterilization resistant and can be used in sterilization environments such as H202 gas at a concentration of 35% (dry and wet) and UV irradiation, as well as in a dust-free environment. The surface is shaped to be non-adhesive to dust and dirt, and the arm is screw-free ...
|
|
DENSO/DENSO Vertical Articulated Robot VM-60B1 130mm
Introduction: DENSO/DENSO The VM-60B1 vertical articulated robot has a long arm distance and a large handling mass in the vertical articulated manipulator. The operating field is 1298mm, the carrying mass is 13kg, and the standard cycle time is 0.95 seconds.
Give birth...
|
|
DENSO/DENSO Vertical Articulating Robot VMB-2015 weighs 215kg
Introduction: The DENSO/DENSO Vertical Articulated Robot VMB-2015 is suitable for handling large items and palletizing work, reducing the burden on workers handling heavy loads.
Features:
Get rid of external wiring/piping
By improving user wiring, pipelines, ...
|
|
DENSO/DENSO Vertical PON VM Series 5-6 axes
Introduction: The slender body of the DENSO/DENSO VT VM series achieves high speed, high precision, and high efficiency, and is equipped with standard stops on each axis to ensure safety when the robot arm body is prevented from falling when the power is very stopped or when the power is off.
...
|
|
DENSO/DENSO Robot XR-4372 Payload 5kg Reach 760mm
Introduction: The DENSO/DENSO XR-4372 is a lift-mounted structure with a straight-acting axis and a rotary axis, which enables operation directly under the robot and can be combined with compact equipment.
Features:
The slim structure allows the device to be wide ...
|
|
DENSO/DENSO Robot RC7M Controller Storage 3.25 MB
Description: The DENSO/DENSO Robot RC7M controller is the smallest in its class (440 x 425 x 152.4 mm) and can be programmed offline using the WINCAPS III 3D simulation software and remotely monitored by the robot.
...
|
|
DENSO/DENSO horizontal articulated robot HSR065 Payload 8Kg
Product introduction: DENSO/DENSO horizontal articulated robot HSR065 achieves high-level high-speed operation. By increasing the CPM (revolutions per minute), it is possible to operate at high speeds for a long time. New design, high rigidity, lightweight robotic arm. High rigidity and light weight to achieve high transportable mass (8 ...
|
|
The DENSO/DENSO VM1800 vertical articulated robot has a mass of approx. 220 kg
Introduction: The DENSO/DENSO Vertical Articulated Robot VM1800 is suitable for handling and palletizing large items, and can reduce the burden on workers handling heavy loads. The operating field is 1804mm, and the carrying weight is 25kg.
...
|
|
DENSO/DENSO horizontal articulated robot HSR048A1-N/S assembly handling
Product introduction: The DENSO/DENSO horizontal articulated robot HSR048A1-N/S achieves the highest level of high-speed operation. By increasing the CPM (revolutions per minute), it is possible to operate at high speeds for a long time. New design, high rigidity, lightweight robotic arm. High rigidity and light weight, to achieve high transport...
|
|
DENSO/DENSO Robot VLA-4025 40kg 2503mm
Introduction: The VLA-4025 vertical articulated robot from DENSO can be used for handling large items and palletizing work, reducing the burden on workers handling heavy loads.
Features:
High grip and long reach
...
|
|
DENSO/DENSO Robot HM-4A85 Load 20kg Reach 850mm
Introduction: The DENSO/DENSO robot uses a high-power AC servo motor to improve control performance, and the cycle time has reached the highest level in its class. At the same time, the repeatability of positioning is ±0.02mm——, which can quickly complete precise and meticulous operations. Outstanding high speed and precision of work, in ...
|
|
DENSO/DENSO VS-087 Vertical Articulated Robot with a permissible torque of 16.2 Nm
Introduction: The DENSO/DENSO VS-087 vertical articulated robot has a high level of high-speed performance in its class, which can achieve a significant increase in productivity. The operating field is 905 mm, the carrying weight is 7 kg, and the standard cycle time is 0.34 seconds.
...
|
|
DENSO/DENSO vertical articulated robot VL2500 has a full arm length of 2085.5mm
Introduction: The VL2500 DENSO/DENSO vertical articulated robot is used for handling large items and palletizing work, reducing the burden on workers handling heavy loads. The action field is 2503mm, and the carrying weight is 40kg.
Give birth...
|
|
DENSO/DENSO Vertical Articulated Robot VM-6083 Field 1021mm
Introduction: DENSO/DENSO Vertical Articulated Robot VM-6083 has a long arm distance and a large carrying mass in a vertical articulated robot. The operating field is 1,021 mm, the carrying mass is 13 kg, and the standard cycle time is 0.89 seconds.
...
|
|
DENSO/DENSO VS1500 has a payload of 25 kg
Introduction: The DENSO/DENSO Vertical Articulated Robot VM1500 is suitable for handling and palletizing large items, and can reduce the burden on workers handling heavy loads. The operating field is 1506mm, and the carrying weight is 25kg.
...
|
|
DENSO/DENSO VP-5243 5-axis payload 3Kg
Product Introduction: DENSO/DENSO Vertical Articulated Robot VP-5243 is small but full of horsepower. The main body weighs only 13 kg (5-axis type). Compact and lightweight, easy to carry and install. It can also flexibly respond to changes in the layout of the factory. The setting area is 160×160mm, which is equivalent to the size of two postcards.
|
|
Contact
working hours
