type | AC power supply model | DC power supply type |
Model | CP1E-□□□S□D□-A
CP1E-□□□D□-A | CP1E-□□□S□D□-D
CP1E-□□□D□-D |
structure | Built-in control cabinet type |
shape
Height× thickness × width | Type E/N/NA□□
10-point I/O type (CP1E-E10D□-□): 90 mm (*1×), 85 mm (*2), × 66 mm
14/20 I/O type (CP1E-□14/20D□-□): 90 mm (*1) × 85 mm (*2) × 86 mm
30-point I/O type (CP1E-□30D□-□): 90 mm (*1), 85 mm (*2), ×× 130 mm
40-point I/O type (CP1E-□40D□-□): 90 mm (*1×), 85 mm (*2), × 150 mm
60-point I/O type (CP1E-N60D□-□): 90 mm (*1×), 85 mm (*2), × 195 mm
Analog built-in 20-point I/O type (CP1E-NA20D□-□): 90 mm (*1), × 85 mm (*2), × 130 mm
E/N□□S(1) type
14/20 I/O type (CP1E-E14/20SD□-□): 90 mm (*1), × 79 mm (*2), × 86 mm
30-point I/O type (CP1E-□30S(1)D□-□): 90 mm (*1×), 79 mm (*2), × 130 mm
40-point I/O type (CP1E-□40S(1)D□-□): 90 mm (*1), × 79 mm (*2), × 150 mm
60-point I/O type (CP1E-□60S(1)D□-□): 90 mm (*1×), 79 mm (*2), × 195 mm |
weight | 10-point I/O type (CP1E-E10D□-□): 300g or less
14-point I/O type (CP1E-□14(S)D□-□): 360g or less
20-point I/O type (CP1E-□20(S)D□-□): 370g or less
30-point I/O type (CP1E-□30(S□)D□-□): 600g or less
40-point I/O type (CP1E-□40(S□)D□-□): 660g or less
60-point I/O type (CP1E-□60(S□)D□-□): 850 g or less
Analog built-in 20-point I/O type (CP1E-NA20D□-□): 680g or less |
electricity
source
rules
case | Supply voltage | AC100～240V 50/60Hz | DC24V |
Allowable supply voltage | AC85～AC264V | DC20.4～DC26.4V |
Power consumption | 15VA/AC100V or less
25VA/AC240V or less
(CP1E-□10/14/20(S)D□-A) | 9W or less (CP1E-E10D□-D)
13W or less (CP1E-N14/20D□-D) |
50VA/AC100V or less
70VA/AC240V or less
(CP1E-□30/40/60(S□)D□-A
CP1E-NA20D□-A) | 20W or less
(CP1E-N30/40/60(S□)D□-D
CP1E-NA20D□-D))(＊4) |
Inrush current | AC120V 20A/8ms or less (at room temperature and cold start)
AC240V 40A/8ms or less (at room temperature cold start) | DC24V 30A/20ms or less
(at room temperature cold start) |
Externally supplied power supply
(＊3) | None (CP1E-□10/14/20(S)D□-A)
DC24V 300mA or less
(CP1E-□30/40/60D□-A
CP1E-□30/40/60SDR-A
CP1E-NA20D□-A) | not |
Insulation resistance | Between all AC external terminals and GR terminals
20MΩ or more (DC500V insulation resistance meter) | The DC primary power supply and the DC secondary power supply are not insulated. |
Pressure-resistant | Between all AC external terminals and GR terminals
AC2, 300V 50/60Hz 1 min. Leakage current 5mA or less | The DC primary power supply and the DC secondary power supply are not insulated. |
Power-off time detection | More than 10ms | More than 2ms |
should
use
ring
border | Use ambient temperature | 0 ～55℃ |
Use ambient humidity | 10～90%RH |
Atmospheric environment | No corrosive gases |
Store at ambient temperature | -20~+75°C (excluding batteries) |
Use levels | 2,000m or less |
Pollution level | Pollution class 2 and below: according to IEC 61010-2-201 |
Anti-interference performance | IEC 61000-4-4 compliant 2kV (power cord) |
Types of overvoltages | Category II.: IEC 61010-2-201 |
EMC immunity rating | Area B |
Vibration resistant | Complies with JIS C60068-2-6
5~8.4Hz amplitude 3.5mm, 8.4~150Hz
Acceleration 9.8 m/s2 100 minutes each in the X, Y, and Z directions
(Scan time 10 minutes × number of scans 10 times = total 100 minutes) |
Impact-resistant | Complies with JIS C60068-2-27
147m/s2 3 times in each direction of X, Y and Z |
Terminal blocks | Fixed (non-detachable) |
Terminal screw size | M3 |
Applicable Standards | EC Directive |
Grounding method | Type D Grounding (Type 3 Grounding) |
Contact
working hours
