Omron/Omron NX series system units NX-PD/PF/PC/TBX

Create Date: 2024-8-30 12:03:23|Source: Omron/Omron

Previous
Next
Brand:
Omron/Omron

Origin:
Japan

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
NX Series System Units

Product Introduction
Omron/Omron NX series system units NX-PD/PF/PC/TBX, space-saving 12mm wide design

quality assurance

Attentive service

Secure transactions

Product Description

Product Advantages:

Provides additional unit power and I/O power to NX Series remote I/O terminals.

Screw-free terminal blocks significantly reduce wiring effort.

Space-saving 12mm wide design.

The NX cell power supply unit allows the expansion of I/O configurations beyond the maximum power capacity of the EtherCAT connector.

The I/O power supply unit is used when the total allowable I/O current per feeder termination is exceeded, or when the I/O power supply is to be split into multiple groups.

The I/O power connection unit can be used as an additional power terminal for the connected sensors and actuators.

The FG terminal extension unit can be used as a ground terminal for wire shielding.

Detachable screw-free terminal blocks make commissioning and maintenance easier.

Omron/Omron NX series system units NX-PD/PF/PC/TBX

　　Product Introduction

project		specification
Protection		Cabinet mounted type
Grounding method		Ground to 100Ω or less
Use environment	Use ambient temperature	0～55°C
	Use ambient humidity	10%~95% (no condensation or icing)
	air	There must be no corrosive gases.
	Store at ambient temperature	-25~70°C (no condensation or freezing)
	height	2,000 m or less
	Degree of contamination	2 or below: IEC 61010-2-201
	Noise-resistant	Power cord 2kV (in accordance with IEC61000-4-4 standard.) )
	Overvoltage level	Class II: according to IEC 61010-2-201
	EMC immunity level	Zone B
	Vibration resistant	IEC 60068-2-6 compliant. 5~8.4Hz (amplitude 3.5mm), 8.4~150Hz, acceleration 9.8m/s2, 100 minutes each in X, Y, and Z directions (10 scans every 10 minutes = 100 minutes in total)
	Impact-resistant	IEC 60068-2-27 compliant. 147 m/s2, 3 times in the X, Y, and Z directions
Applicable Standards		cULus: UL508 and ANSI/ISA 12.12.01 certified. EC: EN 61131-2 and C-Tick, KC registered

More on that

	Omron CP2E-ECM EtherCAT is a built-in CPU unit advantage Meet the evolving needs of multi-axis and informatization of small equipment It can meet the needs of simple equipment automation Equipped with dual networks: EtherCAT bus + EtherNet communication Easily implement multi-axis motion control and networking requirements 　　Product Introduction ...
	Omron CJ Series Input Unit 8-point DC input unit (with terminal block) Product Introduction High-speed input models are available to meet a variety of applications. ON response time: 15 μs, OFF response time: 90 μs The DC24V, AC100V, and AC200V models can be used to connect devices with different output types. It is possible to connect the DC24V model ...
	Omron CJ1W-OD211 plc module can be controller Omron PLC is a compact PLC with complete functions, which can provide high value-added machine control for conveying and decentralized control; It also has the ability to be upgraded through a variety of built-in boards, large program capacity and memory units, and software development capabilities in the Windows environment. Omron PLC also ...
	Omron NX1P2 Machinery Automation Controller Built-in control cabinet Product Introduction
	Omron CP1W-TS Temperature Sensor Unit 250ms/4 points advantage Expansion units provide rich scalability Temperature control function 　　Product Introduction
	Omron CP1E CP Series CP1E CPU Unit 2,000m or less Product Advantages: Achieve breakthrough low costs Expand the possibilities of plant control and become internationally competitive. The operation is simple and the interface is friendly Simple input editor with smart input function Easy input editor Command and address input auxiliary functions ...
	Omron Safety CPU Unit NX-SL3300/SL3500 Type 3 Grounding peculiarity EN ISO 13849-1 (PLe/Safety Category 4), IEC 61508 (SIL3) certified With Safety over EtherCAT (FSoE)*, a mix of standard and safety controls can be implemented on the same EtherCAT The safety CPU unit controls up to 128 ...
	Omron CPU Unit NX Series NX701 Control cabinet built-in type peculiarity Equipped with an Intel® Core™ i7 quad-core processor, it can perform double-precision floating-point arithmetic at high speed in addition to basic instructions on ladders Combines timing control and motion control into a single CPU IEC61131-3 (and JIS B 3503) compliant ...
	The Omron CP1L is a high-performance programmable controller with embedded Ethernet Product Advantages: "CP1L-EM type" and "CP1L-EL type" with Ethernet communication function as standard Pulse output function Equipped with 2 axes as standard, it is extremely powerful for high-precision positioning control High-speed counter function Single-phase 4-axis as standard, multi-axis can be easily realized with just 1 unit ...
	Omron Programmable Controller CP2E Stable temperature control peculiarity It is a combination of functions that meet the needs of small-scale installations Meet the needs of visualization of plant health and production status Networking and modularization of devices [CP2E-N] Meets the increasing demand for peripherals [CP2E-N] It can also be easily implemented ...
	The Omron/Omron NX-TC control cabinet is a built-in NX series temperature control unit
	OMRON MY2N-GS DC24 by OMZ/C INTERMEDIATE RELAY Product introduction: OMRON Intermediate Relay MY2N-GS DC24 BY OMZ/C DC 24VDC 2NO+2NC 7A Specifications: Series: MY-GS Model: MY2N-GS DC24 BY OMZ/C Category: Intermediate relays Control Coil Type: Straight ...
	Omron's NX-AD cabinet-mounted NX series analog input units peculiarity Up to 8 analogue inputs per unit. You can choose between a free-running refresh or a synchronous I/O refresh using the NX series EtherCAT connectors. The input update cycle is 10μs/channel and the resolution is 1/30000, which is suitable for high-speed measurement and high-precision control.
	Omron Platinum Resistance CJ Series Process Analog I/O Unit CJ1W-PTS Features: Up to four inputs are supported in one cell: platinum resistance, thermocouple, and DC current/voltage. (Set the input type separately for each input.) ） Insulation between input channels prevents unwanted current paths between input channels. Input Voltage/Electricity ...
	The Omron CP1 programmable controller is equipped with Ethernet communication function Product Advantages: Equipped with Ethernet communication function In order to improve production efficiency and quality, it is necessary to grasp the situation at the production site. The CP1H-EX and CP1L-EM/EL models equipped with Ethernet communication ports can be connected to a PC without the use of expansion units and options.
	Omron CP1W-AD/DA/MAD PLC 4-point analog input advantage Expansion units provide rich scalability In addition to a wide variety of I/O units, high-performance, multi-point analog units have been added. The analog unit has up to 4 analog inputs and 4 analog outputs in one expansion unit, supporting a high resolution of 12,000 ...