Hitec touchscreen copy program

TWO HITECH TOUCH SCREEN COPY PROGRAM METHODS: 1. Make a communication cable first. HMI1 COM port HMI2 COM port 25-pin female 25-pin female 　　​ 　　RXD 3 ...

Correct equipment, operation and maintenance of reducer is an important part of ensuring the normal operation of mechanical equipment. Therefore, in your device, first check whether the wiring interface is loose, and then check whether the serial port and interrupt number are conflicting, if there is resistance, you should adjust the resources to avoid resistance. Look again ...

The touch screen interface is the same as the general interface, in addition to the touch screen interface, other user interfaces include web interface, software interface, game interface and mobile phone interface. Touchscreen interfaces have a lot of similarities with them: the most basic thing is that they are all interactive systems, and they are all ...

There are two recommended ways to set up the alarm display on the touch screen: 1. Place the alarm window in the template, so that when the alarm occurs, no matter which screen the alarm window is on, it will automatically pop up, so that the operator can obtain the alarm information. ...

Tablet PC, also known as industrial contact tablet, is an inductive LCD display device that can transmit keying signals such as auxiliary contacts, when touching the graphic buttons on the display screen, the haptic feedback system on the display screen can drive various connected devices according to the pre-programmed program, which can ...

1. The resolution needs to be fixed Every time the screen resolution of the industrial touch film screen is adjusted, there will be some shifts, and the solution is to manually adjust or restart the machine, but this frequent adjustment is not good for the machine. ...

When the contact screen is connected with the PLC, in fact, the memory of the PLC is used, (the contact screen also has a small amount of memory, which is only used to store system data, that is, the screen, controls, etc.), the contact screen and the PLC communication is generally a master/slave connection, that is, the contact screen reads the data from the PLC, and after making a judgment, it is displayed in the display ...

There are two recommended ways to set up the alarm display on the touch screen: 1. Place the alarm window in the template, so that when the alarm occurs, no matter which screen the alarm window is on, it will automatically pop up, so that the operator can obtain the alarm information. ...

To improve the anti-disturbance ability of the PLC system, we can select products with higher anti-disturbance ability when carrying out the anti-disturbance planning of detailed engineering, and adopt methods such as pressing the disturbance source, blocking or attenuating the propagation path of electromagnetic disturbance, and using software means to improve the anti-disturbance of the equipment and system.

function For the convenience of operation, people use the touch screen instead of the mouse or keyboard, the touch screen is a smart device that can display and communicate with the PLC, and also has memory and programming capabilities. We can pass ...

1. The difference between human-machine interface and configuration software Human-machine interface products, often referred to as "touch screen", include HMI hardware and corresponding special screen configuration software.

The touch screen interface is the same as the general interface, in addition to the touch screen interface, other user interfaces include web interface, software interface, game interface and mobile phone interface. Touchscreen interfaces have a lot of similarities with them: basically, they are all interactive systems, and they are all ...

Imprecise screen orientation: can be positioned from scratch by the driver software. Contact orientation and screen cursor inversion: When the device touches the screen, the orientation of the screen is inverted, please adjust the contact screen orientation according to the guidelines of the right-hand orientation. ...

In order to better help you operate the Hitec touch screen, here are some operation methods and tips: If you change the display resolution or display mode of the touchscreen when operating the capacitive touch screen in the middle of the operation, or adjust the refresh rate of the touchscreen controller by yourself...

The contact screen of mobile phone capacitive contact screen and resistance contact screen are mainly different in contact sensitivity, accuracy, cost, multi-point contact feasibility, damage resistance, cleaning, and sunlight visibility. Contact sensitivity, 1 ...

(1) Fault 1: Contact deviation Phenomenon 1: The direction of the finger does not coincide with the mouse arrow. Reason 1: After installing the driver, there is no vertical contact with the bullseye when calibrating the alignment. ...

1. Four-wire resistive touch screen: It is not afraid of dust, oil and photoelectric disturbance, and is afraid of scratches is its main defect. It is suitable for public places with fixed users, such as industrial control sites, offices, homes, etc.; 2. Five-wire resistive touch screen: Excellent sensitivity and transmittance ...

Touch screen dimming fault phenomenon: The touch screen has darkened and the colors are not displayed normally, but there is no problem with the operation. Fault profiling : The reason for this state of affairs may be that in the 2000s ...

Storage humidity between 10%-90% Temperature -20°C-60°C If the ambient conditions exceed or approach the critical value, condensation will occur inside the display. The power transformer and other coils inside are also prone to leakage when wet, and may even cause a short circuit in the wiring. If you find that the obvious ...

1. Reporting rate: too fast, the CPU can not respond in time, which may cause drops, and the line is easy to break 2. Accuracy: 99% accuracy 3. Sensitivity: less than two ounces of force can be sensitized, less than 3ms fast response 4. Resolution: with the X, Y axis ...