Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It can assist in monitoring the opening and closing status and locking status of the door separately to meet different on-site needs. Equipped with manual unlock key and LED indicator as standard.
Locking and unlocking during power outages and maintenance can be performed by manually unlocking the key.
The indicator light of the independent circuit can be used for a variety of purposes.
There are two types of locking mechanisms: the spring-locked type, which is unlocked by electromagnetic coil excitation, and the electromagnetic locking type, which is locked by electromagnetic coil excitation.
- Wide operating temperature range from 20 to +55ºC.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces IDEC/Izumi HS1L electromagnetic safety switch HS1L-DQ7Y4KMSR-G products, if you are interested in IDEC/Izumi, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
IDEC/Izumi HE1G Handheld Enabling Switch HE1G-20MB
3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.
Pressing ON ⇒ OFF is a direct open-circuit action function.
By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state.
（IEC60204-1； 9.2.5.8 ...
|
|
IDEC/Izumi Safety Interlock HS6B Subminiature Safety Interlock Switch HS6B-12B01
IDEC/Izumi Safety Interlock HS6B Subminiature Safety Interlock Switch HS6B-12B01 2NC 1NO Contact, 1m Cable
30x15x78mm enclosure
One-piece cables reduce wiring time
IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage)
Open directly ...
|
|
IDEC/Izumi HS5E-KVA0L05-2C502 Safety switch with key lock
VA circuit, key removal at LOCK position, key 502,5m cable, rear unlock button
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the locked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
We start with ...
|
|
IDEC/Izumi HS5E-KVD003-2C502 Safety switch with key lock
VD circuit, unplug the key at the LOCK position, key 502, 3m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key Removal Position Removed in the locked position
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length 3 meters
Our customer-centric ...
|
|
IDEC/Izumi HE6B Enabling Switch HE6B-M211B
Compact 3-position enable switch with auxiliary contacts.
Ergonomic OFF→ ON → OFF 3-position action for hazard avoidance.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed.
IEC60204-1（2005） ...
|
|
IDEC/Izumi HE2B Enabling Switch HE2B-M200PB
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 2 ⇒ 3 requires force and a clear sense of operation.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...
|
|
IDEC/Izumi HS5B Safety Switch HS5B-02ZBM
Small size: 30mm× 30mm×90mm, by changing the mounting direction of the top, the actuator can be inserted from 8 positions, so as to meet different installation needs.
IP67 (IEC60529) protection structure is used for the contact parts.
The NC contact has a direct disconnect operation structure. （IEC/EN60947 ...
|
|
IDEC/Izumi HS5E-K Series Key-Locking Safety Switch HS5E-KVD0L05-2B502
The operating head detachment detection function is standard.
The key is made of a high-security bullet lock. There are 16 key numbers to choose from.
There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame.
Adopt a small negative ...
|
|
IDEC/Izumi HE1G Handheld Enabling Switch HE1G-21SMB
3 position action of OFF ⇒ ON ⇒ OFF to avoid danger.
Pressing ON ⇒ OFF is a direct open-circuit action function.
By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state.
（IEC60204-1； 9.2.5.8 ...
|
|
IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-DH5LH Door Handle Actuator (Left.)
IDEC/Izumi Safety Interlock HS5L Micro Lock HS9Z-DH5LH Door Handle Actuator (Left.)
Doorknob Actuator Handle Unit, Left Hand Door
Product Category: Door Handle Actuators
The company has always been customer-centric, the concept of creating value for customers, winning the market with quality and service, ...
|
|
IDEC/Izumi HS5D Safety Switch HS5D-11RN
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
IDEC/Izumi HS5E-KVA0L05-2A safety switch with key lock
VA circuit, key removable in all positions, 5m cable, rear unlock button
Mechanical Specifications:
Product Category Safety Interlocks
Key removal location for all positions
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
Our customer-centric service ...
|
|
IDEC/Izumi HS5B Safety Switch HS5B-02B
Small size: 30mm× 30mm×90mm, by changing the mounting direction of the top, the actuator can be inserted from 8 positions, so as to meet different installation needs.
IP67 (IEC60529) protection structure is used for the contact parts.
The NC contact has a direct disconnect operation structure. （IEC/EN60947 ...
|
|
IDEC/Izumi HS1L Solenoid Safety Switch HS1L-R44KMSRM-R
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP7015
By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored.
Ideal for installation on protective doors where positioning is difficult.
With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VD44ZLSM-G
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VD44ZLSM-G 4 contacts 2NC and 2NC, spring lock, rear unlock button, side conduit
5000N locking force is the smallest in the industry
Spring-loaded terminals prevent loose wires
Energy saving 200mA solenoid consumption
Electromagnetic locks are available ...
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-R7Y4KMSR-G
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS5D Safety Switch HS5D-11RNP
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-DQ44KMSRP-G
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS5E-K Series Key Locking Safety Switch HS5E-KVD0L05-2A
The operating head detachment detection function is standard.
The key is made of a high-security bullet lock. There are 16 key numbers to choose from.
There is a rear unlock button type for emergency evacuation and other purposes, and it can be attached to the rear lock release button unit attached to the aluminum frame.
Adopt a small negative ...
|
|
Contact
working hours
