Japan SMC_CY1SG10-100Z Rodless Actuator 0.7 MPa rubber cushioning

Create Date: 2024-8-30 12:03:23|Source: SMC

Previous
Next
Brand:
SMC

Origin:
Japan

Price:
Please contact customer service

Delivery time:
Please contact customer service

Model:
CY1SG10-100Z

Product Introduction
SMC 100mm stroke 0.7 MPa rodless actuator CY1SG10-100Z, 10mm bore, rubber cushioned, M5 x 0.8 port connection, 0.08 kg@ 50 mm

quality assurance

Attentive service

Secure transactions

Product Description

CY1SG10-100Z Introduction: SMC 100mm stroke 0.7 MPa rodless actuator CY1SG10-100Z, 10mm bore, rubber cushioned, M5 x 0.8 port connection, 0.08 kg@ 50 mm

Japan E:\Processed\5142.jpg

Model features introduced

SMCCDY1S10-15mm diameter cylinder

The cylinder is magnetically coupled to the piston - no seal is required, so it avoids leakage and provides automatic switching of high load capacity

SMCCDY1S10-15mm diameter cylinder
medium	air
Test the pressure	10.5bar
Minimum working pressure	1.8bar
Maximum operating pressure	7Bar
Ambient and fluid temperatures	5-60°C
Piston speed*	50-400mm/s
liner	There are rubber pads at both ends
Body material	aluminium
End cap material	aluminium
lube	No, you don't
Wiring port size	M5
Installation	level
Mounting nuts	Standardized, only for basic types (2 pieces)
retentivity	10mm bore: 5.5kgf15mm bore: 14kgf
The pressure corresponds to the holding force	10mm bore: 7.0kgf/cm215mm bore: 7.9kgf/cm2
*If the switch is installed in the middle of the stroke, the piston speed will not exceed 300mm/s.

Note: If the load exceeds the holding force of the magnet, the frame may detach from the internal magnet. In this case, the frame should be pushed by hand to the end of the stroke (or the piston should be moved by air pressure) to re-couple the piston frame to the piston.

Model parameters are introduced

attribute	numeric value
calibre	10mm
itinerary	100mm
Maximum operating pressure	0.7MPa
Absolute maximum pressure	1.5Mpa
Buffer type	rubber
Port connections	M5x0.8
size	176x60x34mm
weight	430g
width	60mm
length	176mm
height	34mm
Size type	standard

All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original genuine products, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, save money.

This article introduces the Japan brand SMC model as CY1SG10-100Z, the introduction of this product is: SMC 100mm stroke 0.7 MPa rodless actuator CY1SG10-100Z, 10mm aperture, rubber buffer, M5 x 0.8 port connection, 0.08 kg@ 50 mm, the purpose of 76 technology is to survive by quality, develop by reputation, and eternity by service, give us a chance and give you a surprise.

More on that

	Japan SMC_AS2201F-01-08SA In-line speed controller AS2201F-01-08SA Introduction: SMC AS Series Flow Controllers AS2201F-01-08SA, 1 (Operating) MPa, 1.5 (Proof) MPa Maximum Outlet Pressure Japan SMC_AS2201F-01-08SA photo show Model features introduced In-line speed controller with ...
	Japan SMC_Y-G04 Double Joint Joint for 40mm Drilled Piston Rod U-Shaped Earrings Y-G04 Introduction: SMC Y Series Double Joint Joint Y-G04, suitable for 40mm drilling Japan SMC_Y-G04 photo show Model features introduced CG1 piston rod U-shaped earrings SMC's double U-hook mount is suitable for use with CG1 series actuators. Model parameters are introduced ...
	Japan SMC_TRB0806BU-20 20m Blue Nylon Air Hose 1 MPa TRB0806BU-20 Introduction: SMC TRB Series 20m Blue Nylon, PVC TRB0806BU-20 Air Hose, 1 MPa @ 20 °C Working Pressure Japan SMC_TRB0806BU-20 picture display Model features introduced Flame retardant pipe TRB series SMC's flame retardant pipes are suitable for ...
	Japan SMC_ASV310F-01-06S Adjustable Exhaust Valve R1/8 Male Thread ASV310F-01-06S Introduction: SMC ASV Series Adjustable Exhaust Valve ASV310F-01-06S, R 1/8 Male Thread Connection, 6mm Hose Connection, 0.1 → 1Mpa Japan SMC_ASV310F-01-06S photo show Model features introduced SMC adjustable fast drain valve Overall...
	Japan SMC_CG-L032 Mounting Leg Axial Foot Suitable for 32mm drilling CG-L032 Introduction: SMC CG Series Axial Foot CG-L032, suitable for 32mm drilling Japan SMC_CG-L032 Picture show Model features introduced CG1 mounting feet (Available in pairs) Model parameters are introduced All suppliers of 76 Technology have been strictly audited to ensure that ...
	Japan SMC_AC30-02-A Filtration Decompression Oil Mist Triple Kit AC Series Introducing AC30-02-A: SMC AC Series Rc 1/4 Filtered Decompression Mist Triple Kit AC30-02-A, manual drain, 5μm filter size, -5 → +60°C Japan SMC_AC30-02-A Photo show Model features introduced FRL combination unit, 8.5 bar SMC's modularity ...
	Japan SMC 5-way pneumatic valve VFA1000 It is equipped with a cartridge base for VF1000/3000/5000 series Flow characteristics 4/2→5/3(A/B→EA/EB) C[dm3/( s・bar)]: 0.53 Flow characteristics 4/2→5/3(A/B→EA/EB) b: 0.28 Flow characteristics 4/2→5/3(A/B→EA/EB) Cv: 0 ...
	Japan SMC Peltier thermostat/cabinet mounted HECR High space utilization: can be placed in a 19-inch mounting cabinet. Since the cabinet can be used to install multiple devices, it saves space. ・Temperature stability: ±0.01°C-0.03°C. ・Set temperature range: 10°C-60°C. ・Cooling capacity: 200W, 400W, 510W, ...
	Japan SMC_AW30-F03B-B Modular Filter Regulator 3/8 in threaded port AW30-F03B-B Introduction: SMC AW30 Series G 3/8 Filter Regulator Kit AW30-F03B-B, 5μm filter size, 3/8 in threaded port, 10 bar, -5 → +60°C Japan SMC_AW30-F03B-B photo show Model features introduced Modular Filter Regulator ...
	Japan SMC_Y-G02 Double Joint Joint Piston rod U-shaped earrings are suitable for 20mm drilling Y-G02 Introduction: SMC Y Series Double Joint Joints Y-G02, suitable for 20mm drilling Japan SMC_Y-G02 photo show Model features introduced CG1 piston rod U-shaped earrings SMC's double U-hook mount is suitable for use with CG1 series actuators. Model parameters are introduced ...
	Japan SMC_CG-T020 trunnion pins fit 20mm drilling CG-T020 Introduction: SMC CG Series Trunnion Pin CG-T020, suitable for 20mm drilling Japan SMC_CG-T020 picture Model features introduced CG1 trunnion mounting Model parameters are introduced All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods are ...
	Japan SMC Pressure Gauge GA36 Series Color-coded type with limit indicator. Size (outer diameter): φ37.5 Connecting thread: R1/8 All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, insisting on ...
	Japan SMC Digital Flow Sensor for Water / Manifold PF3WB/C/S/R Japan SMC Digital Flow Sensor for Water / Manifold PF3WB/C/S/R Applicable fluid: water, ethylene glycol aqueous solution ・Space-saving Up to 85% reduction in footprint Up to 65% reduction in weight ・No piping: Up to 45% reduction in man-hours ・Compatible with IO-Link ・3 colors, 2 ...
	Japan SMC_C85L16B feet C85L16B, suitable for 12 mm, 16 mm drilling C85L16B Introduction: SMC C85 Series Feet C85L16B, suitable for 12 mm, 16 mm drilling Japan SMC_C85L16B picture show Model features introduced fittings The SMCC85 pneumatic cylinder foot mount is sold separately with lock nut or as a pair. Foot mounting, suitable for ...
	Japan SMC Residual Pressure Relief 3-Way Valve with Keyhole VHS40W-D Flow Characteristics Increase: **88% More (VHS40-04-D) ・Energy saving: Zero outgassing when switching with a knob ・Compatible with OSHA (United States Occupational Safety and Health Administration) standards ・Safety measures: Prevent accidents caused by accidental gas supply 2-step operation type with display window ・Reduction of pressure drop, ...
	Japan SMC_L5050 Feet L5050 for 50mm drilling Accessories L5050 Introduction: SMC L Series Feet L5050, suitable for 50mm drilling Japan SMC_L5050 picture display Model features introduced CP95/CP96 - Annex Model parameters are introduced All suppliers of 76 Technology have undergone strict audits to ensure that all sources of goods come from manufacturers or ...
	Japan SMC_ARX20-F02BG Pneumatic Regulator G 1/4 port connection 60L/min ARX20-F02BG Introduction: SMC ARX20 Series 0.05 → 0.85Mpa 60L/min Pneumatic Regulator ARX20-F02BG, 2Mpa Max Input Pressure, G 1/4 Port Connection Japan SMC_ARX20-F02BG photo show Model features introduced Piston adjuster, ARX series ...
	Japan SMC Static Eliminator/Rod Type IZS40/41/42 The dual-AC system is adopted, and the potential amplitude is 25 V or less (at a mounting height of 300 mm). ・The feedback sensor enables high-speed static elimination. ・The self-balancing sensor reduces adjustment and maintenance man-hours. ・Easy to operate, ready to use when connected to the power supply (standard type). ・Remotely configurable ...
	Japan SMC_AW40-F04H-B Modular Filter Regulator 5μm filtration AW40-F04H-B Introduction: SMC AW40 Series G 1/2 Filter Regulator Kit AW40-F04H-B, 5μm filter size, 1/2 in threaded port, 10 bar, -5 → +60°C Japan SMC_AW40-F04H-B photo show Model features introduced Modular Filter Regulator ...
	Japan SMC_Y44-F02-A Cross Gasket Fits AC40-A series Y44-F02-A Introduction: SMC Cross Gasket Y44-F02-A, suitable for AC40-A series Japan SMC_Y44-F02-A Photo show Model features introduced SMC cross gaskets SMC's affordable, clean-looking AC series allows you to pick the modular one that best meets your needs ...