IDEC/Izumi HS5D Safety Switch HS5D-03ZRNM

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

VA circuit, key detachable in all positions, key 501,3m Cable Product Category Safety Interlocks Key removal location for all positions Degree of protection IP65 Cable length 3 meters The company has always been customer-centric, the concept of creating value for customers, and winning with quality and service.

4 Contacts, 2NC Door, 2NC Lock, Monitoring Circuit, Spring Lock, Rear Unlock Button Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO1411 ...

3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. Pressing ON ⇒ OFF is a direct open-circuit action function. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. （IEC60204-1； 9.2.5.8 ...

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

All M3.5 wiring screws are used to improve the connection line. The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit. There is also a key with a portable key as standard for hostage control ...

IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-DD44ZLSM-G 4 contacts 1NC+1NC and 1NC+1NC, spring lock, rear unlock button, side conduit 5000N locking force is the smallest in the industry Spring-loaded terminals prevent loose wires Energy saving 200mA solenoid consumption Raise...

Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance. Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation. Reduction of operating force in position 2 ...

3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance. Press OFF (position 3) ⇒ release OFF (position 1) to create an ON structure. (IEC60204-1:2005, 10.9, IEC60947-5-8:2007, 7.1.9), built-in 2 ...

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off. It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...

IDEC/Izumi HS6E Submersible Locking HS6E-P44B05-G Safety Switch Springlock World's Thinnest Solenoid Interlock Switch 15mm Wide Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions Energy saving - 24V DC/110 mA Manually unlockable on three sides ...

4 Contacts, 2NC Gate, 2NC Lock, Monitoring Circuit, Electromagnetic Lock Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO14119 GS-ET-19 ...

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

4 contacts, 3NC door, 1NC lock, monitoring circuit, spring lock, rear unlock button Compact body: 35x40x127mm 1400N locking strength Gold-plated contacts for small loads The head direction can be rotated 8 different actuator entries are allowed Applicable standard: EN ISO1411 ...

IDEC/Izumi HS6B Safety Switch HS9Z-A6230mm×15mm×78mm Miniature Safety Switch. 3 contacts of dual contact + auxiliary contact for applications with high safety requirements. （ISO13849-1, EN954-1） Depending on your needs, you can choose from 2 actuator inserts.

IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VG7Y4ZSM-G 4 contacts 2NC, 1NO and 1NC, solenoid lock, side wires 5000N locking force is the smallest in the industry Spring-loaded terminals prevent loose wires Energy saving 200mA solenoid consumption Electromagnetic locks and snap locks are available ...

3 position action of OFF ⇒ ON ⇒ OFF to avoid danger. By pressing OFF (position 3) ⇒ releasing OFF (position 1), there is no structure in the ON state. (IEC60204-1:2005, 10.9 terms, IEC60947-5-8:2007, 7.1.9 terms),

Low power consumption, built-in 6 contacts, and high level of 3000N locking strength. The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type. The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.

The non-contact safety switch with RFID technology improves the safety performance. Built-in safety features make the construction of a safety system independent of the combination with specific modules. Thanks to the RFID method, there is no error even if the door closes slowly. Even when installed on swing doors, sliding ...