Phoenix/Phoenix relay module PLC-RPT-110UC/21-21AU/RW - 2900351

PLC-INTERFACE for rail applications, including base terminals, with plug-in connection and plug-in miniature multi-layer gold-plated contact relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 2 PDTs, input voltage 110 V DC

Phoenix/Phoenix relay module PLC-RPT-110UC/21-21AU/RW - 2900351

advantage

Due to its wide range of electrical applications, optimal relay operation can be carried out

Vibration and shock resistance according to IEC 50155

Secure isolation between coil and contact in accordance with DIN EN 50178

Certified in accordance with EN 50155

Temperature range -40 °C ... + 70 °C (up to 85 °C for short periods)

Input voltage range 0.7-1.25 x UN (1.4 x UN for short term.)

Coil side

Rated input voltage UN 110 V DC

Input voltage range 77 V DC ... 137.5 V DC

Input voltage range with UN as reference 0.7 ... 1.25

Typical input current at UN is 4.5 mA

Typical response time is 5 ms

Typical release time is 11 ms

Coil voltage 60 V DC

Protection circuits: bridge rectifiers; Bridge rectifiers

spare diodes; Freewheeling diodes

Surge protection

RCZ filter

Various electronic components

The operating voltage is displayed with a yellow LED

handoff

Contact Type: 2 changeover contacts

Switch contact type Single contact

Drive and function monostability

Drive (Polarity) Bipolar

Contact material AgNi, hard gold plating

The maximum switching voltage is 30 V AC

36 V DC

Minimum switching voltage 100 mV (10 mA)

Limit continuous current to 50 mA

The maximum starting current is 50 mA

Minimum switching current 1 mA (24 V)

Maximum power rating (resistive load) 1.2 W (24 V DC)

Switching: When the gold plating is broken

Precautions If the plating is damaged, the following values can be applied

Maximum switching voltage 250 V AC/DC (When the voltage between the same terminal blocks of two adjacent modules is greater than 250 V (L1, L2, L3), the bulkhead PLC-ATP must be used.) ）

The minimum switching voltage is 12 V AC/DC

Limit continuous current to 2x 6 A (see temperature load curve)

Maximum start-up current 15 A (300 ms)

The minimum switching current is 10 mA

Maximum power rating (resistive load) 140 W (24 V DC)

100 W (for 48 V DC)

60 W (can be used for 60 V DC)

44 W (for 110 V DC)

60 W (for 220 V DC)

1500 VA (can be used for 250VAC)

Switching capacity 2 A (at 24 V, 13 DCs)

0.2 A (at 110 V, 13 DCs)

0.2 A at 250 V, 13 DCs

2 A (at 24 V, AC15)

2 A (at 120 V, AC15)

2 A (at 250 V, AC15)

Mounting Type: DIN rail mounting

Assembly Instructions Arrangement without spacing

Installation Position Any

All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.

The above is the Germany brand Phoenix/Phoenix relay module PLC-RPT-110UC/21-21AU/RW - 2900351 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.

Phoenix/Phoenix relay module PLC-RPT-110UC/21-21AU/RW - 2900351

Sections viewed

Contact

working hours