PLC-INTERFACE, including relay base and pluggable power contact relay (with manual operation and integrated status LED), screw connection, 2 changeover contacts, input voltage: 120 V AC / 110 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
Environmental conditions
Ambient temperature (operating) -20 °C ... 55 °C
Ambient temperature (storage / transport) -20 °C ... 85 °C
Maximum height ≤ 2000 m
Protection class RT II (relay)
IP20 (Relay Base)
≥ IP54 (mounting position)
Coil side
Rated input voltage UN 120 V AC
110 V DC
Typical input current at UN is 5 mA
Typical response time 6 ms (110 V DC)
3 ms … 15 ms (120 V AC)
Typical release time 10 ms (110 V DC)
Typical release time range 3 ms ... 15 ms (120 V AC)
Protection circuit Bridge rectifier Bridge rectifier
The operating voltage is displayed with a yellow LED
Contact side
Contact Type: 2 changeover contacts
Switch contact type Single contact
Contact material AgNi
Maximum switching voltage 250 V AC/DC (When the voltage between the same terminal blocks of two adjacent modules is greater than 250 V (L1, L2, L3), a bulkhead PLC-ATP must be used. FBST 8-PLC… Or... FBST 500… for equipotential bridging)
Minimum switching voltage 12 V (10 mA)
Minimum switching current 10 mA (12V)
Maximum start-up current 12 A (20 ms)
Limit continuous current to 6 A
Maximum power rating (resistive load) 192 W (24 V DC)
62 W (48 V DC)
42 W (60 V DC)
55 W (110 V DC)
66 W (220 V DC)
2000 VA (250 V AC)
Switching capacity 1 A (24 V, DC13)
1.5 A (230 V, AC15)
overview
Test voltage 4 kVrms (50 Hz, 1 minute, coil/contact)
2.5 kVrms (50 Hz, 1 minute, CO contact/CO contact)
Mode of operation 100% working factor
Flammability rating according to UL 94 V0 (enclosure)
Mechanical life 5x106 switching cycles
Installation Position Any
Assembly Instructions Arrangement without spacing
Connect your data
Connection Name Coil Side
Connection: Screw connection
Stripping length 8 mm
Thread M3
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1.5 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Connect to data2
Connection Name Contact Side
Connection: Screw connection
Stripping length 8 mm
Thread M3
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1.5 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Standards and Specifications
Name Standards/Regulations
Standard/Procedure EN 50178
Rated insulation voltage 250 V AC
Rated overvoltage 6 kV
Insulation: Safety isolation, reinforced insulation
Pollution class 2
Overvoltage category III
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the relay module with manual operation locking function of Germany brand Phoenix - PLC-RSC-120UC/21-21/MS - 2910505 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix relay module PLC-RSC-24DC/21HC/EX - 2909519
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with screw connection and plug-in relay with 10 A power contact, 1 changeover contact, 24 V DC input voltage. It is certified according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2.
...
|
|
Phoenix/Phoenix relay module PLC-RSC-230AC/21-21/SO46/HI - 1079387
The PLC-INTERFACE consists of PLC-BSC.../21-21/SO46/HI base terminals with screw connection and Push-in miniature relay with power contacts, 2 changeover contacts, rated input voltage 230 V AC, defined activation and deactivation thresholds
Maximum work under rated conditions ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/21AU - 2900306
PLC-INTERFACE, incl. PLC-BPT.../21 base terminal with plug-in connection with plug-in miniature multi-layer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 1 PDT, input voltage 24 V DC
advantage
Low-profile design
Implemented via V8 adapter with ...
|
|
Relay module with manually operated locking - PLC-RSC- 24DC/21AU/MS - 2909655
PLC-INTERFACE, INCL. PLC-BSC.../21 BASE TERMINAL, SCREW CONNECTION, PLUG-IN MINIATURE RELAY WITH MULTI-LAYER GOLD-PLATED CONTACTS AND MANUAL OPERATION, 1 CO CONTACT, 24 V DC INPUT VOLTAGE
size
Width 6.2 mm
Height 80 mm
Depth 94 ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/2X21/FG - 2910537
PLC-INTERFACE, incl. relay base and plug-in safety relay with positively guided contacts in accordance with DIN EN 61810-3, Push-in connection, 2 changeover contacts, forced actuation, freewheeling diode, input voltage: 24 V DC
Test voltage coils/contacts ...
|
|
RIF-1-RSC-LDP-24DC/1X21 relay module from Phoenix - 2903358
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 1 changeover contact. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 24AC/21-21/MS - 2987956
Pluggable miniature relay with power contacts, 2 PDTs, test keys, mechanical switch position display, status LED, input voltage 24 V AC
advantage
The strap can detect manual operation
Switching current up to 16 A
DC model with freewheeling diode
Integrated status LEDs
Mechanical switches ...
|
|
Phoenix/Phoenix relay module with manually operated locking - PLC-RPT- 48DC/21-21/MS - 2910521
PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation, integrated status LEDs and freewheeling diode, Push-in connection, 2 changeover contacts, input voltage: 48 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm ...
|
|
Phoenix/Phoenix relay module - RIF-4-RPT-LDP-24DC/3X21 2903278
Pre-assembled relay modules with plug-in connections, including: relay base, high-power contact relay and bracket. Contact type: 3 PDT. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input voltage range 20.4 V DC ... 26.4 V DC ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR2/100AC/2X21 - 2907052
Plug-in industrial relay with power contacts, 2 changeover contacts, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 100 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24UC/2X21/FG-2910539
PLC-INTERFACE, including relay base and plug-in safety relay, with positively guided contacts according to DIN EN 61810-3, Push-in connection, 2 changeover contacts, forced actuation, bridge rectifier, input voltage: 24 V AC/DC
Maximum ...
|
|
Phoenix/Phoenix relay module PLC-RPT- 24DC/ 1IC/ACT - 2900298
The PLC-INTERFACE is suitable for high inrush currents and consists of PLC-BPT.../1 IC/ACT base terminal with plug-in connection with plug-in miniature relay for mounting on DIN rail NS 35/7.5 with an inrush current of up to 130 A, 1 NO contact, input voltage 24 V DC
...
|
|
Phoenix/Phoenix relay modules RIF-RPT-LDP-24DC/1X2/3X1/AU/FG - 1148703
Relay modules with plug-in connection, including: relay base and status LEDs, freewheeling diodes and clamps, safety relay with mechanically interlocking contacts (acc. to DIN EN 61810-3), contact type: 3 NO contacts and 1 NC, input voltage: 24 V DC ...
|
|
PLC-RPT-120UC/21HC -2900296 relay module from Phoenix
The PLC-INTERFACE is suitable for high continuous currents and includes PLC-BPT.../21 HC base terminals with plug-in connection with plug-in miniature relays for mounting on the DIN rail NS 35/7.5 with a limit continuous current of up to 10 A, 1 PDT, input voltage 120 V AC/DC
Excellent...
|
|
REL-MR-110DC/21HC - 2961338
Plug-in miniature power relay with power contacts for high continuous current, 1 PDT, input voltage 110 V DC
Advantage: Switching current up to 16 A
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 3x 107 switching cycles
Break off...
|
|
Phoenix/Phoenix relay module PLC-RPT-12DC/21/EX - 2909527
PLC-INTERFACE, consisting of DIN rail mounting, 6.2 mm base terminal with plug-in interface and plug-in miniature relay with 6 A power contact, 1 changeover contact, 12 V DC input voltage. Certified according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2
|
|
Phoenix/Phoenix relay modules EMG 10-REL/KSR-G 24/ 1-LCU 2942807
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large loads, 1 normally open contact, input voltage 24 V DC, rotation 180°
Advantages: Integrated input module and interference suppression module
Maximum power consumption of 0.5 W under rated conditions
Test voltage ...
|
|
REL-MR- 24AC/21-21 - 2961435 single relay
Plug-in miniature power relay with power contacts, 2 PDTs, input voltage 24 V AC
advantage
RT III certified (wash-resistant)
Switching current up to 8 A
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 1x 107 cycles
Insulation ...
|
|
Phoenix/Phoenix Single Relay REL-IR-BL/L-110DC/4X21 - 1109560
Plug-in industrial relay, basic design, with power contacts, 4 changeover contacts, test button, status LED, mechanical switch position indicator, polarity A1+, A2-, input voltage: 110 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life ...
|
|
Phoenix/Phoenix Single relay with manually operated locking function - REL-OR3/LDP-110DC/3X21 - 2908898
Pluggable octal relay with power contacts, 3 PDTs, test button, freewheeling diode, mechanical switch position display, polarity: A1+, A2-, input voltage: 110 V DC
size
Width 35 mm
Height 35 mm
Depth 54.4 mm
Environmental conditions
Ambient temperature ...
|
|