Introduction: Three-phase 200V series input specifications are available. Solving the issue of balancing the semiconductor and FPD industries. Three LEDs are used to quickly identify anomalous areas. 150% peak current enables high-power load start-up
peculiarity
There is no need for cumbersome design for single-phase power supply, and the risk of "three-phase balance" imbalance is eliminated with a three-phase 200V power supply
It is also equipped with a large number of functions to make the design more efficient, and the compact body makes it easier to change the design
Compact size of the smaller*1 class
The peak current is up to 150% of the rated current, and it can cope with instantaneous current increases such as motor loads
parameter
power | 240W | 480W | 960W | project | Output voltage | 24V | 24V | 24V | Efficiency*1 | Three-phase AC200V
When entering | 93% typical | 94% typical | 95% typical | Single-phase AC200V
When entering | 92% typical | 93% typical | 94% typical | Three-phase AC230V
When entering | 93% typical | 94% typical | 95% typical | Single-phase AC230V
When entering | 93% typical | 94% typical | 95% typical | lose
enter
strip
item | Input voltage tolerance range *2 | Three-phase/single-phase AC170~264V, AC265~300V (1 second)
DC240~350V | Frequency *2 | 50/60Hz(47~63Hz) | Input current
*1 | Three-phase AC200V
When entering | 0.80A typical | 1.6A typical | 3.1A typical | Single-phase AC200V
When entering | 1.4A typical | 2.6A typical | 5.2A typical | Three-phase AC230V
When entering | 0.70A typical | 1.4A typical | 2.7A typical | Single-phase AC230V
When entering | 1.2A typical | 2.3A typical | 4.5A typical | Factor | 0.9 or more | Leakage current
*3 | Three-phase AC200V
When entering | 1mA or less | Three-phase AC230V
When entering | 1mA or less | Inrush current
*4
(25℃、
Cold start) | Three-phase AC200V
When entering | 13A typical | 13A typical | 14A typical | Three-phase AC230V
When entering | 15A typical | 15A typical | 16A typical | lose
go out
special
sex | Rated output current | 10A | 20A | 40A | Peak current | 15A | 30A | 60A | Voltage adjustable range *5 | 24~29.5V(V.ADJ) | 24~28V (at V.ADJ) | Ripple noise
Voltage *6 | triphasic
AC200V~240V
When entering | 50mVp-p or less
At 20 MHz | 120mVp-p or less
At 20 MHz | 60mVp-p or less
At 20 MHz | Static input change *7 | 0.5% or less | Stationary load fluctuation *8 | 1.5% or less | Temperature changes | triphasic
AC200V~240V
When entering | 0.05%/°C or less | Start-up time
*9 | Three-phase AC200V
When entering | 1,000ms or less | Three-phase AC230V
When entering | 1,000ms or less | Output hold
Time *9 | Three-phase AC200V
When entering | 35ms typical | 30ms typical | 25ms typical | Three-phase AC230V
When entering | 35ms typical | 30ms typical | 25ms typical | attach
bring
merit
Yes | Overcurrent protection | Yes, automatic reset, intermittent action type
Please refer to "● Overcurrent Protection" for the sample. | Overvoltage protection | Yes, more than 130% of the rated output voltage, open circuit (power-off reset)
Please refer to "● Overvoltage Protection" for the sample. | Run in series | Yes (up to 2 units, external diodes required) | Run in parallel | Yes (up to 2 units) Please refer to "●About Parallel Operation" in the sample. | INPUT OK LED | Yes (LED, color: green) | DC OK indicator | Yes (LED, color: green) | Iout> 100% indicator | Yes (LED, color: yellow) | DC OK signal output | Yes (MOS FET relay output: 30V or less, 50mA or less) | Iout > 100% signal output | Yes (MOS FET relay output: 30V or less, 50mA or less) | break off
margin
endure
press | Withstand voltage | AC3.0kV 1min (all input terminals) and (all output terminals, signal output terminals).
The cut-off current is 20mA | AC2.0kV 1min (all input terminals) and ( ).
The cut-off current is 20mA | AC1.0kV 1min (output terminals, all signal output terminals) and ( ).
The cut-off current is 25mA | AC0.5kV between 1min (all output terminals) and (all signal output terminals).
The cut-off current is 10mA | Insulation resistance | 100MΩ or more, DC500V (output terminals, all signal output terminals) and
(All input terminals, ). |
special
border | Operating ambient temperature*10 | -40~+70°C (rated attenuation due to temperature) (no condensation, no icing) | Storage temperature | -40~+85°C (no icing, no condensation) | Use ambient humidity | 95%RH or less (storage humidity 95%RH or less) | Vibration resistant | 10~55Hz, maximum 5G single amplitude 0.42mm, 2h in 3 directions | Impact-resistant | 294m/s2 3 times in each of 6 directions | can
depend on
sex | MTBF *11 | More than 135,000 hours | More than 60,000 hours | Lifespan *12 | More than 10 years | knot
frame | weight | 800g or less | 1,050g or less | 1,750g or less | Cooling fan | not | Protective structure | IP20, EN/IEC 60529 compliant | symbol
combine
sign
permit | Higher-order harmonic suppression | Complies with EN 61000-3-2 (single phase) *13
JIS C 61000-3-2 compliant (three-phase/single-phase) | EMI | Noise terminals
voltage | According to EN 61204-3 Class B,
EN 55011 ClassB (3 phase)
According to EN 61204-3 Class A,
EN 55011 ClassA (Single Phase) | EN 61204-3 Class B、
Complies with EN 55011 Class B
(Three-phase)
EN 61204-3 Class B、
Complies with EN 55011 Class B
(Single-phase*14)
EN 61204-3 Class A、
Complies with EN 55011 Class A
(Single-phase) | Radiated interference
Electric field strength | EMS | EN 61204-3 high severity levels | Safety standards | UL 508, UL121201(Listing)
CSA C22.2 No.107.1, CSA C22.2 No.213(cUL)
UL 62368-1(Recognition) OVCⅡ(≤3000m) Pol2
CSA C22.2 No.62368-1(cUR) OVCⅡ(≤3000m) Pol2
EN 62477-1 OVCⅢ(≤2000m) OVCⅡ(2000m < and ≤3000m) Pol2
EN 50178 OVCⅢ(≤2000m) OVCⅡ(2000m < and ≤3000m) Pol2
EN 62368-1 OVCⅡ(≤3000m) Pol2
EAC(TR CU 004 / 2011, TR CU 020 / 2011)
RCM (EN61000-6-4)
Complies with PELV (EN/IEC 60204-1)
Complies with EN/IEC 61558-2-16 | SEMI standard | Compliant with SEMI F47-0706 (at 3-phase/single-phase AC200~240V input) | This article introduces the Omron S8VK-WA switching power supply power factor: 0.9 or more products, if you are interested in Omron/Omron switching power supply, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
We will provide customers with high-quality products and satisfactory services with honest and trustworthy, convenient and fast business methods and strict management.
|
More on that
|
OMRON Travel Switch WLCA12-2N-N BY OMR 2NO+2NC
Product Introduction
A variety of head shapes are available in combination with the environment and application
· Various head shapes such as rotary pendulum type, plunger type, tentacle type, fork locking pendulum type
· Select the most suitable shape from a variety of drive rods according to the shape and operation of the workpiece
· ...
|
|
OMRON SS-5GL2 BY OMI Position Switch
Introduction: OMRON SS-5GL2 BY OMI SS series subminiature basic switch, contact type: 1NO+1NC
It is Omron's best-selling micro switch with a wide range of specifications and a wide range of 0.1A~10.1A types.
The operating force specifications meet the requirements of low load operation to high negative ...
|
|
Omron D4N Safety Limit Switch Insulation resistance: 100MΩ or more
Introduction: Omron D4N Safety Limit Switch Insulation resistance: 100MΩ or more, rated frequency: 50/60Hz, in line with EN115-1, EN81-20 and EN81-50 safety contact requirements (slow action type only).
peculiarity
The product contains a variety of products with 1NC/1NO, 2NC, 2NC/...
|
|
Omron Safety Limit Switch D4B-□N Ambient humidity: 95% or less
peculiarity
A new force-open action device (NC contact only) has been added to disconnect the contact in the event of a fault such as a contact blowing.
The safety of the pendulum setting ensures that a gear meshing device is adopted between the action position indicator panel and the pendulum.
Equipped with the ability to ...
|
|
OMRON switches WLCA12-N BY OMR IP67 rated
Product Introduction
Use a combination of environment and purpose
A variety of head shapes are available
· Various head shapes such as rotary pendulum type, plunger type, tentacle type, fork locking pendulum type
· Select the most suitable shape from a variety of drive rods according to the shape and operation of the workpiece
...
|
|
Omron D4NL solenoid locking safety gate switch 4kV between different terminals
Introduction: Omron D4NL electromagnetic locking safety gate switch is a multi-contact miniature electromagnetic locking safety door switch with a wide range of varieties, which can choose the insertion direction of the operating key and adjustable installation to ensure the flexibility of installation.
peculiarity
Selectable operation key insertion direction and ...
|
|
Omron D4BL electromagnetic locking safety gate switch mass: about 800g
Introduction: Omron D4BL electromagnetic locking safety door switch aluminum casting body, locking strength 700N; Available in the type of eye-catching indicator for monitoring and the type of adjustable operating key for revolving doors, the installation direction of the switch head can be changed, and the operating key can be inserted from four directions.
|
|
OMRON Proximity Switch EE-SX670 Response frequency: 1kHz
Features:
Operation mode ON when shading and ON when light is in (switchable type)
High-speed response with a response frequency of 1kHz
The light entry indicator is clear for easy operation confirmation
The power supply voltage is DC5 - 24V wide range
Equipped with a light inlet when shading ...
|
|
Omron DZ Special Use Standard Switches Leakage Capability (PTI): 175
Introduction: Omron DZ Special Use Standard Switch Leakage Performance (PTI): 175, Contact Resistance: 15mΩ or less (initial value), interchangeable with Omron Z Standard Switch, because the mounting hole size, mounting spacing and plunger position of the two switches are the same.
peculiarity
...
|
|
Omron 1ZAP2/1VAP2 Door Switch PTI (Leakage Performance) 175
Introduction: Door switch with built-in standard type switch, long service life, PTI (leakage performance) 175, ambient temperature -25~ 80 ° (no icing, condensation).
peculiarity
Installed in electrical facilities, equipment and other door opening and closing parts, can reliably prevent accidents...
|
|
Omron D4NA safety limit open heteroterminal room: 4kV
Introduction: Omron D4NA is an economical safety limit switch, off insulation resistance: more than 100MΩ, contact spacing: 2 × 0.5mm or more, standardized gold-plated contacts to ensure high reliability of contact.
peculiarity
Standardized gold-plated contacts guarantee a high contact ...
|
|
Omron Special Standard Switch DZ Mass approx. 30~50g
Introduction: DPDT standard switch for control of two independent circuits
peculiarity
It is well suited for switching circuit operation at different voltages and for controlling two independent circuits.
It is interchangeable with the Omron Z standard type switch because of the mounting hole size of the two switches, the mounting ...
|
|
Omron S8VK-E Switching Power Supply (120W Type) Mass: 620g
Introduction:Omron S8VK-E Switching Power Supply (120W Type) Weight: 620g, Rated Power: 120W, Suitable for Charging Pile Industry Switching Power Supply CCC Safety Certification, Environmental Resistance, Three-proof Coating Correspondence, Minus 40 Degrees Can Be Started,
peculiarity
Operating temperature range -25 ...
|
|
Omron D41G High Code Guard Lock Safety Door Switch Latching force: 30N
Introduction: Omron D41G High Coding Guard Lock Safety Door Switch Latching Force: 30N, Rated Insulation Voltage (Ui) DC32V, Rated Short-Circuit Current: 100A, D41 Series helps you create safety precautions that meet ISO14119 standards.
peculiarity
No tampering ...
|
|
Omron D4NE Safety Limit Switch Rated frequency: 50/60Hz
Introduction: Omron D4NE is a safety limit switch in accordance with the global standard EN 50047, rated frequency: 50/60Hz, weight: about 47g (when D4NE-4G31), ambient temperature: -30~+70°C (no icing).
peculiarity
The contact composition is complete, and there is a single contact ...
|
|
Omron A2W Wireless Pushbutton Switch Frequency Channel: 1 channel
Introduction: The wireless switch using the sub-GHz frequency band has both wireless reliability and ease of use on the basis of meeting the use environment, and the communication speed of the wireless service area is 100 kbit/s.
peculiarity
Confirm successful receipt via LED.
Self-generating electricity by thrust, ...
|
|
Omron/Omron S8FS-G switching power supply Static load fluctuation: 1.0% or less
Introduction:Omron/Omron S8FS-G switching power supply static load fluctuation: 1.0% or less, frequency: 50/60Hz (47~450Hz), excellent performance and high reliability coexist, in line with various standards, wide applicability.
peculiarity
Superior reliability and wide availability
...
|
|
The Omron D4SL-N safety gate switch is rated at 50/60Hz
Introduction: Omron D4SL-N miniature electromagnetic locking safety door switch makes the safety door more reliable. It is both compact and convenient, making it possible to make a wide range of devices safer.
peculiarity
It is both compact and convenient, making it possible to make a wide range of devices safer
Significant reduction in installation man-hours, wiring man-hours, etc.
|
|
Omron TP70 Tentacle Switch Protection Rating *1: IP65
Introduction: Omron TP70 Tentacle Switch Protection Rating *1: IP65, Allowable Operating Speed: 1 mm/s ~ 0.5 m/s, models with emergency stop switch are available to suit the application.
peculiarity
The combination of plastic tentacle drive levers makes it easy to handle the switch.
...
|
|
Omron General Basic Switch X Leakage Performance (PTI) 175
Introduction: DC switch with built-in magnetic arc extinguishing, leakage performance (PTI) 175, insulation resistance min. 100MΩ (at 500V DC).
peculiarity
A small permanent magnet that deflects the arc is placed in the contact mechanism to effectively eliminate it.
The shape and installation steps are similar to the ...
|
|