Introduction: Omron D4BL electromagnetic locking safety door switch aluminum casting body, locking strength 700N; Available in the type of eye-catching indicator for monitoring and the type of adjustable operating key for turnstiles, the opening head can be installed in a different direction and the operating key can be inserted from four directions.
peculiarity
The secondary release key ensures easy maintenance and unlocks the door in the event of a power outage.
The aluminum casting body is equipped with a switch box that complies with IP67, UL, CSA TYPE6P, and 13 protection structures.
Equipped with horizontal and vertical catheter openings.
An eye-catching indicator type for monitoring and an adjustable operation key type for revolving doors are available.
The installation direction of the switch head can be changed, and the operating key can be inserted from four directions.
parameter
Interlocking Type 2 | (EN ISO 14119) | Code level | Low level coded (EN ISO 14119) | Protective structure*1 | IP67(EN60947-5-1) | Lifespan*2 | machine | More than 1,000,000 times | electric | More than 500,000 cycles (AC250V 10A, resistive load) | Speed of operation | 0.05～0.5m/s | Frequency of operation | Up to 30 times/min | Forced disconnection force*3 | Min. 19.61N (EN60947-5-1) | Forced disconnection of the pre-stroke*3 | Min. 20mm (EN60947-5-1) | Locking strength | 700N or more (GS-ET-19) | Contact resistance | 50mΩ or less | Rated insulation voltage (Ui) | 300V(EN60947-5-1) | Rated frequency | 50/60 Hz | Degree of protection against electric shock | Class I (with ground terminal) | Pollution (use environment) | 3 (EN60947-5-1) | Pulse withstand voltage
(Uimp)
(EN60947-5-1) | Between the same extremors | 4 kV | Alien poles | between each terminal and the ground | between the solenoid and the floor | 2.5 kV | Insulation resistance | 100MΩ or more (DC500V) | Contact spacing | 2 × 2mm or more | Vibration resistant | Malfunction | 10~55Hz, single amplitude 0.35mm | Impact-resistant | durable | More than 1000m/s2 | Malfunction | 300m/s2 or more | Conditional short-circuit current | 100 A (EN60947-5-1) | Rated Sealed Thermal Current (ITHE) | 10 A (EN60947-5-1) | Use ambient temperature | -10 to 55°C (no icing) | Use ambient humidity | Below 95%. | quality | Approximately 800 g |
This article Omron/Omron D4BL electromagnetic locking safety gate switch quality: about 800g products, if you are interested in Omron/Omron switches, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
We will provide customers with high-quality products and satisfactory services with honest and trustworthy, convenient and fast business methods and strict management.
|
More on that
|
Omron D41L High Code Electromagnetic Locking Safety Gate Switch Frequency band 125kHz
Introduction: The Omron D41L High Code Electromagnetic Locking Safety Door Switch is a safety gate switch for sanitary equipment, the hinged door can be installed on the left or right side, and the latching force can be easily adjusted.
peculiarity
Hinged doors can be installed on either the left or right side
Trigger...
|
|
Omron WL-N / WLG 2-loop limit switch IP67 degree of protection
Introduction: It can be selected according to the use environment and use, 2-loop limit switch, protection grade IP67, and the ambient temperature is -10~+80°C (no icing).
parameter
We will be honest and trustworthy, convenient and fast business mode and strict management, to provide customers with high-quality products.
|
|
Omron D4N Safety Limit Switch Insulation resistance: 100MΩ or more
Introduction: Omron D4N Safety Limit Switch Insulation resistance: 100MΩ or more, rated frequency: 50/60Hz, in line with EN115-1, EN81-20 and EN81-50 safety contact requirements (slow action type only).
peculiarity
The product contains a variety of products with 1NC/1NO, 2NC, 2NC/...
|
|
Omron NL Limit Contact Switch Degree of protection: IP60
Introduction: Omron NL limit contact switch IP60 degree of protection, leakage performance: (PTI) 175, built-in LED indicator to ensure easy operation and monitoring, DC type and S3D2 sensor controller combination to provide a variety of functions.
peculiarity
Instantaneous operation on contact, hysteresis pole ...
|
|
Omron D4NA safety limit open heteroterminal room: 4kV
Introduction: Omron D4NA is an economical safety limit switch, off insulation resistance: more than 100MΩ, contact spacing: 2 × 0.5mm or more, standardized gold-plated contacts to ensure high reliability of contact.
peculiarity
Standardized gold-plated contacts guarantee a high contact ...
|
|
Omron D4F Miniature Safety Limit Switch Rated Frequency: 50/60Hz
Introduction: Omron D4F small safety limit switch rated frequency: 50/60Hz, operating speed: mm/s~0.5m/s, ultra-small limit switch (4 contacts) with forced disconnect structure, protection grade: IP67.
peculiarity
Ultra-miniature limited ...
|
|
Omron A165E E/E Emergency Stop Switch PTI (Tracking Characteristics): 175
Introduction: Omron/Omron A165E Emergency Stop Switch PTI (Tracking Characteristics): 175, Ambient humidity: 35%~85%, in accordance with EN 60947-5-5 standard, equipped with a safety lock to prevent abuse.
peculiarity
The forced disconnect structure can be used to force the ...
|
|
Omron S8VK-E Switching Power Supply (120W Type) Mass: 620g
Introduction:Omron S8VK-E Switching Power Supply (120W Type) Weight: 620g, Rated Power: 120W, Suitable for Charging Pile Industry Switching Power Supply CCC Safety Certification, Environmental Resistance, Three-proof Coating Correspondence, Minus 40 Degrees Can Be Started,
peculiarity
Operating temperature range -25 ...
|
|
Omron S8VK-WA switching power supply Power factor: 0.9 or more
Introduction: Three-phase 200V series input specifications are available. Solving the issue of balancing the semiconductor and FPD industries. Three LEDs are used to quickly identify anomalous areas. 150% peak current enables high-power load start-up
peculiarity
There is no need for cumbersome design for single-phase power supply, with ...
|
|
Omron dip switch A7D/A7DP has a continuous current carrying capacity of 100 mA
Introduction: Omron DIP Switch A7D/A7DP is an ultra-small, low-cost, push-to-operate switch with contact resistance: 200mΩ max, shock resistance of more than 500m/s2.
peculiarity
The all-in-one design means fewer parts are needed. This product is characterized by a low ...
|
|
Omron Switching Power Supply S8VK-X has no cooling fan
peculiarity
With communication function, size**small*1
Excellent environmental resistance contributes to the stable operation of the plant
Support a wide range of communication methods in various fields
The status is displayed on the body monitor, which is more convenient to use in various scenarios
The fuselage monitor adopts a clear ...
|
|
OMRON Safety Door Switch Operation Key D4DS-K2 2NC/1NO
Product Introduction
A new generation of multi-contact safety door switch saves labor and is beneficial to environmental protection.
Features:
In addition to the original 1NC/1NO and 2NC contact structures, the product series has added 3-contact type and MBB M12 connectors equipped with 2NC/1NO and 3NC contact structures.
|
|
OMRON Switching Power Supply S8VK-C24024 Power: 240W
Features:
Cost-saving, single-phase power supply
Common input and for global applications
Safety standards
Small, space-saving design
· Universal input for global applications:
AC100-240V(AC85-264V
Can use DC input: DC90-...
|
|
Omron S8FS-C Switching Power Supply Weight: 150g or less
Introduction: Omron S8FS-C Switching Power Supply Weight: 150g or less, voltage adjustable range *: -10~+10% (V.ADJ), wide current range input: AC100-120V, AC200-240V series, DIN rail installation can also be easily achieved with separately sold accessories.
peculiarity
...
|
|
Omron A7PS/A7PH DIP Switches The maximum contact resistance is 300mΩ
Introduction: Omron/Omron A7PS/A7PH dip switch is a dust-proof, easy-to-use, setting switch with large display characters, vibration resistance: 10~55Hz, 1.5mm double amplitude, more than 2 hours.
peculiarity
The simple press mechanism and the large easy-to-view digital display make for ...
|
|
Omron D4N-□R Manual Reset Safety Limit Switch Mass: about 92g
Introduction: Omron D4N-□R manual reset safety limit switch Mass: about 92g, contact resistance: 25mΩ or less, insulation resistance: 100MΩ or more, contact spacing: 2 × 2mm or more.
peculiarity
On the basis of the original contact forms 1NC/1NO and 2NC, the ...
|
|
Omron High Temperature Standard Switches TZ Contact Resistance 100 mΩ or Less (Initial Value)
Introduction: Stable operation at ambient temperature of 400°C, contact resistance of 100 mΩ or less (initial value), use ambient temperature of -65°C~400°C (no icing).
peculiarity
Ceramic insulators, cobalt alloy springs and special alloy contacts are included to ensure high ambient temperatures ...
|
|
Omron Safety Limit Switch D4N Insulation Resistance: 100MΩ or more
Features:
Models with 1NC/1NO, 2NC, 2NC/1NO and 3NC contact styles are available. (MBB contact slow-acting type is also available.) ）
In addition, the M12 connection type is available, which is more labor-saving and easier to replace.
Can be used for standard loads and tiny ...
|
|
The Omron D4SL-N safety gate switch is rated at 50/60Hz
Introduction: Omron D4SL-N miniature electromagnetic locking safety door switch makes the safety door more reliable. It is both compact and convenient, making it possible to make a wide range of devices safer.
peculiarity
It is both compact and convenient, making it possible to make a wide range of devices safer
Significant reduction in installation man-hours, wiring man-hours, etc.
|
|
Omron D4NE Safety Limit Switch Rated frequency: 50/60Hz
Introduction: Omron D4NE is a safety limit switch in accordance with the global standard EN 50047, rated frequency: 50/60Hz, weight: about 47g (when D4NE-4G31), ambient temperature: -30~+70°C (no icing).
peculiarity
The contact composition is complete, and there is a single contact ...
|
|
Contact
working hours
