The PLC-INTERFACE, consisting of PLC-BPT.../21 base terminals with Push-in technology and pluggable miniature relays with power contacts, can be mounted on the DIN rail NS 35/7.5, 1 PDT, input voltage 230 V AC/220 V DC
advantage
Low-profile design
Efficient system connectivity via V8 adapter
RT III Hermetically Sealed Relay
Secure isolation between coil and contact in accordance with DIN EN 50178
Functional plug-in bridges
Integrated input module and interference suppression module
Coil side
Rated input voltage UN 230 V AC
220 V DC
Input voltage range 179.4 V AC ... 264.5 V AC （20 °C）
171.6 V DC … 253 V DC （20 °C）
Typical input current at UN 3.2 mA (at UN = 230V AC)
3 mA (at UN = 220 V DC)
Typical response time is 7 ms
Typical release time is 15 ms
Protection circuits: bridge rectifiers; Bridge rectifiers
The operating voltage is displayed with a yellow LED
handoff
Contact Type: 1 changeover contact
Switch contact type Single contact
Drive and function monostability
Drive (Polarity) Bipolar
Contact material AgSnO
Maximum switching voltage 250 V AC/DC (When the voltage between the same terminal blocks of two adjacent modules is greater than 250 V (L1, L2, L3), a bulkhead PLC-ATP must be used. FBST 8-PLC… Or... FBST 500… for equipotential bridging)
Minimum switching voltage 5 V (100 mA)
Limit continuous current to 6 A
Max. start-up current 10 A (4 s)
Minimum switching current 10 mA (12V)
Maximum power rating (resistive load) 140 W (24 V DC)
20 W (for 48 V DC)
18 W (can be used for 60 V DC)
23 W (for 110 V DC)
40 W (can be used for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
0.2 A (at 110 V, 13 DCs)
0.1 A (at 220 V, 13 DCs)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 230 V, AC15)
Connection: Push-in connection
Stripping length 10 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Mounting Type: DIN rail mounting
Assembly Instructions Arrangement without spacing
Installation Position Any
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix relay module PLC-RPT-230UC/21 - 2900305 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Relay module with manually operated locking - PLC-RSC- 24UC/21AU/MS - 2909656
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, plug-in miniature relay with multi-layer gold-plated contacts and manual operation, 1 changeover contact, 24 V AC/DC input voltage
size
Width 6.2 mm
Height 80 mm
Depth...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/200AC/4X21 - 2907056
Plug-in industrial relay with power contacts, 4 changeover contacts, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 200 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) ...
|
|
Phoenix/Phoenix Time Relays Timing Relays - TR-ES-OFF-CC-24/240-10H - 2907320
Phoenix/Phoenix Time Relays Timing relay - TR-ES-OFF-CC-24/240-10H - 2907320 timer relay with delay release and an adjustable time range (50 ms - 10 h), supply voltage 24-48VDC/24-240VAC, 1 PDT
size
Wide...
|
|
Phoenix/Phoenix Single Relay REL-MR-230AC/21-21AU - 2961480
Plug-in miniature power relay with multi-layer gold-plated contacts, 2 PDTs, input voltage 230 V AC
Benefits: RT III certified (wash-resistant)
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 1x 107 cycles
Insulation characteristics
Overvoltage Category I ...
|
|
REL-MR- 60DC/21HC - 2961325 single relay from Phoenix
Plug-in miniature power relay with power contacts for high continuous current, 1 PDT, 60 V DC
advantage
Switching current up to 16 A
Coil side
Rated input voltage UN 60 V DC
Input voltage range 39 V DC ... 144 V DC
Typical input under UN ...
|
|
Phoenix/Phoenix relay module PLC-RSC-120UC/21/EX - 2909525
PLC-INTERFACE, consisting of DIN-rail mountable, 6.2 mm base terminal with screw connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 120 V AC/110 V DC input voltage. It has been approved according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 requirements.
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/L-230AC/4X21 - 2903688
Plug-in industrial relay with power contact, 4 PDT, test key, status LED, mechanical switch position display, input voltage: 230 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/LDP- 12DC/4X21AU - 2903669
Pluggable industrial relay with power contacts and additional hard gold plating, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2-, coil voltage: 12 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
...
|
|
Phoenix/Phoenix relay module RIF-0-RPT-12DC/ 1AU - 2903360
Pre-assembled relay modules with plug-in connections, including: relay base (with ejector) and multi-layer gold-plated contact relays. Contact type: 1 NO contact. Input voltage: 12 V DC
Maximum power consumption of 0.19 W under rated conditions
Test voltage (coil/contact) 4 k ...
|
|
Phoenix/Phoenix relay module PLC-RPT-230UC/21/EX - 2909530
PLC-INTERFACE, consisting of DIN rail mountable, 6.2 mm base terminal with plug-in interface and plug-in miniature relay with 6 A power contact, 1 changeover contact, 230 V AC/220 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 ...
|
|
PLC-RPT-120UC/21/SO46 - 1125988
PLC-INTERFACE that resists current/voltage interference on the control side. Includes PLC-BPT-120UC/21/SO46 base terminal block with plug-in connection, plug-in miniature relay with power contacts up to 6 A, 1 changeover contact, 120 V AC input voltage
Maximum ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 12DC/21AU - 2961163
Plug-in miniature power relay with multi-layer gold-plated contacts, 1 PDT, input voltage 12 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
Ruler...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/LDP-110DC/4X21 - 2903680
Plug-in industrial relay with power contacts, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2–, coil voltage: 110 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
...
|
|
Phoenix/Phoenix Single Relay REL-IR-BL/L-110DC/4X21 - 1109560
Plug-in industrial relay, basic design, with power contacts, 4 changeover contacts, test button, status LED, mechanical switch position indicator, polarity A1+, A2-, input voltage: 110 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life ...
|
|
REL-IR4/120AC/4X21/EX - Phoenix/Single Relay - 2909744
Plug-in industrial relay, RT III sealed type, with power contacts, 4 changeover contacts, mechanical switch position indicator, polarity: non-polarized, input voltage: 120 V AC, combined with RIF-2.../EX base according to ATEX/IECEx (Zone 2) and hazardous area Class I, Zone 2 ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 24DC/ 1AU/SEN - 2966317
The PLC-INTERFACE is suitable for input functions, including PLC-BSC.../SEN base terminals with screw connection with plug-in miniature multilayer gold-plated contact relays for mounting on DIN rail NS 35/7.5, 1 NO contact, input voltage 24 V DC
advantage
Maximum savings of 60 ...
|
|
The PLC-RPT-230UC/21HC relay module from Phoenix 2900297
The PLC-INTERFACE is suitable for high continuous currents and includes the PLC-BPT.../21 HC base terminal with plug-in connection with plug-in miniature relay for mounting on the DIN rail NS 35/7.5 with a limit continuous current of up to 10 A, 1 PDT, and an input voltage of 230 V AC/DC
Excellent...
|
|
Phoenix/Phoenix relay module PLC-RPT- 72UC/21/RW - 2900319
PLC-INTERFACE for rail applications, including base terminals, with plug-in connection and plug-in miniature power contact relays, range: 0.7 x UN to 1.25 x UN, temperature class TX: -40 °C to +70 °C, 1 PDT, input voltage 72 V DC
Rated ...
|
|
Phoenix/Phoenix Single Relay REL-IR-BL/L- 12DC/2X21 - 1109547
Plug-in industrial relay, basic design, with power contacts, 2 changeover contacts, test button, status LED, mechanical switch position indicator, polarity A1+, A2-, input voltage: 12 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 3 ...
|
|
RIF-3-RSC-LV-120AC/3X21 - 2903299
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 3 changeover contacts. Input voltage: 120 V AC
The maximum power consumption under rated conditions is 2.8 W
Test voltage ...
|
|
Contact
working hours
