Plug-in industrial relay, basic design, with power contacts, 2 changeover contacts, test button, status LED, mechanical switch position indicator, polarity A1+, A2-, input voltage: 12 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 3x 107 switching cycles
Insulation characteristics
Overvoltage category III
Pollution class 2
Insulation Foundation isolation
Service life, electrical aspects See graph
Test voltage 2.5 kVrms (50 Hz, 1 minute, coil/contact)
Test Voltage CO Contact/CO Contact 2.5 kVrms (50 Hz, 1 min, CO Contact/CO Contact)
Rated insulation voltage 250 V AC
Rated overvoltage 5 kV
Coil side
Rated input voltage UN 12 V DC
Input voltage range 9.6 V DC ... 20.4 V DC (20 °C)
Typical input current at UN is 63 mA
Typical response time is 15 ms
Typical release time is 10 ms
Coil voltage 12 V DC
The status display LED is yellow
Coil resistance 192 Ω ±10 %
handoff
Contact Type: 2 changeover contacts
Switch contact type Single contact
Drive and function monostability
Contact material AgNi
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 12 V (10 mA)
The continuous current is limited to 12 A
Maximum start-up current 24 A (20 ms, NO contact)
Minimum switching current 10 mA (12V)
Maximum power rating (resistive load) 288 W (24 V DC)
130 W (48 V DC)
90 W (60 V DC)
66 W (110 V DC)
88 W (220 V DC)
3000 VA (250 V AC)
Minimum on-off capacity 120 mW
Width 22.5 mm
Height 28 mm
Depth 35.5 mm
Environmental conditions
Protection class RT II
≥ IP54 (mounting position)
Ambient temperature (operating) -40 °C ... 70 °C
Ambient temperature (storage / transport) -40 °C ... 70 °C
Altitude ≤ 2000 m
Assembly Instructions Arrangement without spacing
Installation Position Any
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix single relay REL-IR-BL/L- 12DC/2X21 - 1109547 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix relay module - PLC-RPT- 24DC/ 1AU/SEN 2900313
The PLC-INTERFACE is suitable for input functions, including the PLC-BPT.../SEN base terminal with plug-in connection with plug-in miniature multilayer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 1 normally open contact, input voltage 24 V DC
advantage
No additional ...
|
|
Phoenix/Phoenix Single Relay REL-FO/LRC-120AC/1X21/MS - 1308327
"Hot" plugging miniature relay with mechanical switching position indicator, FASTON connection, 1 changeover contact, status display: LED yellow, freewheeling diode, RC element, input voltage: 120 V AC
Test voltage 5 kVrms (50 Hz, 1 minute, coil/contact)
Test...
|
|
PLC-RSC-230UC/21HC/EX - 2909521
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with screw connection and plug-in relay with 10 A power contact, 1 changeover contact, 230 V AC/220 V DC input voltage. It has been approved according to the requirements of ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 ...
|
|
Phoenix/Phoenix relay module RIF-1-RSC-LDP-12DC/1X21 - 2908500
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 1 changeover contact. Input voltage: 12 V DC
Maximum power consumption of 0.4 W under rated conditions
Test voltage ...
|
|
RIF-2-RPT-LDP-24DC/4X21 relay module from Phoenix/Phoenix - 2903308
Pre-assembled relay modules with plug-in connections, including: relay base, high-power contact relay and bracket. Contact type: 4 PDTs. Input voltage: 24 V DC
Coil side
Rated input voltage UN 24 V DC
Input voltage range 19.2 V DC ... 30 V DC （2 ...
|
|
Phoenix/Phoenix Single relay with manually operated locking function - REL-OR3/LDP-110DC/3X21 - 2908898
Pluggable octal relay with power contacts, 3 PDTs, test button, freewheeling diode, mechanical switch position display, polarity: A1+, A2-, input voltage: 110 V DC
size
Width 35 mm
Height 35 mm
Depth 54.4 mm
Environmental conditions
Ambient temperature ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 48DC/21 - 2966113
The PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and plug-in miniature relays with multi-level contacts, can be mounted on the NS 35/7.5 rail, 1PDT, input voltage 48V DC
advantage
Low-profile design
Efficient system with V8 adapter ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-120AC/21HC/MS - 2987901
Plug-in miniature relay with power contact, 1 PDT, test key, mechanical switch position display, status LED, input voltage 120 V AC
advantage
The strap can detect manual operation
Switching current up to 16 A
DC model with freewheeling diode
Integrated status LEDs
Mechanical switches ...
|
|
Phoenix/Phoenix relay module PLC-RSC-120UC/21-21/SO46 - 1125985
PLC-INTERFACE that resists current/voltage interference on the control side. Includes PLC-BSC-120UC/21-21/SO46 base terminals with screw connection, plug-in miniature relay with power contacts up to 2x 8 A, 2 changeover contacts, 120 V AC input voltage
Test Electricity ...
|
|
Phoenix/Phoenix relay module PLC-RSC-120UC/21/EX - 2909525
PLC-INTERFACE, consisting of DIN-rail mountable, 6.2 mm base terminal with screw connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 120 V AC/110 V DC input voltage. It has been approved according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 requirements.
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/200AC/4X21 - 2907056
Plug-in industrial relay with power contacts, 4 changeover contacts, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 200 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) ...
|
|
Phoenix Relays RIF-2-RPT-LV-120AC/4X21 - 2903305
Pre-assembled relay modules with plug-in connections, including: relay bases, high-power contact relays, plug-in display/suppressor modules and brackets. Contact type: 4 PDTs. Input voltage: 120 V AC
Rated input voltage UN 120 V AC
Input voltage range 96 V AC ...
|
|
Phoenix/Phoenix Time Relays Timing Relay - ETD-BL-2T-I-230-PT - 2907714
Compact pulse encoder with adjustable pulse and pause time (50 ms - 100 h), wide-area power supply, Push-in connection, 1 PDT
Product Description:
Increasing demands are placed on safety and system reliability in all areas. Mechanical engineering, chemical industry, power plants and self-propelled ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-110DC/21HC/MS - 1012737
Plug-in miniature relay with power contact, 1 changeover contact, test key, mechanical switch position indicator, status LED, freewheeling diode, polarity A1+, A2-, input voltage 110 V DC
advantage
The strap can detect manual operation
Integrated status LEDs
Switching current max. 16 A ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-230AC/21HC/MS - 2987914
Pluggable miniature relay with power contact, 1 PDT, test key, mechanical switch position display, status LED, input voltage 230VAC
advantage
The strap can detect manual operation
Integrated status LEDs
DC model with freewheeling diode
The maximum switching current is 16A
Mechanical switch position ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-110DC/21-21/MS - 1012698
Plug-in miniature relay with power contacts, 2 changeover contacts, test button, mechanical switch position indicator, status LED, freewheeling diode, polarity A1+, A2, input voltage 110 V DC
advantage
The strap can detect manual operation
DC model with freewheeling diode
Integration status l...
|
|
Phoenix/Phoenix relay module PLC-RPT-120UC/21-21AU -2900342
PLC-INTERFACE, incl. PLC-BPT.../21-21 base terminal with plug-in connection with plug-in miniature multilayer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 2 PDTs, input voltage 120 V AC/DC
advantage
Low-profile design
Via V8 adapter ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR4/L-230AC/4X21 - 2903688
Plug-in industrial relay with power contact, 4 PDT, test key, status LED, mechanical switch position display, input voltage: 230 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 12DC/21-21 - 2967235
The PLC-INTERFACE, consisting of the base terminal module PLC-BSC.../21- with screw connectors and plug-in miniature relays with multi-level contacts, can be mounted on NS 35/7.5 rails, 2PDT, input voltage 12 V DC
advantage
Low-profile design
Efficient system with V8 adapter ...
|
|
Phoenix/Phoenix single relay REL-IR-BL/L- 12DC/4X21 - 1109557
Plug-in industrial relay, basic design, with power contacts, 4 changeover contacts, test button, status LED, mechanical switch position indicator, polarity A1+, A2-, input voltage: 12 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life 3 ...
|
|
Contact
working hours
