Phoenix/Phoenix relay module - DEK-REL-G24/21 2964500

Relay module with solid state miniature power relay, contact (AgCdO): medium to large load, 1PDT, input voltage 24V DC, can be mounted on NS 35/7.5, module thickness 6.2mm

Phoenix/Phoenix relay module - DEK-REL-G24/21 2964500

advantage

Thanks to the plug-in bridge EB-DIK, wiring costs are low

Only 6.2 mm wide

The relay contacts are cadmium-free

Since it is a changeover contact, it can be normally open or normally closed, which helps to reduce capacity

Switching capacity up to 250 V AC / 6 A

Safety isolation according to DIN EN 50178 (VDE 0160)

Relay housing with IP 67 protection

LEDs are used to indicate the switching status

The input and output are 4 kV galvanically isolated

The maximum power consumption under the rated condition is 0.22 W

Test voltage Coil/contact 4 kV AC (50 Hz, 1 minute, coil/contact)

Rated insulation voltage 250 V

Rated overvoltage 6 kV

Coil side

Rated input voltage UN 24 V DC

Input voltage range 19.2 V AC/DC ... 26.4 V AC/DC （20 °C）

Typical input current at UN is 9 mA

Typical response time is 8 ms

Typical release time is 5 ms

Protection circuits polarity protection; Polarity protection diodes

spare diodes; Freewheeling diodes

The operating voltage is displayed with a yellow LED

handoff

Contact Type: 1 changeover contact

Switch contact type Single contact

Drive and function monostability

Contact material AgSnO

Maximum switching voltage 250 V AC/DC

The minimum switching voltage is 12 V AC/DC

Limit continuous current to 6 A

Max. start-up current 10 A (4 s)

The minimum switching current is 10 mA

Maximum power rating (resistive load) 140 W (24 V DC)

20 W (for 48 V DC)

18 W (can be used for 60 V DC)

23 W (for 110 V DC)

40 W (can be used for 220 V DC)

1500 VA (can be used for 250VAC)

Switching capacity 2 A (at 24 V, 13 DCs)

0.2 A (at 110 V, 13 DCs)

0.1 A (at 220 V, 13 DCs)

3 A (at 24 V, AC15)

3 A (at 120 V, AC15)

3 A (at 230 V, AC15)

Connection: Screw connection

Stripping length 8 mm

Thread M3

Rigid conductor cross-section 0.2 mm² ... 2.5 mm²

Flexible conductor cross-section 0.2 mm² ... 2.5 mm²

Attachable guide cross-section AWG 24 ... 14

Tightening torque 0.5 Nm

Environmental conditions

Ambient temperature (operating) -20 °C ... 50 °C

Ambient temperature (storage / transport) -20 °C ... 70 °C

Mounting Type: DIN rail mounting

Assembly Instructions Arrangement without spacing

Installation Position Any

All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.

The above is the Germany brand Phoenix/Phoenix relay module - DEK-REL-G24/21 2964500 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance, and give you a surprise.

Phoenix/Phoenix relay module - DEK-REL-G24/21 2964500

Sections viewed

Contact

working hours