All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
In addition, there is a key interlock type with a standard portable key that can realize hostage control, so you can carry the portable key into large equipment to ensure safety.
The actuator is mounted on the safety gate, the safety switch is installed on the mechanical body, and the gate can be automatically locked mechanically.
When the inertial operation of the machine is stopped, the electromagnetic coil is unlocked by an electronic signal from the controller, etc., for greater safety.
This is a resin safety switch with a locking strength of 3000N∗ by strengthening the locking mechanism and actuator.
The actuator insertion port of the main body has been enlarged to improve the ability to cope with the shaking of the door.
The key interlock type is available with 10 keys to choose from, eliminating the need for key swapping between adjacent devices.
There are two directions in which the actuator is inserted.
Double-insulated structure without grounding wire.
∗ Notation is a lock strength value in the horizontal direction (parallel to the panel).
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces IDEC/Hequan HS1E-K electromagnetic safety switch 3 circuit type HS1E-K840MSR-T004 products, if you are interested in IDEC/Hequan, please also contact our staff, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
IDEC/Izumi HS5E-KVD005-2A501 Safety switch with key lock
VD circuit, key detachable in all positions, Key 501, 5m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key removal location for all positions
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
Our customer-centric approach ...
|
|
IDEC/Izumi HS1E-K Solenoid Safety Switch 3 Circuit Type HS9Z-A3S
All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
There is also a key with a portable key as standard for hostage control ...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS9Z-A11T Linear Actuator W Rubber
HS1T with rubber right angle actuator
Mechanical Specifications:
Product Category Actuators
The company has been customer-centric, create value for customers concept, quality, service to win the market, sincerely hope to cooperate with all sectors of society, create success, create brilliant, work together to create a better tomorrow ...
|
|
IDEC/Izumi HS1L Type Solenoid Safety Switch HS1L-DQ44KMSRM-R
Low power consumption, built-in 6 contacts, and high level of 3000N locking strength.
The actuator is common to the HS1E type (3000N locking strength). 6. Built-in contact type, the same size as the original HS1E type.
The dimensions are 35mm× 104mm×129mm. It is possible to change the opening and closing state of the door and the lock separately.
|
|
IDEC/Izumi HS3A Non-Contact Safety Switch HS9Z-ZH31
The non-contact safety switch with RFID technology improves the safety performance.
Built-in safety features make the construction of a safety system independent of the combination with specific modules.
Thanks to the RFID method, there is no error even if the door closes slowly.
Even when installed on swing doors, sliding ...
|
|
IDEC/Izumi HS1C Electromagnetic Safety Switch HS1C-L244R-G
The actuator is mounted on the guard, the safety switch is mounted on the mechanical body, and the mechanical locking guard is installed.
When the inertial action of the machine stops, the electromagnetic coil excitation is unlocked by an electrical signal from the controller, etc., for greater safety.
In the event of a power outage and maintenance, special tools can be used ...
|
|
IDEC/Izumi HE3B Enabling Switch HE3B-M2PB
Ergonomic, 3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light operating feel, making position 2 easy to identify. Position 2 ⇒ 3 requires force and a clear sense of operation.
Reduction of operating force in position 2 ...
|
|
IDEC/Izumi HS6B Subminiature HS6B-11B01 Safety Interlock Switch 1NC1NO
IDEC/Izumi HS6B Subminiature HS6B-11B01 Safety Interlock Switch 1NC1NO 1NC 1NO Contact, 1m Cable
30x15x78mm enclosure
One-piece cables reduce wiring time
IP67 (IEC60529) waterproof sealing (contact sealing; The enclosure allows for drainage)
Open directly ...
|
|
IDEC/Izumi HE6B enabling switch HE6B-M202B
Compact 3-position enable switch with auxiliary contacts.
Ergonomic OFF→ ON → OFF 3-position action for hazard avoidance.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed.
IEC60204-1（2005） ...
|
|
IDEC/Izumi HS6E Submersible Locking HS6E-L44B03-G Safety Switch Snap Lock
IDEC/Izumi HS6E Submersible Locking HS6E-L44B03-G Safety Switch Spring Lock The world's thinnest electromagnetic interlock switch 15mm wide
Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions
Energy saving - 24V DC/110 mA
Three sides can be manually solved ...
|
|
IDEC/Izumi HS5D Safety Switch HS5D-11RN
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
IDEC/Hequan Safety Interlock HS5L Micro Lock HS5L-DD44M-G Interlock 4 Cnt Spring Lock
4 contacts, dual safety circuits, 1NC+1NC 1NC+1NC circuits, spring locks
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ISO14119 ...
|
|
IDEC/Izumi HS5D Safety Switch HS5D-03RNM
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
IDEC/Izumi HE2B Enabling Switch HE2B-M200PB
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 2 ⇒ 3 requires force and a clear sense of operation.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...
|
|
IDEC/Izumi HE2B Enabling Switch HE2B-M211PN1
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 2 ⇒ 3 requires force and a clear sense of operation.
Between pressing OFF (position 3) → releasing OFF (position 1), the structure of the ON state is not formed. IEC60204-1（2005） ...
|
|
IDEC/Izumi HS5D Safety Switch HS5D-03ZRNP
It is equipped with a "operation head detachment detection function" that turns the main circuit (11-12) into the OFF state when the operating head falls off.
It is the same size as the HS5B type (external dimensions, mounting dimensions), and is available as a 3-contact model with dual contacts + auxiliary contacts. Small size allows installation in confined places ...
|
|
IDEC/Izumi HE5B enabling switch
Round operating section with ø16 mounting holes for easy installation. Suitable for small teach pendants with 2-contact 3-position switches.
Key features:
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light ...
|
|
IDEC/Hequan Safety Interlock HS5L Miniature Lock HS5L-VJ44M-G Safety Interlock Spring Lock
Main features: compact body 35x40x127mm
1400N locking force
Spring or electromagnetic lock type
2 or 4 contact types
Spring-loaded clamp terminals
Gold-plated contacts
Head removal detection circuitry
B10d：2.0E+06
Mechanical Specifications:
Catheter opening M20
Catheter size M20
The main contact ...
|
|
IDEC/Izumi HS1C Solenoid Safety Switch HS1C-R144R-R
The actuator is mounted on the guard, the safety switch is mounted on the mechanical body, and the mechanical locking guard is installed.
When the inertial action of the machine stops, the electromagnetic coil excitation is unlocked by an electrical signal from the controller, etc., for greater safety.
In the event of a power outage and maintenance, special tools can be used ...
|
|
IDEC/Izumi HS6B Safety Switch HS9Z-A61
IDEC/Izumi HS6B type safety switch HS9Z-A61 Main features: 30mm×15mm×78mm small safety switch. 3 contacts of dual contact + auxiliary contact for applications with high safety requirements. （ISO13849-1, EN954-1）
Plugged in from 2 actuators on request
|
|
Contact
working hours
