Description: E+H/Endershaus Digital four-electrode conductivity sensor Memosens CLS82E, Memosens CLS82E are high-end hygienic sensors for applications with a wide conductivity range. A single sensor reliably monitors critical processes and final washdowns. FDA-certified, compact structure design, perfect adaptation to the actual process. Powered by Memosens 2.0 digital technology, the CLS82E supports extended data storage, saves calibration and process parameters, and allows laboratories to pre-calibrate sensors, making it the perfect basis for implementing predictive maintenance and advancing IIoT technology.
Features:
Hygienic design, material certification, EHEDG testing, 3-A and FDA certification to ensure GMP compliance. The sensor is resistant to autoclaving and autoclaving.
With Memosens technology, the sensors are equipped with a proprietary adhesion detection function to ensure that the measuring loop is always safe.
With a wide measuring range, a single sensor can reliably monitor critical processes and final rinsing steps, saving costs.
The sensor is compact and can be installed in small-diameter pipes and in small installation spaces.
The sensor cell constant is identified on the certificate of conformity and is precisely adjusted to obtain high-precision measurement results.
Contactless inductive signal transmission with high process and data integrity.
IIoT support: Memosens 2.0 supports extended data storage, storage of calibration and process parameters, and better trend identification, making it the perfect basis for implementing predictive maintenance and advancing IIoT technology.
Product parameters
Measuring principle
Electrical conductivity
apply
Phase separation, chromatography, fermentation
CIP monitoring in small pipelines
ultrafiltration
Final rinse
peculiarity
Conductivity sensors with a wide measuring range for all hygienic applications with high requirements for process safety
Measuring range
1 μS/cm to 500 mS/cm
Measuring principle
Hygienic 4-electrode conductivity sensor
devise
Certified hygienic design with FDA-compliant materials, 3-A and EHEDG approvals, can be used as a 13.5 mm sensor for PG120 and many other standard process connections
Material
Process connection: Stainless steel 1.4435 (316L)
Sensor elements: platinum and ceramic
Dimensions
Sensor diameter: 12 mm (0.47 in.)
Electrode length: Depends on the process connection
Process temperature
-5 to 120 °C (23 to 248 °F) 140 °C, 6 bar max. 45 minutes
(max. 284 °F at 87 psi, up to 45 min.)
Process pressure
17 bar abs at 20 °C (247 psi at 68 °F)
9 bar abs at 120 °C (131 psi at 248 °F)
Temperature sensor
Platinum 1000
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the E+H/Endershaus single-channel transmitter Liquiline Compact CM82 product, if you are interested in E+H/Endershaus single-channel transmitter, please also contact our staff, we look forward to your call, we hope our technology and service can bring you a better experience
|
More on that
|
E+H/Endershaus digital non-glass pH electrode Ceramax CPS341D
Description: The E+H/Endershaus digital non-glass pH sensor Ceramax CPS341D CPS341D is a durable sensor for hygienic measuring applications in the food and life sciences sectors.
Features:
Long-term stability after years of operation
Protect...
|
|
E+H/Endershaus Tuning Fork Level Meter FTL20-0220 Limit Level Detection Switch
Product introduction: FTL20-0220 is an all-in-one limit detection switch. Typically used in tank farms, vessels and pipelines, in cleaning and filtration systems and cooling and lubrication tanks, for overfill protection or to prevent pumps from running dry.
Tuning fork level meter FTL20-002B
...
|
|
E+H/Endershaus Electronic Vibration Limit Detection FTM20 Ambient temperature -40-70°C
Introduction: E+H/Endershaus Electronic Vibrating Limit Detection FTM20, Soliphant FTM20 Tuning Fork Limit Detection Switch for non-flowing solid fines and coarse materials. The versatile design is versatile and has been certified for dust explosion-proof applications.
Features:
No proofreading required...
|
|
E+H/Endershaus combination electrode Memosens CPS16D with IP68 degree of protection
Introduction: E+H/Endershaus Memosens CPS16D, Memosens CPS16D is an all-rounder pH/ORP combination electrode that performs simultaneous pH and ORP measurements for improved process control and product quality.
Features:
Simultaneous measurement of pH, ORP and rH values (in r...
|
|
E+H/Endershaus Electromagnetic Flowmeter Proline Promag H 300 Range: 0.06... 600 m³/h
Description: The E+H/Endershaus electromagnetic flowmeter Proline Promag H 300 is particularly suitable for hygienic applications and meets the highest demands in the food and beverage and life sciences industries. In combination with an all-in-one transmitter, the Promag H 300 is flexible in operation and easy to integrate: in ...
|
|
E+H/Endershaus Capacitive Limit Detection Liquipoint FTW23
Introduction: E+H/Endershaus Capacitive Limit Detection Liquipoint FTW23, Liquipoint FTW23 complies with all international hygienic requirements and is designed and manufactured for the food industry and is suitable for industrial applications in all industries. Specially designed for use with non-adherent liquid media...
|
|
E+H/Endershaus pressure transmitter PMP131-A1B01A1Q threaded connection
Product Introduction: Pressure Transmitter PMP131-A1B01A1Q economical pressure transmitter with metal sensor for gas, vapor and liquid measurement. The Cerabar PMP131 is an economical all-in-one pressure transmitter with a varistor-type, metal diaphragm sensor for absolute measurement.
|
|
E+H/Endershaus Sheath TWF11 insertion depth 1.5 mm
Introduction: E+H/Endershaus sheath tube TWF11, extremely high temperature process measuring points require a special ceramic sheath. The sheath made of special materials protects the sensor from mechanical and chemical damage during use and prolongs its service life. As a result: savings in measurement ...
|
|
E+H/Endershaus Hydrostatic Level Measurement Pilot FMX11 Communication 4-20mA
Introduction: E+H/Endershaus Hydrostatic Level Measurement Pilot FMX11, Waterpilot FMX11 transmitter is commonly used for hydrostatic level measurement in environmental applications.
Features:
Simple and reliable transmitter for a wide range of drinking water applications
Easy to install, ...
|
|
E+H/Endershaus ultrasonic level sensor FMU43 limit level detection FDU9x
Product Introduction: All-in-one measuring transmitter for non-contact level measurement of liquids, slurries and lumps Pros Menu-based on-site operation with four-line plain text display for quick and easy instrument commissioning in 7 languages Field envelope display for easy instrument troubleshooting ...
|
|
E+H/Endershaus Mass Flow Meter Proline Promass I 300 Measuring Tube 904L
Description: The E+H/Endershaus mass flow meter Proline Promass I 300 is designed with a single straight tube to measure mass flow, density and temperature at the same time as in-line viscosity measurements. The Promass I 300 is equipped with an all-in-one transmitter that offers excellent operation and system integration.
|
|
The E+H/Endershaus compact thermometer Easytemp® TMR31 complies with IEC 60751
Description: The E+H/Endershaus compact thermometer Easytemp® TMR31, TMR31 is cost-effective, space-saving, easy to install and commission, reliable in operation and meets the requirements of modern measurement technology. The built-in anti-vibration film sensor guarantees the fastest response time and the most safe work.
|
|
E+H/Endershaus Thermal mass flow meter Proline t-mass I 500
Description: The E+H/Endershaus thermal mass flow meter Proline t-mass I 500, t-mass I uses a patented sensor design and is inserted into the pipe for mass flow measurement based on the thermal principle with ultra-high measurement stability. It is able to effectively compensate for changes in process conditions in real time ...
|
|
E+H/Endershaus Modular RTD Thermometer TR13
Introduction: The E+H/Endershaus modular RTD thermometer TR13 is a highly modular, rugged thermometer for almost all industry applications. Compatible with all common communication protocols, the head-mounted transmitter is ready-to-use, with enhanced ...
|
|
E+H/Endershaus radar measurement Micropilot FMR532
Introduction: E+H/Endershaus Radar Measurement Micropilot FMR532, Micropilot FMR532 is NMi and PTB certified for metering transfer and inventory control, and meets the relevant requirements of R85 and API 3.1B standards. The FMR532 is equipped with a flat panel antenna, which is especially suitable for waveguide ...
|
|
E+H/Endershaus digital dissolved oxygen sensor Memosens COS81D
Description: E+H/Endershaus Digital dissolved oxygen sensor Memosens COS81D, Memosens COS81D dissolved oxygen sensor is ideal for hygienic applications, such as fermentation processes and inert protection against oxidation processes. COS81D sensor outputs high-precision measurement for a long time.
|
|
E+H/Endershaus Differential pressure measurement Deltabar PMD55 max. 160 bar
Introduction: E+H/Endershaus Differential pressure measurement The Deltabar PMD55 pressure transmitter with piezoresistive sensors and welded metal diaphragms is mainly used for differential pressure measurement of liquids, vapors and gases in the process or environmental industries. The measuring range is adjustable, and the fast setting simplifies the commissioning process.
|
|
E+H/Endershaus Mass Flow Meter Dosimass Maximum process pressure PN40
Description: E+H/Endershaus Dosimass mass flow meter for flow measurement during dosing and bottling. Volumetric and mass flow with temperature and density compensation can be directly measured to ensure maximum repeatability. Dosimass is suitable for measurement occasions where space is limited, and it is a system ...
|
|
E+H/Endershaus Mass Flow Meter CNGmass Maximum process pressure 5080 psi
Introduction: E+H/Endershaus mass flow meter CNGmass, the accuracy of the dispenser is as important as the accuracy required to measure any other fuel when it comes to measuring and settling CNG. Therefore, the "brain" of every CNG dispenser is a measurement that measures everything from the dispenser to the tank truck ...
|
|
E+H/Endershaus Tuning Fork Limit Detection Liquiphant FTL80 Power Supply 4-20mA
Introduction: E+H/Endershaus Tuning Fork Limit Detection Liquiphant FTL80, Liquiphant FTL80 Tuning Fork Limit Switch can be used in explosion hazard areas, has passed multiple international certifications, with fail-safe, over-over-protection function, functional safety level up to SIL3, reliable measurement, not subject to ...
|
|
Contact
working hours
