Pluggable industrial relay with power contacts and additional hard gold plating, 4 PDTs, test keys, status LEDs, freewheeling diodes, mechanical switch position display, polarity: A1+, A2-, coil voltage: 24 V DC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 70 °C
Ambient temperature (storage / transport) -40 °C ... 85 °C
Protection class RT I
Coil side
Rated input voltage UN 24 V DC
Typical input current at UN is 42 mA
Typical response time is 13 ms
Typical release time is 14 ms
Protection circuit: Damping diode
The status display LED is yellow
Power consumption at rated conditions is 1.01 W
Contact side
Contact Type: 4 PDT
Switch contact type Single contact
Contact material AgNi, hard gold plating
Precautions When the given limit values are exceeded, the gold plating layer is destroyed. If it continues to be used, the maximum value of the high-power relay applies. Compared to using the power contact alone, the service life is reduced.
The maximum switching voltage is 30 V AC
36 V DC
Minimum switching voltage 2 V (at 24 mA)
Minimum switching current 2 mA (24 V DC)
The maximum starting current is 50 mA
Limit continuous current to 50 mA
Maximum power rating (resistive load) 1.2 W (24 V DC)
The minimum on-off capacity is 48 mW
Motor load 1/3 HP, 240 V AC in accordance with UL 508
Contact surface (with destructible gold plating)
Contact material AgNi
Precautions If the plating is damaged, the following values can be applied
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (at 24 mA)
Limit continuous current to 6 A
Max. start-up current 16 A (20 ms, NO-contact)
Minimum switching current 5 mA (24 V)
Maximum power rating (resistive load) 144 W (24 V DC)
124 W (for 48 V DC)
108 W (can be used for 60 V DC)
52 W (for 110 V DC)
48 W (can be used for 220 V DC)
1500 VA (can be used for 250VAC)
Switching capacity 2 A (at 24 V, 13 DCs)
0.22 A (at 120 V, 13 DCs)
0.11 A at 250 V, DC13
1.5 A (at 24 V, AC15)
1.5 A (at 120 V, AC15)
1 A (at 240 V, AC15)
overview
Test voltage 2.5 kVrms (50 Hz, 1 minute, coil/contact)
2 kVrms (50 Hz, 1 minute, CO contact/CO contact)
Mode of operation 100% working factor
Mechanical life: approx. 2x 107 cycles
Installation Position Any
Connection: Push-in connection
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix/Phoenix single relay with manual operation locking function - REL-IR4/LDP- 24DC/4X21AU - 2903670 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
DEK-REL- 5/I/1 - 2941183 relay modules from Phoenix
Relay module with solid state miniature relay, contacts (AgNi+Au): Small to medium loads, 1 NO contact, input voltage 5 V AC/DC, can be mounted on NS 35/7.5, module thickness 6.2 mm
advantage
Reduced costs due to the elimination of N-terminals
Save up to 73 % on ...
|
|
Phoenix/Phoenix relay module EMG 17-REL/KSR- 48/21-21-LC -2940401
Relay module with solid-state miniature electromagnetic relay, contact (AgNi): medium to large load, 2PDT, input voltage 48 V AC/DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Integrated input module and interference suppression module
Rated ...
|
|
Phoenix/Phoenix relay module EMG 10-REL/KSR-120/ 1-LC AU - 2964461
Relay module with solid-state miniature electromagnetic relay, gold-plated contacts for small loads, 1 NO contact, input voltage 120 V AC/DC
Advantages: Integrated input module and interference suppression module
The maximum power consumption under rated conditions is 0.6 W
Test voltage (coil/contact) ...
|
|
Phoenix/Phoenix relay module PLC-RSC-12DC/21/EX - 2909522
PLC-INTERFACE, consisting of DIN rail mountable, 6.2 mm base terminal with screw connection and plug-in miniature relay with 6 A power contact, 1 changeover contact, 12 V DC input voltage. Certified according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2 ...
|
|
Phoenix/Phoenix Single Relay - REL-MR- 12DC/21HC AU 2961532
Pluggable miniature power relay with multi-layer gold-plated contacts for high continuous current, 1 PDT, input voltage 12 V DC
advantage
RT III certified (wash-resistant)
Switching current up to 16 A
Coil side
Rated input voltage UN 12 V DC
Input voltage range 7.8 ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-BL-100AC/21HC/MS - 2908179
Plug-in miniature relay with power contact, 1 changeover contact, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 100 V AC
size
Width 13 mm
Height 29 mm
Depth 25.5 mm
Environmental conditions
Ambient temperature (operating) -40 ...
|
|
REL-MR- 24AC/21HC AU - 2961503
Plug-in miniature power relay with multi-layer gold-plated contacts for high continuous current, 1 PDT, input voltage 24 V AC
advantage
RT III certified (wash-resistant)
Switching current up to 16 A
handoff
Contact Type: 1 changeover contact
Switch contact type Single contact
...
|
|
Phoenix/Phoenix relay modules EMG 22-REL/KSR-G 24/TRN12 - 2952363
Relay module with miniature switching relay with integrated NPN transistor control, low control current, contact (AgNi): medium to large load, 1PDT, rated control voltage 12V DC
advantage
Low control current (module B), 0.5 mA depending on the model
Between the coil and the contacts ...
|
|
Phoenix/Phoenix relay module PLC-RSC-230UC/21-21/EX - 2909512
PLC-INTERFACE, consisting of DIN rail mounting, 14 mm base terminal with screw connection and plug-in relay with power contacts, 2 changeover contacts, 230 V AC/220 V DC input voltage. Certified according to ATEX/IECEx (Zone 2) and Ex Area Class I, Zone 2
|
|
Phoenix/Phoenix Single Relay REL-MR- 60DC/21 - 2961118
Plug-in miniature power relay with power contacts, 1 PDT, input voltage 60 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
Product Category ...
|
|
Phoenix/Phoenix Single Relay REL-MR- 24DC/ 1ICT - 2987338
Pluggable miniature power relay with tungsten front contacts for high impulse currents up to 800 A peak, 1 NO contact, input voltage: 24 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection can be achieved up to RT I...
|
|
Phoenix/Phoenix relay module PLC-RPT-120UC/21-21/SO46 - 1136244
The use of a PLC-INTERFACE prevents interference currents or voltages on the control side. Includes base terminal with plug-in connection, with "hot" plug-in miniature relay with up to 2x 8 A power contacts, 2 changeover contacts, 120 V AC input voltage
Test voltage (coil/contact ...
|
|
RIF-1-RSC-LV-24AC/2X21AU relay module from Phoenix/Phoenix - 2903345
Prefabricated relay modules with screw connections, including: relay bases, multi-layer contact relays, pluggable display/interference mitigation modules, and brackets. Contact type: 2 changeover contacts. Input voltage: 24 V AC
The maximum power consumption under rated conditions is 0.79 W
Test voltage ...
|
|
Phoenix/Phoenix relay module PLC-RPT-120UC/21-21AU -2900342
PLC-INTERFACE, incl. PLC-BPT.../21-21 base terminal with plug-in connection with plug-in miniature multilayer gold-plated contact relay for mounting on DIN rail NS 35/7.5, 2 PDTs, input voltage 120 V AC/DC
advantage
Low-profile design
Via V8 adapter ...
|
|
Phoenix/Phoenix relay module RIF-2-RPT-LV-230AC/4X21/EX-2909739
Prefabricated relay modules include: relay base, plug-in function module, power contact relay and bracket, certified according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Zone 2, Push-in connection, 4 PDTs, varistor, input voltage: 230 V AC
...
|
|
RIF-1-RPT-LV-230AC/2X21 relay module from Phoenix/Phoenix - 2903331
Pre-assembled relay modules with plug-in connections, including: relay bases, high-power contact relays, plug-in display/suppressor modules and brackets. Contact type: 2 PDT. Input voltage: 230 V AC
Coil side
Rated input voltage UN 230 V AC
Input...
|
|
Phoenix/Phoenix Single Relay REL-MR- 24DC/1IC - 2961341
Plug-in miniature power relay with power contacts for high impulse currents up to 130 A peak, 1 NO contact, input voltage: 24 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III ...
|
|
Phoenix/Phoenix relay module PLC-RSC- 24DC/21HC - 2967620
PLC-INTERFACE FOR HIGH CONTINUOUS CURRENT, INCL. PLC-BSC.../21 HC BASE TERMINAL WITH SCREW CONNECTION AND "HOT" MATING MINIATURE RELAY FOR MOUNTING ON NS 35/7,5 DIN RAIL, LIMIT CONTINUOUS CURRENT UP TO 10 A, 1 CO CONTACT, INPUT VOLTAGE 24 V DC
...
|
|
REL-MR-120AC/21HC - 2961419 single relay from Phoenix
Plug-in miniature power relay with power contacts for high continuous current, 1 PDT, input voltage 120 V AC
Advantage: Switching current up to 16 A
Coil side
Rated input voltage UN 120 V AC
Input voltage range 93.6 V AC ... 186 V AC
...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 12DC/21AU/MS - 2909644
Plug-in miniature power relay with multi-layer gold-plated contacts, 1 changeover contact, manual operation, 12 V DC input voltage
size
Width 5 mm
Height 28 mm
Depth 16 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 85 °C
Ambient temperature (storage ...
|
|
Contact
working hours
