|
IDEC/Izumi HS3A non-contact safety switch HS9Z-H3TP
The non-contact safety switch with RFID technology improves the safety performance.
Built-in safety features make the construction of a safety system independent of the combination with specific modules.
Thanks to the RFID method, there is no error even if the door closes slowly.
Even when installed on swing doors, sliding ...
|
|
IDEC/Hequan Safety Interlock HS5L Micro Lock HS5L-XF7Y4M-G Interlock 2 CNT Solenoid Lock
2 contacts, 2NC door monitoring circuitry, electromagnetic lock
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ISO14119
GS-ET-19
|
|
IDEC/Izumi HS5B Safety Switch HS5B-02ZBM
Small size: 30mm× 30mm×90mm, by changing the mounting direction of the top, the actuator can be inserted from 8 positions, so as to meet different installation needs.
IP67 (IEC60529) protection structure is used for the contact parts.
The NC contact has a direct disconnect operation structure. (IEC/EN60947 ...
|
|
IDEC/Izumi HS5E-KVA005-2A safety switch with key lock
VA circuit, key detachable in all positions, 5m cable
Mechanical Specifications:
Product Category Safety Interlocks
Key removal location for all positions
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
We...
|
|
IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS9Z-A1S
All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
There is also a key with a portable key as standard for hostage control ...
|
|
IDEC/Izumi HS7A-DMP non-contact safety switch
Three new contact types have been added, and the opening and closing status of the door can be monitored by connecting the auxiliary contact to the PLC
Key features:
By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored. Ideal for installation on protective doors where positioning is difficult. By adapting ...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS9Z-A12T Right Angle Actuator W Rubber
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS9Z-A12T Right Angle Actuator W Rubber Tape Rubber Right Angle Actuator
Product Category Actuators
The company has always been customer-centric, the concept of creating value for customers, and winning the market with quality and service.
|
|
IDEC/Izumi HS1E-K Type Solenoid Safety Switch 3 Circuit Type HS1E-K844MSRP-R-T001
All M3.5 wiring screws are used to improve the connection line.
The contact structure is 2 circuits with 1NC+1NC main circuit and 1NC auxiliary circuit, and it is possible to support dual main circuit + lock monitoring circuit.
There is also a key with a portable key as standard for hostage control ...
|
|
IDEC/Izumi HE1G-L Handheld Enabling Switch HE1G-L21SM-1N
3-position action of OFF ⇒ ON ⇒ OFF for danger avoidance.
Press OFF (position 3) ⇒ release OFF (position 1) to create an ON structure. (IEC60204-1:2005, 10.9, IEC60947-5-8:2007, 7.1.9), built-in 2 ...
|
|
IDEC/Izumi HE2G Hand-held enabling switch
Small, lightweight, hand-held enabling switch with superior grip.
Key features:
Lightweight design with excellent grip.
The ergonomic grip design provides comfortable operation with its compact and comfortable grip shape. Lightweight (HE2G-21SH type approx. 140g...)
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-XH7Y4ZM-G
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-XH7Y4ZM-G 2 contacts 2NC, solenoid lock
5000N locking force is the smallest in the industry
Spring-loaded terminals prevent loose wires
Energy saving 200mA solenoid consumption
Electromagnetic lock and snaplock models are available
Mechanical Specifications:
Catheter open ...
|
|
IDEC/Izumi Safety Interlock HS5L Micro Lock HS5L-VA7Y4SM-G Interlock 4 Cnt Solenoid Lock
4 Contacts, 1NC 1NO Gate, 1NC 1NO Lock Monitoring Circuit, Electromagnetic Lock
Compact body: 35x40x127mm
1400N locking strength
Gold-plated contacts for small loads
The head direction can be rotated
8 different actuator entries are allowed
Applicable standard: EN ISO14119
G ...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VF7Y4ZM-G
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-VF7Y4ZM-G 4 contacts 3NC and 1NC, solenoid lock
5000N locking force is the smallest in the industry
Spring-clamp terminals prevent loose wires
Energy saving 200mA solenoid consumption
Electromagnetic lock and snaplock models are available
Mechanical Specifications:
...
|
|
IDEC/Izumi HE5B enabling switch
Round operating section with ø16 mounting holes for easy installation. Suitable for small teach pendants with 2-contact 3-position switches.
Key features:
Ergonomic OFF ⇒ ON ⇒ OFF 3-position action for danger avoidance.
Position 1 ⇒ 2, built-in snap-action switch with a light ...
|
|
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-XD7Y4ZM-G
IDEC/Izumi Safety Interlock HS1T Heavy Duty Locking HS1T-XD7Y4ZM-G 2 contacts 1NC and 1NC, electromagnetic lock
5000N locking force is the smallest in the industry
Spring-loaded terminals prevent loose wires
Energy saving 200mA solenoid consumption
Electromagnetic lock and snaplock models are available
Mechanical Specifications:
...
|
|
IDEC/Izumi HS6E Submersible Locking HS6E-P7Y4B05-G Safety Switch Solenoid Lock
The world's thinnest solenoid interlock switch is 15mm wide
Flexible installation - reversible mounting and angled cables allow for four actuator insertion directions
Energy saving - 24V DC/110 mA
Three sides can be manually unlocked
The LED indicator shows solenoid valve operation
Standard 3m cable (available on request)
|
|
IDEC/Izumi HE1G-L Handheld Enabling Switch HE9Z-GP15
The resin-based actuator for HS5 series safety switches can be easily mounted to the hand-held enabling switch with the two screws included.
By combining a resin-based actuator with an HS5 series safety switch fixed to a mechanical device, it is easy to maintain the hand ...
|
|
IDEC/Izumi HE2G Handheld Enabling Switch HE2G-21SCE-L-L
Lightweight design with excellent grip.
The ergonomic grip design provides comfortable operation with its compact and comfortable grip shape. Lightweight (approx. 140g for HE2G-21SH type) and compact size, it can be easily held even by users with small palms.
|
|
IDEC/Izumi HS5E-KVA0L05-2A501 Safety switch with keylock
VA circuit, key removable in all positions, key 501, 5m cable, rear unlock button
Mechanical Specifications:
Product Category Safety Interlocks
Key removal location for all positions
Environmental indicators
Degree of protection IP65
Installation and installation specifications
Cable length: 5 meters
We take our customers as the ...
|
|
IDEC/Izumi HS7A-DMP non-contact safety switch HS7A-DMP5002
By connecting the signal of the auxiliary contact directly to the PLC, the operation of each HS7A-DMP non-contact safety switch can be monitored.
Ideal for installation on protective doors where positioning is difficult.
With the appropriate combination of dedicated safety relay modules, it is possible to correspond to safety category 4 and can be connected to up to 36 groups, protection, etc.
|