PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation, integrated status LEDs and freewheeling diode, Push-in connection, 1 changeover contact, input voltage: 24 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
Environmental conditions
Ambient temperature (operating) -20 °C ... 60 °C
Ambient temperature (storage / transport) -20 °C ... 85 °C
Maximum height ≤ 2000 m
Protection class RT II (relay)
IP20 (Relay Base)
≥ IP54 (mounting position)
Coil side
Rated input voltage UN 24 V DC
Typical input current at UN is 18 mA
Typical response time is 10 ms
Typical release time is 10 ms
Coil voltage 24 V DC
Protection Circuits Polarity Protection Polarity Protection Diodes
Standby diode Damping diode
The operating voltage is displayed with a yellow LED
Contact side
Contact Type: 1 changeover contact
Switch contact type Single contact
Contact material AgNi
Maximum switching voltage 250 V AC/DC (When the voltage between the same terminal blocks of two adjacent modules is greater than 250 V (L1, L2, L3), a bulkhead PLC-ATP must be used. FBST 8-PLC… Or... FBST 500… for equipotential bridging)
Minimum switching voltage 12 V (10 mA)
Minimum switching current 10 mA at 12 V
Maximum start-up current 24 A (20 ms)
Limit continuous current to 10 A
Maximum power rating (resistive load) 264 W (24 V DC)
62 W （48 V DC）
48 W （60 V DC）
52 W （110 V DC）
66 W （220 V DC）
2750 VA （250 V AC）
Switching capacity 2 A (24 V, DC13)
3 A （230 V, AC15）
overview
Test voltage 4 kVrms (50 Hz, 1 minute, coil/contact)
Mode of operation 100% working factor
Flammability rating according to UL 94 V0 (enclosure)
Mechanical life 5x106 switching cycles
Installation Position Any
Assembly Instructions Arrangement without spacing
Connect your data
Connection Name Coil Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Connect to data2
Connection Name Contact Side
Connection: Push-in connection
Stripping length 8 mm
Rigid conductor cross-section 0.14 mm² ... 2.5 mm²
Flexible conductor cross-section 0.14 mm² ... 2.5 mm²
0.2 mm² … 2.5 mm² (single sleeve)
2x 0.5 mm² … 1 mm² (TWIN sleeve)
Attachable guide cross-section AWG 26 ... 14
Standards and Specifications
Name Standards/Regulations
Standard/Procedure EN 50178
Rated insulation voltage 250 V AC
Rated overvoltage 6 kV
Insulation: Safety isolation, reinforced insulation
Pollution class 2
Overvoltage category III
UL, United States UL 508
UL 508 Recognized
UL, United States/Canada cUL 508
cUL 508 recognized
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original **, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, money.
The above is the Germany brand Phoenix relay module with manual operation locking function - PLC-RPT- 24DC/21HC/MS - 2910530 products, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR2/100AC/2X21 - 2907052
Plug-in industrial relay with power contacts, 2 changeover contacts, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 100 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) ...
|
|
REL-PR1-24DC/1/MB - 2908040
Plug-in high-power relay with power contacts, specially designed for switching high DC loads, 1 NO contact, arc extinguishing magnet, coil voltage: 24 V DC
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life: approx. 2x 107 cycles
Insulation characteristics
Overvoltage Category ...
|
|
PLC-RPT-120UC/21/SO46 - 1125988
PLC-INTERFACE that resists current/voltage interference on the control side. Includes PLC-BPT-120UC/21/SO46 base terminal block with plug-in connection, plug-in miniature relay with power contacts up to 6 A, 1 changeover contact, 120 V AC input voltage
Maximum ...
|
|
Relay module with manually operated locking - PLC-RSC-125DC/21AU/MS - 2909658
PLC-INTERFACE, incl. PLC-BSC.../21 base terminal, screw connection, plug-in miniature relay with multi-layer gold-plated contacts and manual operation, 1 changeover contact, 125 V DC input voltage
size
Width 6.2 mm
Height 80 mm
Depth 9 ...
|
|
Phoenix/Phoenix relay module RIF-3-RSC-LDP-24DC/3X21 - 2903300
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, and brackets. Contact type: 3 changeover contacts. Input voltage: 24 V DC
The maximum power consumption under rated conditions is 1.44 W
Test voltage (coil/contact) 2.5 kVrms (5 ...
|
|
RIF-2-RSC-LV-120AC/4X21 relay module from Phoenix/Phoenix - 2903317
Prefabricated relay modules with screw connections, including: relay bases, power contact relays, pluggable display/interference suppression modules, and brackets. Contact type: 4 changeover contacts. Input voltage: 120 V AC
The maximum power consumption under rated conditions is 1.56 W
Test voltage ...
|
|
Phoenix/Phoenix relay module PLC-RSC-125DC/21 - 2980021
The PLC-INTERFACE, consisting of the base terminal block PLC-BSC.../21- with screw connection and pluggable miniature relays with power contacts, can be mounted on the DIN rail NS 35/7.5, 1PDT, input voltage 125 V DC
The maximum power consumption under rated conditions is 0.38 W
Test Electricity ...
|
|
Phoenix/Phoenix relay module PLC-RPT-230AC/21-21/SO46/HI - 1079389
The PLC-INTERFACE consists of PLC-BSC.../21-21/SO46/HI base terminals with plug-in interface and Push-in miniature relay with power contacts, 2 changeover contacts, rated input voltage 230 V AC, and defined activation and deactivation thresholds
Maximum power consumption under rated conditions ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-IR2/L-230AC/2X21 - 2903668
Plug-in industrial relay with power contacts, 2 PDTs, test keys, status LEDs, mechanical switch position display, input voltage: 230 V AC
size
Width 21.2 mm
Height 27.5 mm
Depth 35.6 mm
Environmental conditions
Ambient temperature (operating) -40 °C ... 55 ...
|
|
Phoenix/Phoenix Single Relay REL-MR- 60DC/21-21AU - 2961286
Pluggable miniature power relay with multi-layer gold-plated contacts, 2 PDTs, input voltage 60 V DC
Benefits: RT III certified (wash-resistant)
Coil side
Rated input voltage UN 60 V DC
Input voltage range 39 V DC ... 148.8 V DC
Typical input current at UN ...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR- 12DC/21 - 2961150
Plug-in miniature power relay with power contacts, 1 PDT, input voltage 12 V DC
advantage
Secure isolation between coil and contact in accordance with DIN EN 50178
Depending on the model, the maximum degree of protection up to RT III (wash-resistant)
The maximum contact power is 6 A
size
...
|
|
Phoenix/Phoenix Single relay with manually operated locking - REL-MR-230AC/21-21/MS - 2987972
Pluggable miniature relay with power contacts, 2 PDTs, test key, mechanical switch position display, status LED, coil voltage 230VAC
advantage
The strap can detect manual operation
DC model with freewheeling diode
Integrated status LEDs
The maximum switching current is 16A
Mechanical switch position ...
|
|
RIF-2-RPT-LV-120AC/4X21/EX-2909740 relay module from Phoenix
Prefabricated relay modules include: relay base, plug-in function module, power contact relay and bracket, certified according to ATEX/IECEx (Zone 2) and hazardous area Class I, Zone 2, Push-in connection, 4 PDTs, varistor, input voltage: 120 V AC
...
|
|
Phoenix/Phoenix relay module PLC-RPT- 60DC/21HC - 2900295
The PLC-INTERFACE is suitable for high continuous currents and includes the PLC-BPT.../21 HC base terminal with plug-in connection with plug-in miniature relay for mounting on DIN rail NS 35/7.5 with ultimate continuous current up to 10 A, 1 PDT, input voltage 60 V DC
advantage
...
|
|
Relay module with manually operated locking - PLC-RSC- 24UC/21HC/MS - 2910515
PLC-INTERFACE, incl. relay base and pluggable power contact relay with manual operation and integrated status LED, screw connection, 1 changeover contact, input voltage: 24 V AC/DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
Environmental conditions
...
|
|
Phoenix/Phoenix relay module RIF-1-RPT-LV-24AC/2X21AU-2903329
Pre-assembled relay modules with Push-in connections, including: relay bases, multi-layer contact relays, pluggable display/interference suppression modules, and fixing brackets. Contact switching type: 2 changeover contacts. Input voltage: 24 V AC
The maximum power consumption under rated conditions is 0.79 W
Measure...
|
|
Relay module with manually operated locking - PLC-RSC-120UC/21-21/MS - 2910505
PLC-INTERFACE, including relay base and pluggable power contact relay (with manual operation and integrated status LED), screw connection, 2 changeover contacts, input voltage: 120 V AC / 110 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
...
|
|
REL-SR- 24DC/2X1AU/2X2AU/FG - 1158056
Safety relays with mechanically interlocking contacts in accordance with DIN EN 61810-3 (Class A), input voltage 24 V DC, with multi-layer gold-plated contacts, 2 NO contacts and 2 NC contacts
Product Type: Single relay
Mode of operation 100% working factor
Mechanical life approx. 107 open
|
|
Phoenix/Phoenix Single Relay REL-MR- 12DC/21-21AU - 2961299
Pluggable miniature power relay with multi-layer gold-plated contacts, 2 PDTs, input voltage 12 V DC
Benefits: RT III certified (wash-resistant)
Coil side
Rated input voltage UN 12 V DC
Input voltage range 7.8 V DC ... 29.76 V DC
Typical input current at UN ...
|
|
Relay module with manually operated locking - PLC-RSC-120UC/21HC/MS - 2910517
PLC-INTERFACE, including relay base and pluggable power contact relay with manual operation and integrated status LED, screw connection, 1 changeover contact, input voltage: 120 V AC / 110 V DC
size
Width 14 mm
Height 80 mm
Depth 104 mm
...
|
|
Contact
working hours
