XINJE/XINJE VB5 series inverter 4.5KVA

Introduction: VVVF control, high-performance, simple, low-noise inverter, on the premise of improving stability, adds practical PI adjustment, flexible input and output terminals, parameter online modification, fixed-length control, swing frequency control, RS485 control, fieldbus control and a series of practical and advanced operation and control functions, for equipment manufacturing and terminals.

　　Product parameters

Model: VB522P2

Voltage level: 220V single phase

Rated capacity (KVA): 4.5

output

Rated output current (A): 10.0

Adapter motor (KW): 2.2

Rated voltage (V): AC 220

Frequency range (Hz): 0-500

Frequency resolution (Hz): 0.01

Overload capacity: 150% rated current for 1 minute, 180% rated current for 1 second

Rated voltage/frequency: single-phase 220V, 50/60Hz

Allowable fluctuation range of AC voltage: Voltage: -20% —— +20% Voltage imbalance rate: <3%

Allowable Frequency Fluctuation Range: Frequency: ±5%

Power Capacity (KVA): 4.5

Main control functions

Modulation mode: Optimized spatial voltage vector SVPWM modulation

Control mode: space voltage vector SVPWM control (with optimal low-frequency dead-time compensation characteristics)

Frequency accuracy: digital setting: maximum frequency×±0.01%; Analog setting: Maximum frequency×±0.2%

Frequency Resolution: Digital Setting: 0.01Hz, Analog Setting: Maximum Frequency×0.1%

Starting frequency: 0.40Hz-20.00Hz

Torque Lift: Automatic Torque Lift, Manual Torque Boost 0.1%-30.0%

V/F curves: 5 modes: constant torque V/F curve, 1 user-defined multi-segment V/F curve and 3 reduced torque characteristic curves (2.0 power, 1.7 power, and 1.2 power)

Acceleration and deceleration curve: two modes: linear acceleration and deceleration, S-curve acceleration and deceleration; Seven acceleration and deceleration times, selectable in time units (minutes/seconds), up to 6000 minutes

DC braking: DC braking start frequency: 0-15.00Hz Braking time: 0-60.0 seconds Braking current: 0-80%

Energy braking: Built-in energy braking unit, external braking resistor

Jog: Jog frequency range: 0.1Hz-50.00Hz, jog acceleration and deceleration time 0.1-60.0 seconds

Built-in PI: It can easily form a closed-loop control system

Multi-speed operation: Multi-speed operation is realized through built-in PLC or control terminals

Textile pendulum frequency: It can realize the function of preset frequency and center frequency adjustable

Automatic Voltage Adjustment (AVR): Keeps the output voltage constant when the grid voltage changes

Automatic energy-saving operation: According to the load situation, the V/F curve is automatically optimized to achieve energy-saving operation

Automatic current limiting: The current is automatically limited during operation to prevent frequent overcurrent fault tripping

Fixed-length control: the inverter stops when the set length is reached

Communication function: It has RS485 standard communication interface and supports Modbus-RTU format communication protocol. Master-slave multi-machine linkage function (function under development)

Run the function

Run Command Channel: Given by the operation panel; The control terminal is given; serial port given. The three modes can be switched between each other

Frequency setting channel: keypad analog potentiometer given; keyboard, key given; The function code is given by a number; serial port given; Terminal UP/DOWN given; analog voltage given; Analog current given; Pulse given; Combination given; A variety of given methods can be switched at any time

Switch input channel: forward and reverse commands; 6 programmable switching inputs, 35 functions can be set respectively, X6 supports 0-20KHz pulse input

Analog input channel: 2 analog signal inputs: 4-20mA, 0-10V optional

Analog output channel: 1 analog signal output: 0-10V, 4-20mA, which can realize the output of physical quantities such as set frequency and output frequency

Switch, pulse output channel: 1 programmable open collector output; 1 relay output signal; 1 channel 0-20KHz pulse output signal to achieve a variety of signal output

Operator panel

LED digital display: display set frequency, output voltage, output current and other parameters

External instrument display: output frequency, output current, output voltage display and other physical quantity display

Key Lock: Locks all keys

Protection function: over-current protection; Overvoltage protection; Under-voltage protection; Overheat protection; overload protection, etc

Optional: brake assembly; operation panel; Operator panel extension cable

We will provide customers with high-quality products and satisfactory services with honest and trustworthy, convenient and fast business methods and strict management.

This article introduces the XINJE/XINJE VB5 series inverter 4.5KVA products, if you are interested in the XINJE/XINJE inverter, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

XINJE/XINJE VB5 series inverter 4.5KVA

Sections viewed

Contact

working hours