CD55B50-80M Introduction: SMC C55 Series 1 MPa 80mm Stroke Double Acting Single Rod Pneumatic Compact Cylinder CD55B50-80M, 50mm bore, 133 x 64 x 64mm
Japan SMC_CD55B50-80M picture display
Model features introduced
ISO compact C55 cylinder
ISO standard compact cylinder with hard anodized aluminum body. A double-acting model is available with a standard magnetic piston.
ISO Standard 21287 Compact Magnetic Sensing
Note: Fastening elements should be ordered separately.
Standard ISO21287
Model parameters are introduced
attribute | numeric value | itinerary | 80mm | calibre | 50mm | action | pair | Manufacturer series | C55 | pole | single | Port connections | G1/8 | Buffer type | rubber | size | 133x64x64mm | length | 133mm | width | 64mm | Maximum operating pressure | 1MPa | height | 64mm | Absolute maximum pressure | 1.5Mpa | Minimum operating temperature | -10°C | Maximum operating temperature | +70°C | weight | 1kg |
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-confidence stems from our strict requirements for product quality, adhere to the original genuine products, fake one pay ten, if there is a demand, welcome to consult the delivery date and price, we will select the best quotation for you in many channels, 76 technology multi-brand one-stop procurement, save you time, worry, save money.
This article introduces the Japan brand SMC model is CD55B50-80M, the introduction of this product is: SMC C55 series 1 MPa 80mm stroke double acting single rod pneumatic compact cylinder CD55B50-80M, 50mm bore, 133 x 64 x 64mm, the purpose of 76 technology is to survive by quality, develop by reputation, and eternal by service, give us a chance and give you a surprise.
|
More on that
|
Japan SMC cylinder CJ2RA-Z
Metal mounts with both feet and rodless side flanges have been added.
・Magnetic switch operability is improved and position adjustment is easier.
・Magnetic switch track mounting type has been added.
・Added models with rod end metal mounts and swing metal mounts (no need to equip them separately)
・ ...
|
|
Japan SMC_CDQMB16-30 Compact Guide/Guide Cylinder
CDQMB16-30 Introduction: SMC Pneumatic Guide Rod Cylinder CQM Series CDQMB16-30
Japan SMC_CDQMB16-30 picture show
Model features introduced
SMCCQM Compact Guide/Guide Cylinder
SMCCQM Compact Guide/Guide Cylinder can be directly loaded, and the side load bearing capacity is S...
|
|
Japan SMC cylinder CA2W□H
Up to 15% reduction in mass.
・Air cushioning control is easy.
・It can be installed from small magnetic switches to highly magnetic-resistant switches.
・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately).
・With magnetic switch (CDA2 series: CDA2, ...)
|
|
Japan SMC Dust-Resistant Cylinder CG1-XC4□
CM2-XC4□ New has been added
The durability in the dust environment is 6 times that of the standard product
Corresponding to powder with particle size of 20-100μm
Compatible with ceramic powder, toner, paper powder, and metal powder
*Welding slag is excluded
・You can choose according to your application
The piston rod part is equipped with a lubrication retainer (lubrication retention) ...
|
|
Japan SMC cylinder MB-Z series
By changing the shape of the cylinder head, the maximum mass has been reduced by 10%.
・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately).
・With magnetic switch (MDB-Z series: MDB, MDBW, MDBK,
MDBKW,MDBB,MDB□Q)。
Action...
|
|
Japan SMC_CD85N12-50-B Double Acting Pneumatic Fine Cylindrical Cylinder
CD85N12-50-B Introduction: SMC C85 Series Double Acting Pneumatic Fine Cylindrical Cylinder CD85N12-50-B, 50mm stroke, 1 MPa max operating pressure, 12mm bore diameter
Japan SMC_CD85N12-50-B photo show
Model features introduced
SMCC85 cylinder
SMCC85 Cylinder Charm ...
|
|
Japan SMC Sanitary Cylinder HY□/HYD□
A water-resistant cylinder with a shape that is easy to clean.
・Not only is the water resistance improved, but the service life is more than 5 times that of conventional cylinders (compared to our products).
・With magnetic switch (HYDB series: HYDB, HYDQB series: HYDQB,
HYDC series: HYDC, HYDG series: HYDG).
...
|
|
Japan SMC floating joint JT series
Neutralize the "eccentricity" or "insufficient parallelism accuracy" of the cylinder.
So that the pivot does not need to coincide.
Model: Lightweight and compact
Applicable bore (mm): 20, 25, 32, 40
All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods are from manufacturers or regular agents.
|
|
Japan SMC_D-H7BAL Double Acting Cylinder 3m Flying Lead Reed Switch
D-H7BAL Introduction: SMC CJ2 Series Solid State Switch D-H7BAL, 3m flying lead
Japan SMC_D-H7BAL photo show
Model features introduced
CDJ5D reed switch
Suitable for use with CDJ5D double-acting cylinders, supplied with 3m lead strap, individually IP67 rated ...
|
|
Japan SMC_CDQ2B40-20DCZ Double Acting Single Rod Pneumatic Compact Cylinder
CDQ2B40-20DCZ Introduction: SMC CQ2 Series 20mm Stroke Double Acting Single Rod Pneumatic Compact Cylinder CDQ2B40-20DCZ, 40mm bore, 66.5 x 52 x 52mm
Japan SMC_CDQ2B40-20DCZ picture display
Model features introduced
CQ2 series compact cylinders
...
|
|
Japan SMC powder resistant cylinder CM2-XC92
・Suitable for use in environments where fine powders such as ceramic powder, toner powder, paper powder, and metal powder (excluding welding slag for welding) float
・Durability improved by 4 times (for standard products)
・The rod side cylinder head is equipped with two lubrication retainers
Prevents the intrusion of tiny powders of less than 30 μm
・Lubrication ...
|
|
Japan SMC Thin Cylinder, Air Saving Type/Polygon Piston Square Cylinder CDQ2B-X3205
The built-in exhaust gas recovery circuit and polygonal piston make it compact and lightweight
・Air consumption: Up to 46% reduction
・Air from the press-out side is diverted to the suction side for air reuse
(Built-in exhaust recovery circuit)
・Air saving can be achieved by piping alone
・Small( ...
|
|
Japan SMC_CXSM10-20 Pneumatic Guide Cylinder S Double Rod Cylinder Amplitude
CXSM10-20 Introduction: SMC Pneumatic Guide Rod Cylinder CXSM Series CXSM10-20
Japan SMC_CXSM10-20 photo show
Model features introduced
SMCCXS twin rod cylinder amplitude
SMC Twin Rod Cylinder with Plain Bearing (Type CXSM) or Ball Bearing Slide (Type CXSL) for ...
|
|
Japan SMC cylinder CA2KW
Mass ** reduced by 15%.
Easy air cushioning control.
・It can be installed from small magnetic switches to highly magnetic-resistant switches.
・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately).
・With magnetic switch (CDA2 series: CDA2, C...
|
|
Japan SMC dust-resistant cylinder MXQ-XC4A
It is suitable for use in the environment with ceramic powder, toner powder, paper powder, metal powder (except welding slag) and other powder particle size of 20-50μm
・More than 4 times the durability (compared to standard products)
The guide rod part and the end cover part of the rod side are equipped with lubrication retainer to prevent powder and foreign matter from entering
・Outline ...
|
|
Japan SMC free-mount cylinder ZCUK
Space-saving cylinders that can be mounted directly on multiple sides.
・With magnetic switch (CDU series: CDU, CDUW, CDUK, CDUKW, CDU-A, ZCDUK)
Model: Vacuum
Mode of action: double action with single rod
Bore inner diameter (mm): 10,16,20,25,32
76 Science and Technology Institute ...
|
|
Japan SMC_AM150C-F02D-T Fiberglass Moisture Separator G1/4 Port
AM150C-F02D-T Introduction: SMC AM Series 300 L/min Fiberglass Moisture Separator AM150C-F02D-T, G 1/4 port, +5 → +60°C
Japan SMC_AM150C-F02D-T
Model features introduced
AM0.3 micron oil mist separator
Can be combined with other ...
|
|
Japan SMC_CG-L020 Axial Foot for 20mm drilling
CG-L020 Introduction: SMC CG Series Axial Leg CG-L020, suitable for 20mm drilling
Japan SMC_CG-L020 Picture show
Model features introduced
CG1 mounting feet
(Available in pairs)
Model parameters are introduced
All suppliers of 76 Technology have been strictly audited to ensure that ...
|
|
Japan SMC cylinder CG1/CDG1
Standardization of internal threads at the front end of the rod.
・Magnetic switch operability is improved and position adjustment is easier.
・A model without trunnion mounting holes has been added to the basic model.
・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately).
・With magnetic ...
|
|
Japan SMC cylinder MBB
By changing the shape of the cylinder head, the mass of the cylinder head was reduced by 10%.
Models with rod end metal mounts and oscillating metal mounts have been added (no need to be separately equipped).
・With magnetic switch (MDB-Z series: MDB, MDBW, MDBK, MDBKW, MDBB, MDB□Q)
How to move ...
|
|