Japan SMC Sanitary Cylinder HY□/HYD□

Neutralize the "eccentricity" or "insufficient parallelism accuracy" of the cylinder. So that the pivot does not need to coincide. Model: Standard type Applicable bore (mm): 180,200 All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. Our self-...

By changing the shape of the cylinder head, the maximum mass has been reduced by 10%. ・Added a model with a metal mount at the rod end and a swing metal mount (no need to equip it separately). ・With magnetic switch (MDB-Z series: MDB, MDBW, MDBK, MDBKW, MDBB, MDB□Q) Action side ...

CM2-XC4□ New has been added ・Durability in dusty environments is 6 times that of standard products Corresponding to powder with particle size of 20-100μm Compatible with ceramic powder, toner, paper powder, and metal powder *Welding slag is excluded ・You can choose according to your application The piston rod part is equipped with a lubrication retainer (lubrication retention ...

Metal mounts with both feet and rodless side flanges have been added. ・Magnetic switch operability is improved and position adjustment is easier. ・Magnetic switch track mounting type has been added. ・Added models with rod end metal mounts and swing metal mounts (no need to equip them separately) ・ ...

Standardization of 4 rail models. ・There is a wide variety of models, and you can choose according to the load quality and the required accuracy. Type: Plain bearing type How to act: Double acting Bore bore (mm): 16,20,25,32,40,50,63 All suppliers of 76 Technology ...

・Suitable for use in environments where fine powders such as ceramic powder, toner powder, paper powder, and metal powder (excluding welding slag for welding) float ・Durability improved by 4 times (for standard products) ・The rod side cylinder head is equipped with two lubrication retainers Prevents the intrusion of tiny powders of less than 30 μm ・Lubrication ...

CDG1BN32-25Z Introduction: SMC CDG1 Series Double Acting Pneumatic Fine Cylindrical Cylinder CDG1BN32-25Z, 25mm stroke, 1 MPa maximum operating pressure, 32mm bore diameter Japan SMC_CDG1BN32-25Z picture display Model features introduced CG1 cylinder SMCCG1 series is a fine...

The built-in exhaust gas recovery circuit and polygonal piston make it compact and lightweight ・Air consumption: Up to 46% reduction ・Air from the press-out side is diverted to the suction side for air reuse (Built-in exhaust recovery circuit) ・Air saving can be achieved by piping alone ・Small( ...

Compared to the CS1 cylinder series**, the weight is 65% lighter. With magnetic switch (CDS2 series: CDS2) Action mode: double action with single rod Bore bore (mm): 180, 200, 250 All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods are from manufacturers.

CDU20-20D Introduction: SMC CU Series 20mm Stroke Double Action Single Rod Pneumatic Multi-Mounting Cylinder CDU20-20D, 20mm Bore Diameter, 0.7 MPa Max Operating Pressure Japan SMC_CDU20-20D picture display Model features introduced CU series cylinders The series of CU free installation ...

Cylinder CJ2 Compact CJ2-X3175 Compact and lightweight Up to 25% reduction in overall length Up to 27% weight reduction ・A new rail-type magnetic switch mount Compatible with D-M9 □ (can be installed directly) ・The specifications are the same as those of the current CJ2 series Format: Standard type How to move: ...

CDQ2B32-10DCZ Introduction: SMC CQ2 Series 10mm Stroke Double Acting Single Rod Pneumatic Compact Cylinder CDQ2B32-10DCZ, 32mm bore, 50 x 45 x 45mm Japan SMC_CDQ2B32-10DCZ picture display Model features introduced CQ2 series compact cylinders Tight...

SS5Y7-20-04-00F Introduction: SMC SS5Y Series 4-End G 1/4 Thread Manifold SS5Y7-20-04-00F Japan SMC_SS5Y7-20-04-00F photo show Model features introduced The solenoid valve series SY7020 is assembled online The unit is assembled or installed on a connecting rod. Clip-on ...

CM2-XC4□ New has been added ・Durability in dusty environments is 6 times that of standard products Corresponding to powder with particle size of 20-100μm Compatible with ceramic powder, toner, paper powder, and metal powder *Welding slag is excluded ・You can choose according to your application The piston rod part is equipped with a lubrication retainer (lubrication retention ...

CD55B50-80M Introduction: SMC C55 Series 1 MPa 80mm Stroke Double Acting Single Rod Pneumatic Compact Cylinder CD55B50-80M, 50mm bore, 133 x 64 x 64mm Japan SMC_CD55B50-80M picture display Model features introduced ISO compact C55 cylinder ISO ...

This space-saving cylinder with a shortened overall length is suitable for compact devices. ・Small magnetic switches can be installed on all 4 sides (2 sides from ø12 to ø25). ・The magnetic switch does not protrude. ・Lightweight: 5-13% reduction (compared to the conventional CQ2) ・Added double earrings for safety ...

Introduction to the MXS16-100: SMC MXS Series 100mm Stroke Double Action Sliding Unit Actuator MXS16-100, 16mm Bore, Rubber Cushioned, 210 x 62 x 40mm Japan SMC_MXS16-100 picture display Model features introduced Pneumatic slide series MXS ...

CDQ2B50TF-10DZ Introduction: SMC CQ2 Series 1 MPa 10mm Stroke Double Acting Single Rod Pneumatic Compact Cylinder CDQ2B50TF-10DZ, 50mm bore, 48.5 x 71 x 64mm Japan SMC_CDQ2B50TF-10DZ picture display Model features introduced cylinder Compact ...

CXSM20-90 Introduction: SMC Pneumatic Guide Rod Cylinder CXS Series CXSM20-90 Japan SMC_CXSM20-90 picture show Model features introduced SMCCXS twin rod cylinder amplitude SMC Twin Rod Cylinder with Plain Bearing (Type CXSM) or Ball Bearing Slide (Type CXSL) for ...

With the new technology, the durability has been increased by more than 4 times Reduce the number of maintenances ・The specifications and dimensions are the same as those of the previous product (CQ2 series of compact cylinders). Mode of action: double action with single rod Cylinder bore bore (mm): 12, 16, 20, 25, 32, 40 All suppliers of 76 Technology ...