Introduction: The Rosemount 68Q hygienic temperature sensor is an industry-standard thermal resistance (RTD) sensor. This sensor provides flexible, reliable temperature measurement in hygienic process environments for the food, beverage, pharmaceutical, and life Rosemount/Rosemount temperature sensor 68Q scientific industries. The RTD is available in an easy-to-install Tri Clamp® hygienic end cap configuration, and its corrosion-resistant process connections are suitable for clean-in-place (CIP) and dead-space-free measurement applications.
Features:
Designed for use in hygienic process environments to meet the needs of the food, beverage, pharmaceutical, and life sciences industries
Tri Clamp end caps are available in immersion lengths of 25.4 to 241.3 mm (1.0 to 9.5 in) for easy installation
It can withstand a temperature range of –50 to 200 °C (-58 to 392 °F) and is extremely durable
Corrosion-resistant process connections for clean-in-place (CIP) and dead-space-free measurement applications
The surface treatment of the sensor and stainless steel fittings meets the 3-A® standard for reliable performance
A variety of housing and connector options are available for flexible applications
The sensor cassette is welded to the 316 SST sanitary end cap/rod assembly for greater stability
Using the Callendar-Van Dusen constant to determine calibration timing improves overall sensor performance and accuracy
Electropolished wetted parts are available to meet specific surface treatment requirements
Product parameters
Accuracy: Class B
Temperature range: -50 to 200°C (-58 to 392°F)
Time Constant/Response: Tri Clamp tubing OD size of 1 inch and above: 63.2% sensor response less than 3.5 seconds; Tri Clamp tubing OD sizes from 1/2 to 3/4 inch: up to 63.2% Sensor response in less than 1.5 seconds; Please refer to the full specifications for details
Stability: Tri Clamp tubing O.D. sizes 1/2 to 3/4 inch: Maximum freezing resistance offset of ±0.08% after 1000 hours at a maximum specified temperature of 200 °C (392 °F)
Leads: Tri Clamp Tubing O.D. sizes 1 inch and above: Maximum freezing resistance offset of ±0.04% after 1000 hours at the maximum specified temperature of 200 °C (392 °F)
Insulation resistance: When measured at 100 Vdc and room temperature, the minimum insulation resistance is 500 x 10^6 ohm
Calibration Options: Customer-specified calibration points or schedules; Callendar-Van Dusen constants are used to determine the calibration schedule
This article introduces the Rosemount/Rosemount Temperature Sensor 68Q Outer Diameter Size 1 inch product, if you are interested in Rosemount/Rosemount Sensor, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
|
More on that
|
Rosemount/Rosemount Flanged Electromagnetic Flowmeter Sensor 8705005
Introduction: The Rosemount 8705 Flanged Electromagnetic Flowmeter Sensor delivers long-lasting, reliable performance in even the most demanding applications. The all-welded construction provides complete hermetic tightness and protection from moisture and other contaminants. Even in the harshest environments, the sealed enclosure prevents ...
|
|
Rosemount/Rosemount Temperature Sensor 185 Insulation Resistance 1000MΩ
Introduction: The Rosemount 185 thermocouple temperature sensor meets the process temperature measurement standards you need. Covering a wide temperature range and with or without thermowellings, this reliable sensor is available in type J, K or N thermocouples (IEC 584 Class 1) to meet a wide range of applications.
|
|
Rosemount/Rosemount Flow Meter 8800DF005 with a turndown ratio of 38:01:00
Summary: The Rosemount 8800 Series vortex flow meters offer world-class stability with a gasket-free, non-clogging gauge body that eliminates potential leak points, maximizes process availability, and reduces unplanned process downtime. The Emerson Rosemount 8800 Vortex Flow Meter is uniquely designed ...
|
|
Rosemount/Rosemount Orifice Flowmeter 3051SFP All-in-One
Introduction: The Rosemount 3051SFP All-in-One Orifice Flow Meter is a superior multivariable device that includes a customized, all-in-one orifice primary element. This flow meter operating assembly is easy to install and is designed to facilitate the use of small line sizes (0.5-1.5 in. or 15-40 mm).
|
|
Rosemount/Rosemount Oxygen Analyzer 6888A In-Line
Introduction: The Rosemount 6888 In-Line Oxygen Analyzer continuously and accurately measures the amount of oxygen in the flue gas of any combustion process. Accurate measurement of residual oxygen is critical to combustion reactions, reducing energy costs, improving safety, and reducing emissions. Rugged oxygen sensors as well as ...
|
|
Rosemount/Rosemount Conductivity Sensor 400VP Contact
Summary: With the Rosemount 400VP General Purpose Contact Conductivity Sensor, you will be able to accurately measure electrolytic conductivity in a wide range of applications, from high-purity water to cooled purified water. The Rosemount 400 sensor is ideal for applications where clean, non-corrosive and conductivity below 20,000 μS/...
|
|
Rosemount/Rosemount Compact Temperature Sensor 1067 3mm diameter
Introduction: The Rosemount 1067 compact temperature sensor uses a variety of industry-standard sensing technologies, including thermal resistance (RTD) and thermocouples. For optimized efficiency and greater measurement reliability, the sensor is available in both single-element and two-element configurations. The RTD ...
|
|
Rosemount/Rosemount Flow Meter 3051SFA Repeatability ± 0.1 %
Introduction: Equipped with a patented average velocity pitot tube, the Rosemount 3051SFA Annubar flow meter is an advanced solution that provides superior measurement accuracy over a wide flow range. The flow meter can measure multiple variables and is equipped with an all-in-one ...
|
|
Rosemount/Rosemount Temperature Sensor 214C 24AWG Leads
Introduction: The Rosemount 214C RTD temperature sensor is available in either a Pt-100 single-element or a two-element RTD covering a temperature range from -196 to 600°C (-321 to 1112°F). This sensor is a special solution with a thin film and wirewound ...
|
|
Rosemount/Rosemount temperature sensor 214C with a response time of 10.8s
Introduction: The Rosemount 214C RTD temperature sensor is available in either a Pt-100 single-element or a two-element RTD covering a temperature range from -196 to 600°C (-321 to 1112°F). This sensor is a special solution with a thin film and wirewound ...
|
|
Rosemount/Rosemount Thermoresistive Temperature Sensor 65 Seismic Resistant
Summary: As an industry-standard PT-100 RTD sensor, the Rosemount 65 RTD temperature sensor is a single-element or two-element device designed to the IEC 751 standard to cover a wide range of temperatures. The sensor is vibration-resistant, and the junction box ...
|
|
Rosemount/Rosemount Level Switch 2120 Media density 37.5lb/ft3
Introduction: The Rosemount 2120 level switch provides easy installation and reliable level detection and control. It is certified for safety and hygiene by a third-party IEC61508 (SIL2) and can be exported optionally for a wide range of applications. It has no moving parts, does not require calibration, and is virtually untouched.
|
|
Rosemount/Rosemount 3900 General Purpose pH/ORP Sensor
Summary: The dual hydraulic reference ratio of the Rosemount 3900 pH/ORP combo sensor helps increase the sensor's resistance to harsh environments and extend sensor lifetime. The double liquid connection prevents the reference element from being contaminated by toxic ions such as ammonia, chlorine, cyanide and sulfide in the process. Two...
|
|
Rosemount/Rosemount Clamp Temperature Sensor 0085 3G Shock Resistant
Description: Available in a variety of clamp sizes and materials, the Rosemount 85 Clamp Temperature Sensor can be mounted in any position to provide a surface temperature measurement solution that can accommodate a wide range of temperatures. This platinum RTD sensor is available with silver or nickel plated nipples and ...
|
|
The Rosemount/Rosemount Heating Analyzer NGA 2000 weighs 10.7 kg
Description: The NGA 2000 WCLD analysis module is a stand-alone unit that is fully equipped with sample conversion, detection and associated electronics. The modular design is easy to integrate into the system, with good scalability and flexibility. The WCLD module combines an input/output (I/O) module and a platform, ...
|
|
Rosemount/Rosemount General Purpose Sensor 385+ pH range 0 to 14
Description: The Rosemount 385 extractable pH/ORP sensor meets the needs of a wide range of industrial applications. This product is designed for applications where it is not possible to stop the process and where it is difficult or impossible to obtain a separate sample stream. The 385 body is manufactured using standard titanium tubing and Tefzel, making the sensor usable for ...
|
|
Rosemount/Rosemount Controller 3491 input: 4-20 mA
Summary: The Rosemount 3491 controller provides control capabilities for any 4–20mA or HART-compatible transmitter. The backlit display clearly displays the measured values as well as the status of all inputs and outputs. Product development is customer-centric and takes advantage of an easy-to-navigate menu structure as well as ...
|
|
Rosemount/Rosemount Compact Adjustable Orifice Flowmeter 3051SFC
Introduction: The Rosemount 3051SFC Compact Regulated Orifice Flowmeter is an excellent solution for multivariable measurements, allowing direct measurement of differential, static, and process temperature variables simultaneously. The meter is equipped with a patented 4-position adjustment orifice plate for precise measurements in turbulent environments. This hole ...
|
|
Rosemount/Rosemount Flow Meter 3051CFC Differential pressure up to 2.48 bar
Description: The Rosemount 3051CFC Compact Orifice Plate Flow Meter is an industry-leading flow meter with a compact orifice plate that provides accurate flow measurement. The flow meter has been leak tested and calibrated to reduce leak points and enhance process control. The orifice plate is available in a variety of gauge ...
|
|
Rosemount/Rosemount Flow Meter 3051CFA Line sizes 2 to 96in
Description: The Rosemount 3051CFA Annubar flow meter is an industry-leading flow measurement solution that uses a patented T-shaped average pitot tube to provide reliable accuracy over a wide flow range. Its patented sensor keeps the size small in the pipe, reducing the permanent ...
|
|
Contact
working hours
