Introduction: Equipped with a patented average velocity pitot tube, the Rosemount 3051SFA Annubar flow meter is an advanced solution that provides superior measurement accuracy over a wide flow range. The flow meter can measure multiple variables and is equipped with an integrated thermowell for temperature measurement. Its patented T-shaped sensor is able to obtain measurements through a single pipe hole while maintaining a small size in the pipe, reducing permanent pressure loss and saving energy consumption.
Features:
With built-in flow calculations, fully compensated mass flow can be reported directly
The patented T-sensor establishes a fixed shunt point to improve differential pressure signal over a wider flow range
Advanced diagnostics to detect abnormal process conditions and electrical circuit problems through comprehensive diagnostics
The combination of Callendar-Van Dusen sensors improves temperature measurement accuracy and enables best-in-class flow calculations
Ultra for Flow performance level optimizes flow measurement with ±0.04% readability
The T-shaped Annubar design ensures minimal long-term pressure loss
The integrated thermowell sensor adds to the process temperature measurement without the need for additional tubing
The all-welded SuperModule™ is designed to provide industry-leading accuracy in harsh environments and applications
The flow meter is fully configured and leak tested and can be installed quickly right out of the box
The sensor stagnation zone reduces noise, reduces measurement errors, and avoids particle clogging
SIL 2/3 certification based on IEC 61508 (via a third party) and FMEDA data pre-use certification for safe installations
Product parameters
Fully Integrated Flow Meter: Rosemount 3051SFA, Measurement Type 1-4
Precision:
• Mass flow rate up to 0.8% of mass flow rate with a turndown ratio of 14:1
• Classic MV type for ±0.85 % flow rate and 8:1 turndown ratio
Repeatability: ± 0.1 %
Output:
• 4-20mA signal based on HART® communication
• WirelessHART with Smart Wireless THUM Adapter
Long-term stability: Up to 15 years of stability
Diagnosis:
• User writable process temperature sensor limitations
• Output as sensor temperature
• Instant traffic verification
Pipe Size :
2 inches to 8 inches (50 to 200 mm) – sensor size 1
6 inches to 36 inches (150 to 900 mm) – sensor size 2
12" to 72" (300 to 1800 mm) – sensor size 3
Fully Integrated Flow Meter: Rosemount 3051SFA, Measurement Type D
Precision:
• Volumetric flow rates of up to 0.8% of volumetric flow rates with a turndown ratio of 14:1
• Classic MV model with a volume flow rate of ±.85 % and a turndown ratio of 8:1
Repeatability: ± 0.1 %
Output:
• 4-20mA signal based on HART® communication
•WirelessHART
• FOUNDATION™ fieldbus
Long-term stability: Up to 15 years of stability
Diagnosis:
Advanced HART Diagnostic Suite
Pipe Size :
2 inches to 8 inches (50 to 200 mm) – sensor size 1
6 inches to 36 inches (150 to 900 mm) – sensor size 2
12" to 72" (300 to 1800 mm) – sensor size 3
This article introduces the Rosemount/Rosemount Flow Meter 3051SFA Repeatability ± 0.1 % product, if you are interested in Rosemount/Rosemount Flow Meter, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
|
More on that
|
Rosemount/Rosemount Oxygen Analyzer 6888A In-Line
Introduction: The Rosemount 6888 In-Line Oxygen Analyzer continuously and accurately measures the amount of oxygen in the flue gas of any combustion process. Accurate measurement of residual oxygen is critical to combustion reactions, reducing energy costs, improving safety, and reducing emissions. Rugged oxygen sensors as well as ...
|
|
Rosemount/Rosemount Compact Adjustable Orifice Flowmeter 3051SFC
Introduction: The Rosemount 3051SFC Compact Regulated Orifice Flowmeter is an excellent solution for multivariable measurements, allowing direct measurement of differential, static, and process temperature variables simultaneously. The meter is equipped with a patented 4-position adjustment orifice plate for precise measurements in turbulent environments. This hole ...
|
|
Rosemount/Rosemount Compact Temperature Sensor 1067 3mm diameter
Introduction: The Rosemount 1067 compact temperature sensor uses a variety of industry-standard sensing technologies, including thermal resistance (RTD) and thermocouples. For optimized efficiency and greater measurement reliability, the sensor is available in both single-element and two-element configurations. The RTD ...
|
|
Rosemount/Rosemount Flow Meter 3051CFC Differential pressure up to 2.48 bar
Description: The Rosemount 3051CFC Compact Orifice Plate Flow Meter is an industry-leading flow meter with a compact orifice plate that provides accurate flow measurement. The flow meter has been leak tested and calibrated to reduce leak points and enhance process control. The orifice plate is available in a variety of gauge ...
|
|
Rosemount/Rosemount Orifice Flowmeter 3051SFP All-in-One
Introduction: The Rosemount 3051SFP All-in-One Orifice Flow Meter is a superior multivariable device that includes a customized, all-in-one orifice primary element. This flow meter operating assembly is easy to install and is designed to facilitate the use of small line sizes (0.5-1.5 in. or 15-40 mm).
|
|
Rosemount/Rosemount Flanged Electromagnetic Flowmeter Sensor 8705005
Introduction: The Rosemount 8705 Flanged Electromagnetic Flowmeter Sensor delivers long-lasting, reliable performance in even the most demanding applications. The all-welded construction provides complete hermetic tightness and protection from moisture and other contaminants. Even in the harshest environments, the sealed enclosure prevents ...
|
|
Rosemount/Rosemount Temperature Sensor 185 Insulation Resistance 1000MΩ
Introduction: The Rosemount 185 thermocouple temperature sensor meets the process temperature measurement standards you need. Covering a wide temperature range and with or without thermowellings, this reliable sensor is available in type J, K or N thermocouples (IEC 584 Class 1) to meet a wide range of applications.
|
|
Rosemount/Rosemount Flow Meter 8800DF005 with a turndown ratio of 38:01:00
Summary: The Rosemount 8800 Series vortex flow meters offer world-class stability with a gasket-free, non-clogging gauge body that eliminates potential leak points, maximizes process availability, and reduces unplanned process downtime. The Emerson Rosemount 8800 Vortex Flow Meter is uniquely designed ...
|
|
Rosemount/Rosemount General Purpose Sensor 385+ pH range 0 to 14
Description: The Rosemount 385 extractable pH/ORP sensor meets the needs of a wide range of industrial applications. This product is designed for applications where it is not possible to stop the process and where it is difficult or impossible to obtain a separate sample stream. The 385 body is manufactured using standard titanium tubing and Tefzel, making the sensor usable for ...
|
|
Rosemount/Rosemount Temperature Sensor 214C 24AWG Leads
Introduction: The Rosemount 214C RTD temperature sensor is available in either a Pt-100 single-element or a two-element RTD covering a temperature range from -196 to 600°C (-321 to 1112°F). This sensor is a special solution with a thin film and wirewound ...
|
|
Rosemount/Rosemount Flow Meter 3051CFA Line sizes 2 to 96in
Description: The Rosemount 3051CFA Annubar flow meter is an industry-leading flow measurement solution that uses a patented T-shaped average pitot tube to provide reliable accuracy over a wide flow range. Its patented sensor keeps the size small in the pipe, reducing the permanent ...
|
|
Rosemount/Rosemount Temperature Sensor 68Q O.D. Size 1 inch
Introduction: The Rosemount 68Q hygienic temperature sensor is an industry-standard thermal resistance (RTD) sensor. This sensor provides flexible and reliable temperature measurement in hygienic process environments for food, beverage and pharmaceutical, and life cycles.
|
|
Rosemount/Rosemount temperature sensor 214C with a response time of 10.8s
Introduction: The Rosemount 214C RTD temperature sensor is available in either a Pt-100 single-element or a two-element RTD covering a temperature range from -196 to 600°C (-321 to 1112°F). This sensor is a special solution with a thin film and wirewound ...
|
|
Rosemount/Rosemount 3900 General Purpose pH/ORP Sensor
Summary: The dual hydraulic reference ratio of the Rosemount 3900 pH/ORP combo sensor helps increase the sensor's resistance to harsh environments and extend sensor lifetime. The double liquid connection prevents the reference element from being contaminated by toxic ions such as ammonia, chlorine, cyanide and sulfide in the process. Two...
|
|
Rosemount/Rosemount Conductivity Sensor 400VP Contact
Summary: With the Rosemount 400VP General Purpose Contact Conductivity Sensor, you will be able to accurately measure electrolytic conductivity in a wide range of applications, from high-purity water to cooled purified water. The Rosemount 400 sensor is ideal for applications where clean, non-corrosive and conductivity below 20,000 μS/...
|
|
Rosemount/Rosemount Clamp Temperature Sensor 0085 3G Shock Resistant
Description: Available in a variety of clamp sizes and materials, the Rosemount 85 Clamp Temperature Sensor can be mounted in any position to provide a surface temperature measurement solution that can accommodate a wide range of temperatures. This platinum RTD sensor is available with silver or nickel plated nipples and ...
|
|
Rosemount/Rosemount Temperature Sensor 214A Insulation Resistance 1000MΩ
Introduction: The Rosemount 214A temperature sensor provides a simple solution for thermocouples and RTDs that require special design. The 214A can be tailored to your specific connection type, sheath size, cabling requirements, and more! Get the accurate information you need for your system, including surface-mount sensing ...
|
|
Rosemount/Rosemount Thermoresistive Temperature Sensor 65 Seismic Resistant
Summary: As an industry-standard PT-100 RTD sensor, the Rosemount 65 RTD temperature sensor is a single-element or two-element device designed to the IEC 751 standard to cover a wide range of temperatures. The sensor is vibration-resistant, and the junction box ...
|
|
Rosemount/Rosemount Level Switch 2120 Media density 37.5lb/ft3
Introduction: The Rosemount 2120 level switch provides easy installation and reliable level detection and control. It is certified for safety and hygiene by a third-party IEC61508 (SIL2) and can be exported optionally for a wide range of applications. It has no moving parts, does not require calibration, and is virtually untouched.
|
|
The Rosemount/Rosemount Heating Analyzer NGA 2000 weighs 10.7 kg
Description: The NGA 2000 WCLD analysis module is a stand-alone unit that is fully equipped with sample conversion, detection and associated electronics. The modular design is easy to integrate into the system, with good scalability and flexibility. The WCLD module combines an input/output (I/O) module and a platform, ...
|
|
Contact
working hours
