Rexroth/Rexroth 12 inch monitor VDP16 LED 30.5 cm/12 in

Features: Convenient assembly case system 6 types of attachments Self-adjusting and adjustable end position buffering Patented safety ventilation for easy and safe ventilation At the hydraulic cylinder head and the hydraulic cylinder base, the position of the pipe connection can be freely selected, so that ...

peculiarity Interface: G 1/4 Maximum operating pressure 310 bar (4495 psi) Flow rate up to 20 l/min (5 gpm) Structure size 4 　　parameter Product range classification: 3/2-way/position, switching valve Product family type: VS70 ...

Introduction: The HMS01 single-shaft inverter is powered by DC and generates a controlled AC output voltage with variable frequency amplitude through DC for running the motor. The unit is equipped with a single-axis control unit slot with various interfaces for connection to the automation environment and is suitable for encoder systems, safety technology ...

Product Introduction Suitable for variable speed drives Low noise and low pulsation levels High efficiency through gap compensation Suitable for 2 million load changes at maximum pressure, internal gear pump, size 6, pressure 250 bar, suitable for industrial and mobile applications, open circuit. Aluminum ...

Product Introduction Optimized for variable speed drives. Low noise pollution and low pulsation levels. High efficiency. There is no limit to load variation Cast iron housing Constant displacement internal gear pump For industrial applications with open-loop control loops With FKM seals 　　Give birth...

Product Introduction The A18VO is a variable displacement pump with an axial conical piston gyroper with an inclined shaft design for hydrostatic drive in an open circuit. Designed for demanding applications, the pump provides easy control of work equipment in commercial vehicles (e.g. large truck installations).

peculiarity A float switch is a switchgear operated by a float that moves liquidly. Two switch contacts 1. Specify a 165 mm switching point 2. Specify the switching point as 135 mm 　　parameter Connection diagram: M20 x 1.5 Maximum pressure ...

Product Introduction The A2FM is a fixed motor with an axial tapered piston gyratory body with an inclined shaft design for hydrostatic drives in open and closed circuits. On the axial plunger unit with an inclined shaft design, the plunger is arranged at an angle to the drive shaft. Plunger straight ...

Features: Small three-piston pump, self-priming, with valve control. Due to the use of hydrodynamic plain bearings, the service life is long Constant displacement radial piston pump For open-circuit industrial applications NBR seals Product parameters Brand: Rexroth ...

Product Introduction Radial piston motor MCR-F for wheel drive with displacement 160 ... 2150 cm³ with a torque output of 13600 Nm. 　　Product parameters Rear housing bracket Frame size 3 ... 15 Displacement 160 ... 2150 cm³ Most...

Introduction: The MKE series motors are specifically designed for use in production equipment that are susceptible to explosive mixtures of air and combustible gases, vapors, fog or dust. In a wide torque range of up to 190 Nm, a wide range of motor sizes with pressure-resistant housings are available. Needless to say, all ...

Product Introduction The A2FO is a fixed displacement pump with an axial tapered piston gyratory body in an inclined shaft design for hydrostatic drive in an open circuit. The flow rate is directly proportional to the transmission speed and displacement. The pump body is robust and durable, and has a long service life Available Nominal Names ...

Product Introduction: The HMV01 power supply unit generates a DC bus voltage from the supply voltage. Rectifier and rectifier/regeneration variants are included. The rectifier/regenerative variant also feeds regenerative energy back into the power grid, keeping the DC bus voltage at a constant level, independent of the supply voltage. According to...

Product Introduction Medium pressure pumps. Low noise pollution and low pulsation levels. Highly efficient. Suitable for industrial applications. Constant displacement, size 55 cm³, pressure 175 bar, clockwise rotation, 600-1800 rpm, SAE-B mounting flange. Vane fixed displacement pumps Use...

Product Introduction Platform G Fixed displacement Size 22 ... 45 Continuous pressure 250 bar Intermittent pressure 280 bar

Summary: The MSK series motors are distinguished by their wide power range and limited size increments. The high torque density of these synchronous servo motors contributes to a particularly compact design with a maximum torque of 495 Nm. ...

Introduction: The single-axis converter XCS in the ctrlX DRIVE portfolio generates a DC bus voltage from the supply voltage and converts it into an AC output voltage with variable frequency amplitude for the operation of servo motors. The DC bus voltage generated in the device can be used to supply other XMS uniaxial ...

Product Introduction Hydraulic cylinders of circular design that can be configured in-line with a piston rod on one side. Configuration-specific dimensional drawings and 3D data are automatically provided. Nominal pressure 250 bar, piston Ø 40 ... 320 mm, piston rod Ø 25...220 mm, stroke length up to 6000 mm ...

Product Introduction Suitable for medium-voltage motors integrated into mechanical gearboxes Size 10 ... 63 Nominal pressure 280 bar Maximum pressure 350 bar Open and closed circuits ...

Introduction: The MKE series motors are specifically designed for use in production equipment that are susceptible to explosive mixtures of air and combustible gases, vapors, fog or dust. In a wide torque range of up to 190 Nm, a wide range of motor sizes with pressure-resistant housings are available. Needless to say, all ...