Rexroth hydraulic cylinder CDH1 SERIE 3X KONFIG Maximum pressure: 250

Product Introduction The signal rise time is as short as < 1 ms for dynamic pressure control. All parts that come into contact with the medium are made of stainless steel. High measurement accuracy of < 0.5% FS. Excellent overload and burst behavior. Pressure sensor with analogue output 4 ... 20 mA, pressure range 0 ...

Product Introduction The A2FM is a fixed motor with an axial tapered piston gyratory body with an inclined shaft design for hydrostatic drives in open and closed circuits. On the axial plunger unit with an inclined shaft design, the plunger is arranged at an angle to the drive shaft. Plunger straight ...

Introduction: Rexroth/Rexroth CML75 Embedded PC Degree of protection: IP20, PROFIBUS and real-time Ethernet communication, CPU: Intel Atom E3827 DualCore, 1.75 GHz. 　　parameter CPU：Intel Atom E3827 DualCore，1.75 GHz ...

Introduction: The single-axis converter XCS in the ctrlX DRIVE portfolio generates a DC bus voltage from the supply voltage and converts it into an AC output voltage with variable frequency amplitude for the operation of servo motors. The DC bus voltage generated in the device can be used to supply other XMS uniaxial ...

Product Introduction Platform F Fixed displacement Size 8 ... 28 Continuous pressures up to 250 bar Intermittent pressures up to 280 bar

Product Introduction The A18VO is a variable displacement pump with an axial conical piston gyroper with an inclined shaft design for hydrostatic drive in an open circuit. Designed for demanding applications, the pump provides easy control of work equipment in commercial vehicles (e.g. large truck installations).

Summary: The MSK series motors are distinguished by their wide power range and limited size increments. The high torque density of these synchronous servo motors contributes to a particularly compact design with a maximum torque of 495 Nm. ...

Product Introduction Medium-voltage motor with two-point control Size 28 ... 85 Nominal pressure 280 bar Maximum pressure 350 bar Open and closed circuits

Summary: Practical one-cable connection, higher torque and reliable encoder technology: The new generation of MS2E motors offers maximum power and safety for a wide range of ATEX applications up to Group II and Group 3 in the field of dust and gases. The series ...

Product Introduction Optimized for variable speed drives. Low noise pollution and low pulsation levels. High efficiency. There is no limit to load variation Cast iron housing Constant displacement internal gear pump For industrial applications with open-loop control loops With FKM seals 　　Give birth...

Product Introduction In-line configurable tie-rod hydraulic cylinders with piston rod on one side and piston rod on both sides optionally. Configuration-specific dimensional drawings and 3D data are automatically provided. Nominal pressure 70 bar, piston diameter 25 ... 200 mm, piston rod Ø 12 ... 140 mm, stroke ...

Product Description: This compact operator panel makes it easy to control and visualize your machine. The superior widescreen TFT display provides a detailed display of a wide range of machine data. By using different models of resistive or capacitive touch screens, you can ...

Product Brief: High-resolution displays from the DR series are available in a variety of extended sizes. They allow precise operation via a capacitive ten-finger multi-touch screen. They can be installed both horizontally and vertically. The anti-reflective and chemically hardened front glass makes them not easily ...

Product Brief: A large number of scalable embedded control hardware flexibly extends centralized and distributed automation topologies. The system can be integrated with Sercos automation buses and other fieldbuses as well as Ethernet-based protocols. Safety features/expansion module options for easy expansion ...

Product Description: The IP20-rated S20 is a flexibly expandable I/O kit that enables the shortest cycle times and the highest accuracy and ensures real-time data flow between controls and peripherals – whether peripherals on a local XM controller, or ...

Product Introduction It is used to measure and display the pressure in the hydraulic system Pressure display bar / MPa A manometer is a pressure measuring instrument that is used to measure and display pressure in a hydraulic system Performed according to standard EN 837-2 Stainless steel housing 　　Products...

Product Introduction Product characteristics: cast iron Principle: Piston pump Drive mode: hydraulic Number of impellers: single stage Pump shaft position: side vertical type Flow rate: 28 Weight: 25 Specifications: Variable displacement open pump Usage: Pipeline pump ...

peculiarity With 3 pressure ranges, to meet different customer requirements and applications, due to the use of concave mounting flange, the structure is very space-saving, the power density is very high, the total efficiency is very high, the initial efficiency is high, and the optional integrated flushing, wide and firm 40 bend shaft design technology, bent shaft design. ...

Product Introduction Compact high-pressure pump with a small installation length Size 45 ... 125 Nominal pressure 400 bar Maximum pressure 450 bar Open circuit

Product Introduction Cycloidal pumps can be used in the low pressure range for cooling, filtration or lubrication circuits. With standard-compliant flange and shaft versions, they can be flexibly connected to Rexroth axial piston pumps, vane pumps or internal gear pumps. Features: Aluminum housing ...