Product description: The PH-sensor CPS11D-7BA21 analogue or Memosens digital sensor is suitable for standard applications in the process and environmental sector with stain-resistant PTFE diaphragm and optional built-in temperature sensor.
Technical parameters
| input | | Measure variables | pH | | temperature | | Measuring range | Type AA electrode (for water/sewage measurement): | | pH: 1...12 pH | | Temperature: -15... 80℃ (5...176 F) | | BA electrode (for process measurements, sterilizable): | | pH：0...14 pH | | Temperature: 0... 135 ℃(32...275 F) | | Temperature:° | | Be careful | | Please pay attention to the process operating conditions. | | Environmental conditions | | Ambient temperature | Be careful | | There is a risk of frost damage | | When the temperature is below -15°C, do not use the electrode. | | Storage temperature | 0...50℃ | | Ingress protection | IP 68: TOP68 connector, autoclavable up to 135°C | | Test conditions: 1m water column, 50°C, 168 h | | IP 68: Memosens connector | | Test conditions: 10m water column, 25°C, 45 days | | Process conditions | | Process temperature | Type AA: -15...80 °C | | BA type: 0... 135 ℃ | | Process pressure | 0...6 bar (0...87 psi) / 16 bar (232 psi)
( For CPS11-xBAxESA.)
CPS11D-7BAxx CPS11D-7BTxx) | | electrical conductivity | min. 50μS/cm | | Process connections | Pg 13.5 | | Certificates and certifications | | Explosion-proof certification (Ex) | CPS11 (TOP68) | | ATEX II 1G EEx ia IIC T3/T4/T6 | | F.M. Cl. I Div. 2, with Liquiline M CM42 | | The CPS11D is used with the Mycom S CPM153 transmitter | | ATEX II 1G EEx ia IIC T3/T4/T6 | | FM/CSA Cl. I Div. 2, 与Liquiline M CM42 | | For use with the Mycom S CPM153 transmitter | | Note! The explosion-proof (Ex) type Memosens digital electrodes have orange rings on their connectors. | | TUV certification | TOP68 connector | | Pressure capacity up to 16 bar, | | At least triple overvoltage safety protection | | Memosens fittings | | Pressure capacity up to 16 bar, | | At least triple overvoltage safety protection | CPS11D electromagnetic
Compatibility (EMC) | Interference emission and anti-jamming capabilities
Complies with EN 61326: 1997 / A1: 1998 |
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
E+H/Endershaus Conductive Limit Detection Single Rods Probe 11371
Introduction: E+H/Endershaus Conductive Limit Detection Single-rod Probe 11371, 11371 probe is used for limit detection of food liquids, such as milk, beer, juice, etc. The probe is made of corrosion-resistant insulating material with CIP/SIP function, making it ideal for use in the food industry.
Give birth...
|
|
E+H Electromagnetic Flowmeter Proline Promag 10H ±0.5%
Introduction: The E+H/Endershaus electromagnetic flowmeter Proline Promag 10H is used in a wide range of applications in the most demanding food, beverage and life sciences industries. Combined with the Promag 10 transmitter, which meets the basic application and is capable of direct integration, the Promag 10H offers precise ...
|
|
E+H/Endershaus Radar Measurement Micropilot FMR67 Maximum measuring distance 125m
Introduction: E+H/Endershaus radar measurement Micropilot FMR67, the first 80 GHz radar designed to comply with the IEC 61508 international functional safety standard.
Features:
The hardware and software are designed in accordance with the IEC 61508 standard, and the redundant structure ...
|
|
E+H/Endershaus digital ORP electrode Orbipore CPS92D degree of protection IP68
Introduction: E+H/Endershaus Digital ORP Sensor Orbipore CPS92D, Orbipore CPS92D is a digital pH sensor for the measurement of fibrous media, highly solid-containing media such as suspensions, easy-to-precipitate solutions and emulsions.
Features:
Open-cell diaphragm ...
|
|
E+H Proline Promass G100 Liquid error ±.10%
Description: The E+H/Endershaus mass flow meter Proline Promass G 100 enables safe and precise measurement of liquids and gases in high-pressure applications with pressures up to 350 bar (5080 psi). Simple and safe safety with safety diaphragm and threaded process connections.
|
|
E+H/Endershaus Protective Sleeve for Temperature Sensor TA541 Insertion depth 4 mm
Introduction: E+H/Endershaus Protective Sleeve for Temperature Sensors TA541, the device is a metal protective sleeve connected using a threaded or flange welding process. The thermometer connection uses a metric or male thread, the size of which depends on the diameter of the tube. A variety of flanges of common standards and materials are also available. In office ...
|
|
E+H/Endershaus digital conductivity sensor Memosens CLS15E
Introduction: E+H/Endershaus Digital conductivity sensors Memosens CLS15E, Memosens CLS15E conductivity sensors are particularly suitable for low conductivity measurements such as boiler feed water and chip cleaning. Even in hazardous areas, conductivity sensors reliably measure high-precision ...
|
|
E+H/Endershaus Pressure Sensor Deltapilot FMB53 Measurement accuracy standard: 0.2%
Description: E+H/Endershaus Pressure sensor Deltapilot FMB53 with Contite measuring cell, mainly used in the environmental industry, measures the level of liquids or slurry media in open or closed containers, independent of foam. Designed to meet IEC61508 standards and meet the requirements of SI...
|
|
E+H/Endershaus Ultrasonic Measurement of Travel Time Principle Prosonic FMU40
Introduction: E+H/Endershaus Ultrasonic Measurement Stroke Time Principle Prosonic FMU40, Prosonic FMU40 is suitable for non-contact level measurement of liquids, slurries and solid lumps as well as flow measurement in open channels or measuring weirs.
Features:
Four lines of plain text display, ...
|
|
E+H/Endershaus limit switch Liquiphant FTL41
Introduction: E+H/Endershaus Liquiphant FTL41 limit switches, more than 6 million Liquiphant limit switches have been successfully put into use worldwide.
Features:
One measuring system for all liquids. No mechanical moving parts, i.e. ...
|
|
E+H Proline Promass H 500 Liquid error ± 0.10%
Description: The E+H/Endershaus mass flow meter Proline Promass H 500 is a high-precision Promass H for applications that require maximum corrosion resistance and guarantees maximum safety for the measurement of chemically aggressive fluids. The Promass H 500 is equipped with an innovative split transmitter ...
|
|
E+H/Endershaus Capacitive Level Measurement Liquicap FMI51
Introduction: E+H/Endershaus Capacitive Level Measurement Liquicap FMI51, the Liquicap FMI51 is a fully insulated rod probe capable of level monitoring in a wide range of liquids, even in adherent-prone media and at very high temperatures.
Features:
Accord with...
|
|
E+H digital dissolved oxygen sensor Memosens COL37E is IP68 rated
Description: E+H/Endershaus digital dissolved oxygen sensor Memosens COL37E, fluorescence dissolved oxygen sensor Memosens COL37E is easy to operate and easy to maintain. Oxygen concentration measurements can be performed quickly with simple adjustments.
Features:
Zero Flow Type C Fluorescent Cap ...
|
|
E+H/Endershaus Guided wave radar measures travel time principle Levelflex FMP50
Introduction:E+H/Endershaus Guided Wave Radar Measurement Stroke Time Principle Levelflex FMP50, Levelflex FMP50 is a basic liquid measuring instrument, suitable for temperature, pressure or corrosion resistance requirements are not high requirements for measurement occasions, storage tanks and utilities and other basic applications.
|
|
E+H Proline Prosonic Flow 91W
Description: The E+H/Endershaus Ultrasonic Flow 91W strapped sensor is designed for flow measurement of water and wastewater. In combination with the cost-effective Prosonic Flow 91 transmitter with a button, the Prosonic Flow ...
|
|
E+H/Endershaus Ultrasonic Measurement of Travel Time Principle Prosonic FDU93
Introduction: E+H/Endershaus Ultrasonic Measurement Stroke Time Principle Prosonic FDU93, the FDU93 ultrasonic sensor is suitable for continuous, non-contact level measurement of liquids, slurries, sludges, powders and solid lumps, maintenance-free, and can also be used for flow measurement in open channels and measuring weirs.
|
|
E+H/Endershaus Hydrostatic Level Gauge Cerabar PMP21 Measurement accuracy 0.3%
Description: The E+H/Endershaus hydrostatic level gauge Cerabar PMP21 is the most cost-effective, ultra-compact pressure transmitter. With piezoresistive sensors, the absolute or gauge pressure measurement range is 400 mbar. 400 bar。 The PMP21 can be measured under the harsh operating conditions of the process industry, ...
|
|
E+H/Endershaus Radar measures travel time principle Micropilot FMR51
Introduction: E+H/Endershaus Radar Measurement Travel Time Principle Micropilot FMR51, Micropilot FMR51 is suitable for level measurement under extreme working conditions, such as high temperature and high pressure in the oil and gas and chemical industries.
Features:
Hardware and software ...
|
|
E+H/Endershaus thermocouple thermometer TEC420
Introduction: The E+H/Endershaus thermocouple thermometer TEC420 is a highly modular, rugged thermometer for almost all industry applications. Compatible with all common communication protocols, the head-mounted transmitter is ready-to-use, enhancing the measurement compared to directly connected sensors.
|
|
E+H/Endershaus Conductive Limit Detection Single Rods Probe 11375Z
Introduction: E+H/Endershaus Conductivity Limit Detection Single Pole Probe 11375Z, 11375Z Economical Probe can be used for limit level detection of a wide range of liquids in process and storage tanks.
Features:
For the measurement of high-temperature liquids (e.g. 100°C), a cooler is available
Probe lengths can be ...
|
|
Contact
working hours
