Product description: PUSH IN connection inductive loads: 1 NO contact, contact material: AgNi, wiring-optimized 24 V DC actuator version: output position (CC) for bridging and zero-potential connection, 1 normally open contact with high power inrush current (HC), contact material: AgSnO, unique multi-voltage input (24 V to 230 V AC/DC).
Dimensions and weight
net weight | 28.2 g | width | 6.4 mm | Width (inches) | 0.252 inch | deep | 87.8 mm | Depth (inches) | 3.457 inch | height | 89.4 mm | Height (inches) | 3.52 inch |
Control side
Protection circuits | Flywheel diode, reverse polarity protection | Pick-up/release voltage, typical | 16 V / 3 V DC | Pick-up/release current, typical | 7.5 mA / 1 mA DC | Replace the coil voltage of the relay | 24 V DC | The coil voltage of the replacement relay is different from the rated control voltage | not | Status display | Green LED | DC current rating | 11.5 mA | Rated power | 280 mW | Rated control voltage | 24 V DC ± 20 % |
Load side
Action Delay | ≤ 6ms | | Disconnect time-lapse | ≤ 16 ms | Maximum AC Switching Capacity (Resistive) | 1500 VA | Maximum switching voltage, DC | 250 V | Maximum DC switching capacity (resistive) | 144 W @ 24 V | Voltage drop at maximum load | ≤ 120 mV | Minimum switching power | 1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V | Minimum switching current | 5 mA | Inrush current | 20 / 20 ms | Leakage current | < 10 µA | Short-circuit protection | not | Load-side protection circuitry | Flywheel diode, reverse polarity protection | | Rated switching voltage | | Voltage type | alternating current | utmost | 250 V |
|
| Maximum switching frequency at rated load | 0.1 Hz |
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
Weidmuller relays DRL270730L continuous current 10A
Description:Weidmuller Relay DRL270730L,D-SERIES DRL, Relay, Number of contacts: 2, CO contact AgCdO, Rated control voltage: 230 V AC, Continuous current: 10 A, Plug connection (4.8 mm x 0.5 mm), Test button available: No ...
|
|
Weidmuller DRMKIT 24VAC 2CO L/D/PB
Description:Weidmuller DRMKIT 24VAC 2CO L/D/PB,D-SERIES DRM, Relay module, Number of contacts: 2, CO contact AgNi flash gold plating, Rated control voltage: 24 V AC, Continuous current: 10 A, Screw connection, Test press ...
|
|
Weidmuller Industrial Relays RCI424AB2 Current 8A
Product Introduction: RIDERSERIES RCI's space-saving miniature industrial relays have received many approvals and are only 16 mm wide for enhanced insulation between input and output. 2 converter contacts (16 A) and 2 converter contacts (8 A) with built-in LED, protection circuitry or ...
|
|
Weidmuller electromagnetic relay MCZ R 24VDC 1NO TRAK surge current 6A
Description:Weidmuller Electromagnetic relay MCZ R 24VDC 1NO TRAK,MCZ-SERIES TRAK, Relay module, Number of contacts: 1, NO contact AgSnO, Rated control voltage: 24V DC +25% / -30%, Continuous current: 6 A, Tension-clamp connection, Test ...
|
|
Weidmuller relays DRL373012L continuous current 10A
Description: Weidmuller Relays DRL373012L, D-SERIES DRL, Relay, Number of contacts: 3, CO contact AgSnO, Rated control voltage: 12 V DC, Continuous current: 10 A, Plug-in connection (4.8 mm x 0.5 mm), Test button available: No
...
|
|
Weidmuller relays DRH276012LT rated power 1.5W
Description:Weidmuller Relays DRH276012LT, D-SERIES DRW / DRH, Relay, Number of contacts: 2, NO contacts with interrupting magnet AgSnO, Rated control voltage: 12 V DC, Continuous current: 16 A, Plug-in connection (4.8 mm x 0.5 mm ...
|
|
Weidmuller relays DRG570012LT continuous current 6A
Description: Weidmuller Relay DRG570012LT, D-SERIES DRG, Relay, Number of contacts: 4, CO contact with test button, AgNi 90/10, Rated control voltage: 12 V DC, Continuous current: 6 A, Plug-in connection
Product parameters
...
|
|
Weidmuller single relay RCM570512 current 6 A
Product Introduction: The miniature industrial relays of the RIDERSERIES RCM have received many international approvals and are suitable for reliably increasing the number of contacts in a small space with a width of 27 mm. 4 converter contacts (12 A) and 3 converter contacts (10 A) and 4 converter contacts (6 A) with inner ...
|
|
Weidmuller relays DRL570730L continuous current 10A
Description:Weidmuller Relays DRL570730L,D-SERIES DRL, Relays, Number of contacts: 4, CO contact AgCdO, Rated control voltage: 230 V AC, Continuous current: 10 A, Plug connection (4.8 mm x 0.5 mm), Test button available: No ...
|
|
Weidmuller relays DRH173110LT rated at 1.5 W
Description:Weidmuller Relays DRH173110LT, D-SERIES DRW / DRH, Relay, Number of contacts: 1, NO contacts with interrupting magnet AgSnO, Rated control voltage: 110 V DC, Continuous current: 16 A, Plug connection (4.8 mm x 0.5 ...
|
|
Weidmuller DRIKITP 24VDC 1CO LD
Description: Weidmuller DRIKITP 24VDC 1CO LD, D-SERIES DRI, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 24 V DC, Continuous current: 10 A, PUSH IN, Test button available: No
...
|
|
Weidmuller relays DRM570730L width 21 mm
Description:Weidmuller Relay DRM570730L, D-SERIES DRM, Relay, Number of contacts: 4, CO contact, AgNi flash gold plating, Rated control voltage: 230 V AC, Continuous current: 5 A, Plug-in connection
Product parameters
We start with ...
|
|
Weidmuller Solid State Relay TRP 24-230VUC 1CO ED2 32g
Introduction:Weidmuller Solid State Relay TRP 24-230VUC 1CO ED2,TERMSERIES, Relay Module, Number of Contacts: 1, CO Contact AgNi, Rated Control Voltage: 24... 230 V UC ±10 %, continuous current: 6 A, PUSH IN, test button ...
|
|
Weidmuller DRMKIT 24VDC 2CO LD relay
Description:Weidmuller DRMKIT 24VDC 2CO LD,D-SERIES DRM, Relay module, Number of contacts: 2, CO contact AgNi flash gold plating, Rated control voltage: 24 V DC, Continuous current: 10 A, Screw connection, Test button ...
|
|
Weidmuller relays DRM270024LT rated control voltage 24VDC
Description: Weidmuller Relay DRM270024LT, D-SERIES DRM, Relay, Number of contacts: 2, CO contacts, AgNi flash gold plating, Rated control voltage: 24 V DC, Continuous current: 10 A, Plug-in connection
Product parameters
Firm...
|
|
Weidmuller relays DRR373048L rated at 1.5W
Description: Weidmuller Relay DRR373048L, D-SERIES DRR, Relay, Number of contacts: 3, CO contact AgSnO, Rated control voltage: 48 V DC, Continuous current: 10 A, Plug-in connection, Test button available: No
Product parameters
...
|
|
Weidmuller Solid State Relay TRP 230VAC RC 1CO 29.5g
Description: Weidmuller Solid State Relay TRP 230VAC RC 1CO, TERMSERIES, Relay module, Number of contacts: 1, CO contact AgNi, Rated control voltage: 230 V AC ±10 %, Continuous current: 6 A, PUSH IN, Test button available: No
...
|
|
Weidmuller RCMKITP-I 24VDC 4CO LD Net weight 96.45g
Description:Weidmuller RCMKITP-I 24VDC 4CO LD,RIDERSERIES RCM, Relay module, Number of contacts: 4, CO contact AgNi, Rated control voltage: 24 V DC, Continuous current: 6 A, PUSH IN, Test button available: Configurable ...
|
|
Weidmuller relays DRL270024L continuous current 10A
Description: Weidmuller Relay DRL270024L, D-SERIES DRL, Relay, Number of contacts: 2, CO contact AgCdO, Rated control voltage: 24 V DC, Continuous current: 10 A, Blade connection (4.8 mm x 0.5 mm), Test button available: No
...
|
|
Weidmuller DRM570024LT industrial relays
Product description: D series DRM relays: 2 or 4 changeover contacts Compact design Wide coil voltage range Test button selectable (AC red, DC blue) Optionally equipped with built-in status display (AC red, DC green) and/or freewheeling diode
Specifications:
Number of contacts: 4NO...
|
|
Contact
working hours
