INVT High Performance Closed-Loop Vector Inverter Goodrive35 ±0.02%

Product introduction: Goodrive35 inverter is derived from the new generation of GD300 inverter, with high control accuracy, high starting torque, high speed ratio and fast response closed-loop control performance, but also has spindle positioning, simple servo function, control accuracy up to 1 pulse, in some occasions can replace servo drive, for customers to achieve cost optimization.

INVT/INVT Goodrive35

Specifications:

Description of the function		Specifications
input	Input Voltage (V)	AC 3PH 380V(-15%)~440V(+10%) Rated voltage: 380V AC 3PH 520V(-15%)~690V(+10%) Rated voltage: 660V
input	Input Frequency (Hz)	50Hz/60Hz, allowable range 47~63Hz
output	Output Voltage (V)	0~Input voltage
output	Output Frequency (Hz)	0～400Hz
Technical control performance	Control mode	Space voltage vector control mode, no PG vector control mode, with PG vector control mode
	Motor type	Asynchronous motors, permanent magnet synchronous motors
	Speed ratio	Asynchronous machine 1:200 (SVC), synchronous machine 1:20 (SVC), 1:1000 (VC)
	Speed control accuracy	±0.2% (without PG vector control), ± 0.02% (with PG vector control)
	Fluctuations in speed	±0.3% (without PG vector control)
	Torque response	<20ms (without PG vector control), < 10ms (with PG vector control)
	Torque control accuracy	10% (without PG vector control), 5% (with PG vector control)
	Starting torque	Asynchronous motor: 0.25Hz/150% (no PG vector control)
		Permanent magnet synchronous motor: 2.5Hz/150% (without PG vector control)
		0Hz/200% (with PG vector control)
	Overload capacity	150% rated current for 60s;
		180% rated current for 10s;
		200% rated current for 1s.
Operational control performance	Frequency setting method	Digital setting, analog setting, pulse frequency setting, multi-speed operation setting, simplified Easy PLC setting, PID setting, MODBUS communication setting, PROFIBUS communication information settings, etc.
	Automatic voltage adjustment function	When the grid voltage changes, it can automatically keep the output voltage constant
	Fail-safe function	Provide more than 30 fault protection functions: over-current, over-voltage, under-voltage, over-temperature, phase loss, Protection functions such as overload
	Speed tracking restart function	Shock-free smooth start of rotating motors
	Speed tracking restart function	Note: This function is available for 4kW or more.
Peripheral interfaces	Resolution of terminal analog input quantity	Not more than 20mV
	Resolution of terminal switching input quantity	Not more than 2ms
	Analog inputs	2 channels (AI1, AI2) 0~10V/0~20mA, 1 channel (AI3) -10~10V
	Analog output	2 channels (AO1, AO2) 0~10V /0~20mA
	Digital inputs	8 normal inputs, maximum frequency 1kHz, internal impedance: 3.3kΩ;
	Digital inputs	1 high-speed input, maximum frequency 50kHz
	Digital output	1 high-speed pulse output, maximum frequency 50kHz;
	Digital output	1 Y-terminal open collector output
	Relay output	Two programmable relay outputs
		RO1A is normally open, RO1B is normally closed, and RO1C is common
		RO2A is normally open, RO2B is normally closed, and RO2C is common
		Contact capacity: 3A/AC250V, 1A/DC30V
Machine-specific features	The spindle stops on time	It is suitable for spindle positioning operation and control timing
	The spindle stops on time	Built-in 7 indexes and 4 zero positions
	Location reference point	Support external zero detection switch positioning
		Encoder Z-phase positioning is supported
	Servo controlled	Burst given: Position control at any position
	Crossover output	Encoder pulse division output (H1, H2 type inverter)
	Speed/position mode	Terminal switching is supported
	encoder	The C1 type inverter supports 100kHz, and the D1 type inverter supports 500kHz, H1 type
	encoder	The inverter supports 300kHz, and the H2 inverter supports 400kHz.
	Positioning performance	Support Z-pulse and photoelectric switch positioning, accurate positioning without overshoot
other	Installation:	It supports wall-mounted, floor-mounted, and flanged installation
	Operating ambient temperature	-10~50°C, derating above 40°C
	Mean time between failures	2 years (25°C ambient temperature)
	Ingress protection	IP20
	Cooling method	Forced air cooling
	Brake unit	380V 30kW (inclusive) or less, 380V 37kW (inclusive) or more optional external
	Brake unit	660V optional external
	EMC filters	380V built-in C3 filter: meets the requirements of IEC61800-3 C3 level
		660V without built-in C3 filter
		Optional external filter: meets the requirements of IEC61800-3 C2 class

The company has been with the concept of "customer first", quality and service to win the market, hoping to cooperate with all sectors of society, mutual benefit and win-win, create brilliance, and work together to create a better tomorrow! In line with the concept of honest service, the company welcomes new and old customers to inquire, on-site inspection, and negotiation business.

INVT High Performance Closed-Loop Vector Inverter Goodrive35 ±0.02%

Sections viewed

Contact

working hours