| project | content |
| Order product number | EX-32A |
| Model | EX-32A |
| Detection distance | 50mm |
Note: The detection distance and response are relative to the white matte paper (100x100mm). |
| Detect objects | Opaque, translucent, or hyaline |
| Deviation ( Hysteresis ) | 15% or less of the operating distance |
Note: The detection distance and response are relative to the white matte paper (100x100mm). |
| Repeatability (perpendicular to the detection axis) | 0.5mm or less |
| Supply voltage | 12~24V DC±10% pulsating P-P 10% or less |
| Current consumption | 13mA or less |
| output | NPN open-collector transistors |
・Maximum sink current: 50mA |
・Applied voltage: 30V DC or less (between output and 0V) |
・Residual voltage: 2 V or less (at 50 mA inflow current), 1 V or less (at 16 mA inflow current) |
| Output: Outputs the action | ON when light is entered |
| Output: Short-circuit protection | Equipped with |
| Reaction time | 0.5ms or less |
| Working status indicator | Orange LED (lights up when ON is output) |
| Stability indicator | Green LED (lights up when light is stable and not in light) |
| Sensitivity regulator | Equipped with a continuously variable regulator |
| Environmental resistance: Protective structure | IP67 (IEC), leak-proof type (JIS) |
| Environmental resistance: The ambient temperature at which it is used | -25~+55°C (note no condensation and freezing), -30~+70°C when storing |
| Environmental resistance: Ambient humidity is used | 35~85RH, 35~85RH when stored |
| Environmental resistance: The illumination of the use environment | Incandescent lamp: 3,000 Lx or less on the light-receiving surface |
| Environmental resistance: Withstand voltage | AC1,000V for 1 minute between all power connection terminals and housing |
| Environmental resistance: insulation resistance | A high-impedance meter based on 250 VDC between all power supply terminals and housings of 20 MΩ or more |
| Environmental resistance: Vibration resistance | Endurance 10~500Hz Double amplitude 3mm (MAX.20G) 2 hours each in X, Y and Z directions |
| Environmental resistance: impact resistance | Acceleration 500 m/s2 (approx. 50 G) 3 times each in the X, Y and Z directions |
| Projectors | Red LED (modulated) |
| Material | Housing: Zinc die-cast (nickel plated) |
Lens: Acrylic |
Cover: Polycarbonate |
| cable | 0.1mm2 3-core rubber cable, 2m long |
| Cable extension | The total length of the cable of 0.3 mm2 or more can be extended to 50 m |
| weight | Body weight: Approximately 20 g |
Package weight: about 45g |
| annex | Nut: 1 pc |
Tooth lock washer: 1 pc |
Contact
working hours
