Panasonic Cable Type Amplifier Digital Laser Sensor LS-501-C2

Panasonic Cable Type Amplifier Digital Laser Sensor LS-501-C2, NPN Open Collector Transistor Dual Output, Comes with 2m Rubber Cable (6 Cores) Cable Outer Diameter: ø4mm connection.
Panasonic Cable Type Amplifier Digital Laser Sensor LS-501-C2

project	content
Order product number	LS-501-C2
Model	LS-501-C2
Working status indicator	Orange LED (lights up at output 1 and output 2 ON)
Environmental resistance: Protective structure	IP40(IEC)
Environmental resistance: The ambient temperature at which it is used	-10~+55°C [-10~+50°C when 4~7 units are installed closely, -10~+45°C when 8~12 units are installed closely] (Note that condensation and freezing are not allowed), When storing: -20~+70°C
Environmental resistance: Ambient humidity is used	35~85%RH, when storing: 35~85%RH
Environmental resistance: Withstand voltage	AC1,000V for 1 minute between all power connection terminals and housing
Environmental resistance: insulation resistance	20MΩ or more, DC250V based on high impedance meter between all power supply terminals and housing
Environmental resistance: Vibration resistance	Frequency: 10~150Hz, Double amplitude: 0.75mm (max. 10G) 2 hours each in X, Y, and Z directions (no power)
Environmental resistance: impact resistance	Endurance: 98 m/s2 (approx. 10 G) 5 times in each direction of XYZ (no power-on)
Material	Body shell: Polycarbonate
	Hood: Polycarbonate
	Switch: Polyoxymethylene
cable	0.2mm2 6-core rubber insulated cable, 2m long
weight	Body weight: Approximately 75 g
weight	Package weight: about 110g
annex	FX-MB1 (amplifier protection seal): One set
Supply voltage	12~24V DC +10-15% pulsation P-P10% or less
power consumption	Normal operation: 1,200 mW or less (excluding 50 mA or less current consumption at 24 V supply voltage and monitoring current output)
power consumption	In ECO mode: 980 mW or less (40 mA or less at 24 V supply voltage, excluding monitoring current output)
Outputs (Output 1, Output 2)	NPN open-collector transistors
	・Maximum sink current: 50mA (Note)
	・Applied voltage: 30V DC or less (output between -0V)
	・Residual voltage: 2 V or less (under the condition of maximum inflow current)
	Note: 25mA when more than 5 units are connected in series. However, this does not apply for extension cables.
Output (Output 1, Output 2): Output action	ON when the light is in/ON when the light is not in
Output (Output 1, Output 2): Short-circuit protection	Equipped with
Detection output setting: output 1	Normal mode/differential mode/differential mode/window comparison mode
Detection output setting: Output 2	Normal mode/differential mode/differential mode/self-diagnostic output mode/electrical response output mode, output switching
Reaction time	H-SP: 60 μs or less, FAST: 150 μs or less, STD: 250 μs or less, LONG: 500 μs or less, U-LG: 5 ms or less, HYPR: 24 ms or less Switchable type
Monitor the current output	Output current: Approx. 4~20mA (H-SP, FAST, STD: 0~4,000 indication)
	Reaction time: less than 2ms
	Zero point: within 4mA±1% F.S
	Span: within 16mA±5% F.S
	Linearity: within ±3% F.S
	Load resistance: 0~250Ω
External inputs	NPN has no contact input
	・Signal conditions: High: +8V~+V DC or open, Low: 0~+2V DC (source current 0.5mA or less)
	・Input impedance: Approx. 10kΩ
External input function	Drop light stop/teach (fully automatic, limited, 2 points)/logic operation/copy function locking/display adjustment/database loading/database saving Switching
Laser flood light indicator	Colored LED (lights up when laser light is emitted)
Output selection indicator	Yellow LED (lights up when output is selected)
Digital display	Digital display Digital display 8-digit 7-segment (4-digit green LED + 4-digit red LED) mode display (yellow LED)/D・CUST・PRO
The amount of light entering the display range	H-SP/FAST/STD:0～4,000
The amount of light entering the display range	LONG/U-LG/HYPR:0～9,999
How to set the sensitivity	2-point teaching/limited teaching/automatic teaching/manual adjustment
Logical operations	Detect between output 1 and the operand: invalid /and/or/xor switching
Logical operations	Object: Detection output 2 / Tight to the upper amplifier (detection output 1) / External input switching
Timer function	<输出1>
	Off delay timer / On delay timer / One-touch timer / On · Off delay timer / On delay timer · One-touch timer
	Active/Invalid Timer Time is variable
	<输出2>
	Disconnect Delay Timer / Turn On Delay Timer / One-Touch Timer Active/
	Inactive switching timer time variable
Timer function: Timer time	Timer range "ms": Approx. 0.5 ms, approx. 1~9,999 ms, approx. 1 ms increments
	Timer range "sec": about 0.5s, about 1~32s, about 1s increments
	Timer range "1/10ms": Approx. 0.05ms, approx. 0.1~999.9ms, approx. 0.1ms Each output is set separately
Anti-jamming function	Equipped with
Anti-jamming function	Note: Number of units that can be installed closely: H-SP: 0 / FAST: 2 / STD, LONG, U-LG, HYPR: 4.
Cable extension	The total length of the cable over 0.3mm2 can be extended to 100m

76 Technology with quality assurance, with excellent reputation, so that you are comfortable in the purchase, rest assured in use, 76 Technology, need your trust and support.
Panasonic Cable Type Amplifier Digital Laser Sensor LS-501-C2, NPN Open Collector Transistor Dual Output, Comes with 2m Rubber Cable (6 Cores) Cable Outer Diameter: ø4mm connection. 76 Technology with quality assurance, with excellent reputation, so that you are comfortable in the purchase, rest assured in use, 76 Technology, need your trust and support.

Panasonic Cable Type Amplifier Digital Laser Sensor LS-501-C2

Sections viewed

Contact

working hours