Panasonic Digital Contrast Sensor The amplifier has a built-in LX-101

Panasonic Digital Contrast Sensor Amplifier built-in LX-101, ambient temperature, incandescent lamp: lumination of the receiving surface 3,000lx or less, frequency 10~500Hz, double amplitude 3.0mm
Panasonic Digital Contrast Sensor The amplifier has a built-in LX-101

Panasonic Digital Contrast Sensor The amplifier has a built-in LX-101

project	content
Order product number	LX-101
Model	LX-101
Detection distance	10±3mm
Spot size	1x5mm (set distance: 10mm)
Supply voltage	12~24V DC±10% pulsation P-P10% or less
Current consumption	Normal operation: 750 mW or less (at 24 V supply voltage, current consumption 30 mA or less)
Current consumption	ECO mode: 600 mW or less (24 V power supply voltage, 25 mA current consumption or less)
Output 1	NPN open-collector transistors
	・Maximum sink current: 50mA
	・Applied voltage: 30V DC or less (between output and 0V)
	・Residual voltage: 1.5 V or less (at 50 mA sink current)
Output 1: Short-circuit protection	Equipment (self-reset)
Output 1: Output action	In color mark mode: ON when light is in / ON when not in light (automatically set during teaching)
Output 1: Output action	In color mode: ON when consistent/ON when inconsistent (set during teaching)
Output 2	NPN open-collector transistors
	・Maximum sink current: 50mA
	・Applied voltage: 30V DC or less (between output and 0V)
	・Residual voltage: 1.5 V or less (at 50 mA sink current)
Output 2: Short-circuit protection	Equipment (self-reset)
Output 2: Output action	Output 1's reversal work
Reaction time	In color mark mode: 45μs or less
Reaction time	In color mode: 150μs or less
Teach input	NPN has no contact input
	・Signal condition: High... +5V~+V or Off, Low... 0~+2V (source current 0.5mA or less)
	・Input impedance: Approx. 10kΩ
Digital display	4-digit red LED display
How to set the sensitivity	In color scale mode: 2 points of teaching/fully automatic teaching
How to set the sensitivity	When in color mode: 1 point to teach
Set the sensitivity fine-tuning function	Equipped with
Timer function	Equipped with variable on/off delay timer and active/invalid conversion system (timing time: 1~500ms 9 stages variable)
Environmental resistance: Protective structure	IP67 (IEC), leak-proof type
Environmental resistance: The ambient temperature at which it is used	-10~+55°C (note no condensation and freezing), storage: -20~+70°C
Environmental resistance: Ambient humidity is used	35~85%RH, when stored: 35~85%RH
Environmental resistance: The illumination of the use environment	Incandescent lamp: 3,000 lx or less on the light-receiving surface
Environmental resistance: Withstand voltage	AC1,000V for 1 minute between all power connection terminals and housing
Environmental resistance: Vibration resistance	Frequency: 10~500Hz, double amplitude: 3.0mm(MAX.20G), 2 hours each in X, Y and Z directions
Environmental resistance: impact resistance	Acceleration 500 m/s2 (approx. 50 G) 3 times each in the X, Y and Z directions
Projectors	Red/Green/Blue Composite LED (Emission Peak Wavelength: 640nm/525nm/470nm)
Material	Shell: PBT
	Display cover: Polycarbonate
	Operation button: Silicone
	Lens: Glass
	Lens header: Aluminum
cable	0.34mm2 core rubber cable, 2m long
Cable extension	The total length of the cable of 0.3mm2 or more can be extended to 100m
weight	Body weight: Approximately 120 g
weight	Package weight: about 180g
annex	M4 screws with washers (length 30mm): 2 pcs

Panasonic Digital Contrast Sensor Amplifier built-in LX-101, ambient temperature, incandescent lamp: lumination of the receiving surface 3,000lx or less, frequency 10~500Hz, double amplitude 3.0mm. 76 Technology with quality assurance, with excellent reputation, so that you are comfortable in the purchase, rest assured in use, 76 Technology, need your trust and support.

Panasonic Digital Contrast Sensor The amplifier has a built-in LX-101

Sections viewed

Contact

working hours