| project | content |
| Order product number | EX-19SB-PN |
| Model | EX-19SB-PN |
| Detection distance | 1m |
| Minimal detection of objects | φ2.0mm opaque |
| Deviation ( Hysteresis ) | - |
| Repeatability (perpendicular to the detection axis) | 0.05mm or less |
| Supply voltage | 12~24V DC±10% pulsation P-P10% or less |
| Current consumption | Projector: 10mA or less |
Light receiver: 10mA or less |
| output | PNP open-collector transistors |
・Maximum outflow current: 50mA |
・Applied voltage: 30V DC or less (between output and +V) |
・Residual voltage: 2 V or less (outflow current 50 mA), 1 V or less (outflow current 16 mA) |
| Output: Short-circuit protection | Equipped with |
| Reaction time | 0.5ms or less |
| Working status indicator | Orange LED (lights up when ON is output) |
| Incoming light indicator | - |
| Stability indicator | Green LED (lights up when light is stable and not in light) |
| Environmental resistance: Protective structure | IP67(IEC) |
| Environmental resistance: The ambient temperature at which it is used | -25~+55°C (note that condensation and freezing are not allowed), storage: -30~+70°C |
| Environmental resistance: Ambient humidity is used | 35~85%RH, when storing: 35~85%RH |
| Environmental resistance: The illumination of the use environment | Incandescent lamp: The illumination of the light-receiving surface is 3,000 R or less |
| Environmental resistance: Withstand voltage | AC1,000V for 1 minute between all power connection terminals and housing |
| Environmental resistance: insulation resistance | A high-impedance meter based on 250 VDC between all power supply terminals and housings of 20 MΩ or more |
| Environmental resistance: Vibration resistance | Frequency: 10~500Hz, double amplitude: 3mm(MAX.20G), 2 hours each in the X, Y and Z directions |
| Environmental resistance: impact resistance | Endurance 500 m/s2 (approx. 50 G) 3 times in each direction of XYZ |
| Projectors | Red LED (Emission peak wavelength: 680nm, modulated type) |
| Material | Shell: Polyaryl ester |
Lens: Polyaryl ester |
| cable | 0.1mm2 3-core (beamer: 2-core) rubber cable, 2m long |
| Cable extension | The total length of the cable of 0.3 mm2 or more can be extended to 50 m (1 emitter and 1 light receiver) |
| weight | Body weight: Approximately 20 g of light emitters and light receivers each |
Package weight: about 50g |
| annex | Mounting screws: 1 set |
Contact
working hours
