|
EATON Overload Relay DILER-22 is rated at 3A
Product Brief for DILER-22: Surface Mount or DIN Rail Mount Maximum Voltage Rating 500V AC/250V DC Dimensions: H x W X D58 x 45 x 52 mm.
Eaton UPS:
Product technical parameters
The above is EATON/Eaton Overload Relay Diler ...
|
|
EATON Overload Relay DILA-22 2 Closed & 2 Disconnect Contacts
Product Brief of DILA-22: Series DILA Normal State Configuration 2 NO / 2 NC Number of Auxiliary Contacts 0 End Type Screw Length 45mm Depth 125.2mm Width 68mm.
Eaton Relays:
Product technical parameters
Above...
|
|
EATON Contactor & Thermal Overload Relay ZB32-6 Contact Current Rating 6 A
Product Brief for ZB32-6: Protects the motor from phase errors or overloads Short-circuit protection when connected directly to contacts Suitable for protection of ATEX motors Single-phase sensitivity according to IEC/EN 60947 When the overload relay is not directly mounted on the contactor or when using multiple...
|
|
EATON Direct Contactor Overload Relay ZB150-50
Product Brief for ZB150-50: FLC Motor Rating 35 → 50 A Control Voltage 500 V ac Contact Current Rating 50 A Contact Voltage Rating 1 kV AC Mounting Style Direct Contactor Series ZB Normal State Configuration Normally Open/Normally Closed.
Eaton Relays:
Give birth...
|
|
EATON Contactor Relay DILA-40 24V DC 4 Closed Contacts
Product Brief of DILA-40: Contact Rated Current 4 A Range xStart Contact Rated Voltage 400 V ac Series DILA Normal State Configuration 4 NO Number of Auxiliary Contacts 0 Terminal Type Screw Length 68mm Depth 117mm Width 45mm.
Eaton Relays:
...
|
|
EATON Contactors & Thermal Overload Relays ZB32 Contacts with a rated voltage of 690 V AC
Product Brief for ZB32: Protects the motor from phase errors or overloads, provides short-circuit protection when connected directly to the contacts Suitable for the protection of ATEX motors Single-phase sensitivity according to IEC/EN 60947 When the overload relay is not mounted directly on the contactor or when multiple contacts are used
|
|
EATON Relay Overload ZB65 50-65A Trip Class 10A
Product Brief for ZB65: FLC Motor Rating 57 → 65 A Control Voltage 500 V ac Contact Current Rating 65 A Contact Voltage Rating 690 V AC Mounting Style Direct Contactor Series ZB65 Normal State Configuration NO/NC Number of Auxiliary Contacts 2 Rated ...
|
|
EATON 7A AC Contactor Relay DILM7-10C(220-230V50HZ)
DILM7-10C Product Introduction: 32A and below specifications contactors can be directly controlled by PLC, thus reducing the number of intermediate relaysAll DC operated products and AC operated 115A, 150A, 170A products have built-in suppressors, simplifying engineering Eaton & Muller 7A AC Contactor Type ...
|
|
EATON relay, overload, ZB12, control voltage 500 V AC
Product Brief for ZB12: Suitable for Protection of Atex Motors Single-phase sensitivity according to IEC/EN 60947 When the overload relay is not mounted directly on the contactor or when multiple contactors are used, a mounting bracket is required (stock no. 493-0488- ZB32 only).
Eaton UPS:
...
|
|
Eaton Thermal Overload Relay 8TT91SDRS contact current rating 10.4 A
Product Brief for the 8TT91SDRS: This series of overload relays is suitable for use with MEM Eaton package starters. FLC Motor Rating 6.9 → 10.4 A Contact Current Rating 10.4 A Mounting Style Direct Contactor Series ADS8 Normal ...
|
|
EATON Contactors & Thermal Overload Relays DILER-22 110ACV
Product Brief for DILER-22: AC or DC control coil only 10A rated contacts with protection Surface Mount or DIN Rail Mount Maximum Voltage Rating 500 V AC/250 V DC Dimensions: H x W x D 58 x 45 x 52 mm.
Eaton Relays:
...
|
|
EATON 7A AC Contactor Relay DILM7-10C(220-230V50HZ)
DILM7-10C Product Introduction: Same form factor for AC and DC operation simplifies design Contactors of 32A and below can be controlled directly by the PLC, thus reducing the number of intermediate relays With extremely low heat dissipation, the control cabinet can allow for higher mounting densities
EATO ...
|
|
EATON relay overload ZB12 control voltage 500 V AC
Product brief for ZB12: Protects motors from phase errors or overloads, provides short-circuit protection when connected directly to the contacts Suitable for the protection of ATEX motors Single-phase sensitivity according to IEC/EN 60947 When the overload relay is not directly mounted on the contactor or when multiple connectors are used...
|
|
Eaton Relay Overload Controller DILER-31 230V, 3 NO
Product Brief for DILER-31: Surface Mount or DIN Rail Mount Maximum Rated Voltage 500V AC/250V DC Dimensions: H x W x D 58 x 45 x 52 mm.
Eaton Relays:
Product Technical Parameters The above is EATON/Eaton relay overload control ...
|
|
Eaton relay overload ZB32 control voltage 500 V AC
Product Brief for ZB32: Protects the motor from phase errors or overloads Short-circuit protection when connected directly to contacts Suitable for protection of ATEX motors Single-phase sensitivity according to IEC/EN 60947 When the overload relay is not mounted directly on the contactor or when multiple connectors are used...
|
|
EATON Contactor Relay DILA-31 24V DC 3 Closed with 1 Open Contact
Product brief introduction of DILA-31: Length 45mm, Depth 125.2mm, Width 68mm, Maximum Operating Temperature: +60°C, Minimum Operating Temperature: -25°C.
Eaton UPS:
Product technical parameters
The above is the product introduction of EATON Contactor Relay DILA-31 ...
|
|
Eaton Thermal Overload Relay 8TT89 contact current rating 2.5 A
Product Brief for 8TT89: Number of Contacts 1 Rated Power 1.1 kW Reset Method Automatic Width 105.8mm Depth 96.9mm Length 159.4mm Maximum operating temperature +60°C Operating temperature range -40 → +60 °C Minimum operating temperature -40°C.
Eaton...
|
|
EATON Contactors & Thermal Overload Relays ZB150-125 95A - 125A
Product Brief of ZB150-125: FLC Motor Rating 95 → 125 A Control Voltage 500 V ac Contact Rated Current 125 A Contact Rated Voltage 1 kV AC Mounting Style Direct Contactor Series ZB Normal State Configuration NO/NC Number of Auxiliary Contacts 2 Rated ...
|
|
EATON Relay Overload ZB32 6-10A Rated Power 6 W
Product Brief for ZB32: Protective Single-Phase Sensitivity for ATEX Motors According to IEC/EN 60947 When the overload relay is not mounted directly on the contactor or when multiple contactors are used, a mounting bracket is required (stock no. 493-0488- ZB32 only).
Eaton UPS:
Products...
|
|
EATON Contactor Miniature Relay DILER-40-G 4NO 24V DC Operation
Product Brief for DILER-40-G: Surface Mount or DIN Rail Mount Maximum Rated Voltage 500V AC/250V DC Dimensions: H x W x D58 x 45 x 52 mm.
Eaton UPS:
Product technical parameters
The above are EATON/Eaton Contactor Miniature Relays ...
|
Contact
working hours
