Festo/Festo_ EB bladder cylinders

　　DSNU-10-100-P-A Description: Piston standard cylinder, stroke 100 mm, piston diameter 10 mm, piston rod thread M4, short model code DSNU, cushioning: elastic cushion rings/pads at both ends, piston rod ends: male thread, working medium: compressed air, according to ISO 8573-1: ...

　　Product Details: Working stroke 200 mm 　　Size 60 　　Stroke margin 0 mm 　　Screw diameter 12 mm 　　Screw pitch 12 mm/U 　　Short model code ELGC 　　Installation position Optional 　　Guide rails Recirculating ball bearing guide rails 　　Devise...

　　The Festo CPX-CMAX-C1-1 axis controller with servo positioning controller as a P-module supports pneumatic piston rod drives, piston rod drives and oscillating drive force and position adjustment for all available fieldbus Ethernet and controller CEC in CPX. ...

　　Festo DNCI standard cylinder with linear potentiometer, standard profile cylinder according to ISO 15552 with fixed or adjustable cushion and displacement encoder for non-contact measurement. Product Details: 1. ISO 15552 based on ...

　　　　The cost-effective ELGC axis series from Festo ELGC-BS-KF-32-100-8P allows you to maintain very compact dimensions and make the most of the installation space, e.g. for small parts handling and tabletop applications. The spindle axis also has an impressive ...

　　Product description: Festo ELGC-BS-KF-80-300-16P spindle axis Working stroke: 300 mm Size: 80 Screw diameter: 16 mm Screw pitch: 16 mm/U Guides: Recirculating ball bearing guides ...

　　ADN-50- 536309 Introduction: Compact cylinder, double acting cylinder, with elastic cushions at both ends, position detection by proximity switch, pneumatic cushioning, self-adjusting at both ends, with piston, square piston rod, with high temperature seals, maximum temperature 120 degrees. Festo/Fe...

　　DRVS Introduction: Swing Actuator_Double Acting Swing Actuator, Lightweight and concise double acting swing drive with rotating vanes. Double-acting vane rotary action cylinder, lighter than other rotary action cylinders, modern and compact design, fixed swing angle, swing angle can be adjusted with accessories, waterproof and dustproof housing ...

　　DMSP Introduction: Pneumatic Tendon _ Single Acting Pull-out Type, Clamping, Vibrating, Swinging: Pneumatic Tendon is a kind of airtight polymer biomimetic product with contraction characteristics and crimping technology. Powerful, fast, no-drag sliding. Festo/Festo_DMSP pneumatic tendon ...

　　Festo DSMI-25-270-A-B oscillating drive with angle potentiometer, double-acting vane rotary actuator and metal fixed stop as well as an integrated rotary potentiometer. Product Details: Ambient temperature: -10 °C ... 60 °C The punch of the end position ...

　　The Festo DFPI rod cylinder with displacement encoder and corrosion-resistant linear drive DFPI are easy to install, robust and reliable to use, in accordance with ISO 15552, with a built-in linear potentiometer or a fully integrated positioner. Product Details: 1. Special ...

　　Product Details: Short model code: DADE Diagnostic function: Displayed via LED Mounting Position: Optional Short Circuit Current Rating: Yes Reverse Polarity Protection: For PLC plug S1 Repeatability: min. ± 0.1 mm ...

　　Festo/Festo_ compact cylinder ADN-20- -KP- 548206 Description: Double-acting, standard bore, with clamping device, elastic cushioning at both ends, position detection by means of proximity switches, integrated clamping device, extended external piston rod thread. Festo/Festo_ ...

　　ADN-25- -EL- 548215 Introduction: Compact cylinder, standard bore type, with end-position holes, elastic cushions at both ends, position detection by means of proximity switches, can be installed in any position, additional installation is required for safety-related control systems. Festo/...

　　DSBC Profile: Piston Seal Material: TPE-U(PU), Piston Material: Refined Aluminum Alloy, Nut Material: Galvanized Steel, Bearing Material: POM Stroke: 100 mm, Piston Diameter: 100 mm, Cushioning: Self-Adjusting Pneumatic End Position Cushioning. Festo/Festo_ ...

　　Festo DADE-MVC-010 measured value converter for standard cylinders DNCI and DDPC; Convert the sensor signal to a voltage or current signal; Diagnostic display via LED; Fix with through-holes. Product Details: Short Model Code: ...

　　EV Introduction: Piston rod less cylinder, so that the stroke is close to the stop, the pressure chamber is equipped with a diaphragm, the working medium is filtered compressed air, lubricated or unlubricated, structural features Diaphragm clamp cylinder, installation: through the hole, must be close to a stop during operation. Festo/F...

　　Festo DSMI-40-270-A-B oscillating drive, drive shaft, running blades in ball bearings, sensing via integrated angular displacement encoder, via proximity switches. Product Details: Rotation angle adjustment range: 0 deg ... 270 deg ...

　　DSNU-10-15-P-A Introduction: 15 mm standard cylinder, stroke 15 mm, piston diameter 10 mm, piston rod thread M4, short model code DSNU, cushion with elastic buffer rings/pads at both ends, mounting position: optional according to CETOP RP 52 PISO 6432, piston rod ends: outer screw ...

　　Festo/Festo_ Flat Cylinder DZF-50-200-A-P-A 161301 Introduction: Working medium: compressed air, in line with the standard, working environment temperature 0-80 degrees, can be used for lubrication work, with elastic cushions at both ends, with piston and piston rod. Festo/Fest ...