Festo/Festo_DMSP pneumatic tendon _ single-acting pull-out

　　ADN-25- -EL- 548215 Introduction: Compact cylinder, standard bore type, with end-position holes, elastic cushions at both ends, position detection by means of proximity switches, can be installed in any position, additional installation is required for safety-related control systems. Festo/...

　　DHTG Introduction: Rotary indexing table, indexing table with selectable indexing, reversible direction of rotation and energy chain, robust mechanical system, easy planning and commissioning, through-hole for energy feed, threaded for position sensing, one-way throttle valve for speed adjustment. Festo/Fes ...

　　Festo/Festo_ Flat Cylinder DZF-50-200-A-P-A 161301 Introduction: Working medium: compressed air, in line with the standard, working environment temperature 0-80 degrees, can be used for lubrication work, with elastic cushions at both ends, with piston and piston rod. Festo/Fest ...

　　Product description: Festo ELGC-BS-KF-80-300-16P spindle axis Working stroke: 300 mm Size: 80 Screw diameter: 16 mm Screw pitch: 16 mm/U Guides: Recirculating ball bearing guides ...

　　DRVS Introduction: Swing Actuator_Double Acting Swing Actuator, Lightweight and concise double acting swing drive with rotating vanes. Double-acting vane rotary action cylinder, lighter than other rotary action cylinders, modern and compact design, fixed swing angle, swing angle can be adjusted with accessories, waterproof and dustproof housing ...

　　Standard Pneumatic cylinders from Festo DDPC with linear potentiometer and ISO cylinders in accordance with ISO 15552 with fixed cushioning and non-contact displacement encoders. Product Details: 1. Standards-based cylinders in accordance with ISO 15552 2. Equipped with ...

　　Festo ELGC-BS-KF-45-100-10P spindle axis with internal guide rail and ball screw drive; space-saving position sensing; Flexible motor connection; The toothed belt axis, the ball screw axis ELGC and the mini slide EGSC form the form of a retractable ...

　　The Festo CPX-CMAX-C1-1 axis controller with servo positioning controller as a P-module supports pneumatic piston rod drives, piston rod drives and oscillating drive force and position adjustment for all available fieldbus Ethernet and controller CEC in CPX. ...

DSNU-10-10-P-A Description: Standard cylinder, piston diameter 10 mm, with elastic buffer rings/pads at both ends, piston rod thread: M4, can be operated with lubricating media (must be lubricated all the time), additional moving mass per 10 mm stroke: 1 g, mounting: with accessories. ...

　　EV Introduction: Piston rod less cylinder, so that the stroke is close to the stop, the pressure chamber is equipped with a diaphragm, the working medium is filtered compressed air, lubricated or unlubricated, structural features Diaphragm clamp cylinder, installation: through the hole, must be close to a stop during operation. Festo/F...

　　The Festo DFPI rod cylinder with displacement encoder and corrosion-resistant linear drive DFPI are easy to install, robust and reliable to use, in accordance with ISO 15552, with a built-in linear potentiometer or a fully integrated positioner. Product Details: 1. Special ...

　　Festo DGCI rodless cylinder with displacement encoder, positioning drive with eccentric sealing system for practical, leak-free long travels without limitations, and displacement encoder using a non-contact measuring method. 1. Equipped with guide rails 2. With ...

　　Product Details: Working stroke 200 mm 　　Size 60 　　Stroke margin 0 mm 　　Screw diameter 12 mm 　　Screw pitch 12 mm/U 　　Short model code ELGC 　　Installation position Optional 　　Guide rails Recirculating ball bearing guide rails 　　Devise...

　　EB Introduction: Air bag cylinder, drive element or air spring element, used in harsh, dusty environmental conditions, single or double bellows cylinder, short stroke, but large output force, uniform speed movement: no stick-slip effect, use in dusty or watery places, no maintenance. Festo/...

　　DSNU-10-15-P-A Introduction: 15 mm standard cylinder, stroke 15 mm, piston diameter 10 mm, piston rod thread M4, short model code DSNU, cushion with elastic buffer rings/pads at both ends, mounting position: optional according to CETOP RP 52 PISO 6432, piston rod ends: outer screw ...

　　DSBC-100-100-PPSA-N Introduction: ISO Standard Cylinder, Piston Seal Material: TPE-U(PU) Piston Material, Refined Aluminum Alloy: , Mother Material: Galvanized Steel, Ring Screw Material: Galvanized Steel, Bearing Material: POM, Stroke: 100 mm, Piston Diameter: 100 mm ...

　　CRHD Introduction: Round cylinder, stainless steel, strong resistance, corrosion resistance, suitable for harsh environmental conditions. With an easy-to-clean design, it is optimized for demanding requirements. Different end caps are available for flexible design. A heat-resistant version is also available. Festo/Fest ...

　　DGST Introduction: Small Slide Table _ Slide Cylinder, the most compact slide type cylinder on the market. It is equipped with an integrated shock absorber and sensor holder as well as an integrated basic cushion. And most importantly: the slide table and coupling plate are one-piece components – providing excellent torsional stiffness and unmatched ...

　　Festo DNCI standard cylinder with linear potentiometer, standard profile cylinder according to ISO 15552 with fixed or adjustable cushion and displacement encoder for non-contact measurement. Product Details: 1. ISO 15552 based on ...

　　Festo/Festo_AV-25-20 Single-acting short-stroke cylinder Introduction: Single-acting short-stroke cylinder, profile grooves on three sides, flush installation of proximity switches, complete accessories variety, exquisite structure, easy to clean, good corrosion resistance, optional integrated position sensing or additional position ...