Festo/Festo_DSNU-10-100-P-A_ ISO piston standard cylinders

　　Festo DADE-MVC-010 measured value converter for standard cylinders DNCI and DDPC; Convert the sensor signal to a voltage or current signal; Diagnostic display via LED; Fix with through-holes. Product Details: Short Model Code: ...

　　The Festo DFPI rod cylinder with displacement encoder and corrosion-resistant linear drive DFPI are easy to install, robust and reliable to use, in accordance with ISO 15552, with a built-in linear potentiometer or a fully integrated positioner. Product Details: 1. Special ...

　　Standard Pneumatic cylinders from Festo DDPC with linear potentiometer and ISO cylinders in accordance with ISO 15552 with fixed cushioning and non-contact displacement encoders. Product Details: 1. Standards-based cylinders in accordance with ISO 15552 2. Equipped with ...

　　Product description: Festo ELGC-BS-KF-80-300-16P spindle axis Working stroke: 300 mm Size: 80 Screw diameter: 16 mm Screw pitch: 16 mm/U Guides: Recirculating ball bearing guides ...

　　Festo DSMI-25-270-A-B oscillating drive with angle potentiometer, double-acting vane rotary actuator and metal fixed stop as well as an integrated rotary potentiometer. Product Details: Ambient temperature: -10 °C ... 60 °C The punch of the end position ...

　　ADN-50- 536309 Introduction: Compact cylinder, double acting cylinder, with elastic cushions at both ends, position detection by proximity switch, pneumatic cushioning, self-adjusting at both ends, with piston, square piston rod, with high temperature seals, maximum temperature 120 degrees. Festo/Fe...

　　Festo DGCI rodless cylinder with displacement encoder, positioning drive with eccentric sealing system for practical, leak-free long travels without limitations, and displacement encoder using a non-contact measuring method. 1. Equipped with guide rails 2. With ...

　　Festo DSMI-40-270-A-B oscillating drive, drive shaft, running blades in ball bearings, sensing via integrated angular displacement encoder, via proximity switches. Product Details: Rotation angle adjustment range: 0 deg ... 270 deg ...

　　Festo DDLI rodless cylinders with linear potentiometer and pneumatic positioning axis with non-contact measuring displacement encoder, which can be connected to the customer's own rail. Product Details: 1. Based on DGC-K linear drive 2. No guide rails 3 ...

DSNU-10-10-P-A Description: Standard cylinder, piston diameter 10 mm, with elastic buffer rings/pads at both ends, piston rod thread: M4, can be operated with lubricating media (must be lubricated all the time), additional moving mass per 10 mm stroke: 1 g, mounting: with accessories. ...

　　Festo/Festo_ compact cylinder ADN-20- -KP- 548206 Description: Double-acting, standard bore, with clamping device, elastic cushioning at both ends, position detection by means of proximity switches, integrated clamping device, extended external piston rod thread. Festo/Festo_ ...

　　DRVS Introduction: Swing Actuator_Double Acting Swing Actuator, Lightweight and concise double acting swing drive with rotating vanes. Double-acting vane rotary action cylinder, lighter than other rotary action cylinders, modern and compact design, fixed swing angle, swing angle can be adjusted with accessories, waterproof and dustproof housing ...

　　DMSP Introduction: Pneumatic Tendon _ Single Acting Pull-out Type, Clamping, Vibrating, Swinging: Pneumatic Tendon is a kind of airtight polymer biomimetic product with contraction characteristics and crimping technology. Powerful, fast, no-drag sliding. Festo/Festo_DMSP pneumatic tendon ...

　　DHTG Introduction: Rotary indexing table, indexing table with selectable indexing, reversible direction of rotation and energy chain, robust mechanical system, easy planning and commissioning, through-hole for energy feed, threaded for position sensing, one-way throttle valve for speed adjustment. Festo/Fes ...

　　Product Details: Short model code: DADE Diagnostic function: Displayed via LED Mounting Position: Optional Short Circuit Current Rating: Yes Reverse Polarity Protection: For PLC plug S1 Repeatability: min. ± 0.1 mm ...

　　EV Introduction: Piston rod less cylinder, so that the stroke is close to the stop, the pressure chamber is equipped with a diaphragm, the working medium is filtered compressed air, lubricated or unlubricated, structural features Diaphragm clamp cylinder, installation: through the hole, must be close to a stop during operation. Festo/F...

　　EB Introduction: Air bag cylinder, drive element or air spring element, used in harsh, dusty environmental conditions, single or double bellows cylinder, short stroke, but large output force, uniform speed movement: no stick-slip effect, use in dusty or watery places, no maintenance. Festo/...

　　The Festo CPX-CMAX-C1-1 axis controller with servo positioning controller as a P-module supports pneumatic piston rod drives, piston rod drives and oscillating drive force and position adjustment for all available fieldbus Ethernet and controller CEC in CPX. ...

　　ADN-S-10-10-A Introduction: Compact cylinder, stroke: 10 mm, piston diameter: 10 mm, short model code: ADN-S, buffer: unbuffered, very compact structure, large range of choices, small housing width, short housing length. Festo/Festo_ADN-S-10-1 ...

　　EZH-10/40-40-A-B Introduction: Flat cylinder EZH-10/40-40-A-B, without end position detection, barb interface, with 3mm air hose, structural features: piston rod, installed through transverse boring, can be used for lubrication work. Festo/Festo_ flat cylinder EZH-10/ ...