Festo/Festo_AV-25-20 single-acting short-stroke cylinder

　　DSNU-10-15-P-A Introduction: 15 mm standard cylinder, stroke 15 mm, piston diameter 10 mm, piston rod thread M4, short model code DSNU, cushion with elastic buffer rings/pads at both ends, mounting position: optional according to CETOP RP 52 PISO 6432, piston rod ends: outer screw ...

　　DGST Introduction: Small Slide Table _ Slide Cylinder, the most compact slide type cylinder on the market. It is equipped with an integrated shock absorber and sensor holder as well as an integrated basic cushion. And most importantly: the slide table and coupling plate are one-piece components – providing excellent torsional stiffness and unmatched ...

DSNU-10-10-P-A Description: Standard cylinder, piston diameter 10 mm, with elastic buffer rings/pads at both ends, piston rod thread: M4, can be operated with lubricating media (must be lubricated all the time), additional moving mass per 10 mm stroke: 1 g, mounting: with accessories. ...

　　Festo DSMI-25-270-A-B oscillating drive with angle potentiometer, double-acting vane rotary actuator and metal fixed stop as well as an integrated rotary potentiometer. Product Details: Ambient temperature: -10 °C ... 60 °C The punch of the end position ...

　　Festo DSMI-63-270-A-B swivel drive, design drive shaft, running blades in ball bearings; Position detection via proximity switches, sensed by means of an integrated angular displacement encoder. Operating pressure for positioning/soft stop: 4 bar ... 8 bar ...

　　EZH-10/40-40-A-B Introduction: Flat cylinder EZH-10/40-40-A-B, without end position detection, barb interface, with 3mm air hose, structural features: piston rod, installed through transverse boring, can be used for lubrication work. Festo/Festo_ flat cylinder EZH-10/ ...

　　　　The cost-effective ELGC axis series from Festo ELGC-BS-KF-32-100-8P allows you to maintain very compact dimensions and make the most of the installation space, e.g. for small parts handling and tabletop applications. The spindle axis also has an impressive ...

　　Standard Pneumatic cylinders from Festo DDPC with linear potentiometer and ISO cylinders in accordance with ISO 15552 with fixed cushioning and non-contact displacement encoders. Product Details: 1. Standards-based cylinders in accordance with ISO 15552 2. Equipped with ...

　　DHTG Introduction: Rotary indexing table, indexing table with selectable indexing, reversible direction of rotation and energy chain, robust mechanical system, easy planning and commissioning, through-hole for energy feed, threaded for position sensing, one-way throttle valve for speed adjustment. Festo/Fes ...

　　DSBC Profile: Piston Seal Material: TPE-U(PU), Piston Material: Refined Aluminum Alloy, Nut Material: Galvanized Steel, Bearing Material: POM Stroke: 100 mm, Piston Diameter: 100 mm, Cushioning: Self-Adjusting Pneumatic End Position Cushioning. Festo/Festo_ ...

　　Festo/Festo_ compact cylinder ADN-20- -KP- 548206 Description: Double-acting, standard bore, with clamping device, elastic cushioning at both ends, position detection by means of proximity switches, integrated clamping device, extended external piston rod thread. Festo/Festo_ ...

　　Product Details: Short model code: DADE Diagnostic function: Displayed via LED Mounting Position: Optional Short Circuit Current Rating: Yes Reverse Polarity Protection: For PLC plug S1 Repeatability: min. ± 0.1 mm ...

　　The Festo CPX-CMAX-C1-1 axis controller with servo positioning controller as a P-module supports pneumatic piston rod drives, piston rod drives and oscillating drive force and position adjustment for all available fieldbus Ethernet and controller CEC in CPX. ...

　　DMSP Introduction: Pneumatic Tendon _ Single Acting Pull-out Type, Clamping, Vibrating, Swinging: Pneumatic Tendon is a kind of airtight polymer biomimetic product with contraction characteristics and crimping technology. Powerful, fast, no-drag sliding. Festo/Festo_DMSP pneumatic tendon ...

　　The Festo DFPI rod cylinder with displacement encoder and corrosion-resistant linear drive DFPI are easy to install, robust and reliable to use, in accordance with ISO 15552, with a built-in linear potentiometer or a fully integrated positioner. Product Details: 1. Special ...

　　Festo DNCI standard cylinder with linear potentiometer, standard profile cylinder according to ISO 15552 with fixed or adjustable cushion and displacement encoder for non-contact measurement. Product Details: 1. ISO 15552 based on ...

　　Festo DGCI rodless cylinder with displacement encoder, positioning drive with eccentric sealing system for practical, leak-free long travels without limitations, and displacement encoder using a non-contact measuring method. 1. Equipped with guide rails 2. With ...

　　DSBC-100-100-PPSA-N Introduction: ISO Standard Cylinder, Piston Seal Material: TPE-U(PU) Piston Material, Refined Aluminum Alloy: , Mother Material: Galvanized Steel, Ring Screw Material: Galvanized Steel, Bearing Material: POM, Stroke: 100 mm, Piston Diameter: 100 mm ...

　　EV Introduction: Piston rod less cylinder, so that the stroke is close to the stop, the pressure chamber is equipped with a diaphragm, the working medium is filtered compressed air, lubricated or unlubricated, structural features Diaphragm clamp cylinder, installation: through the hole, must be close to a stop during operation. Festo/F...

　　Festo DSMI-40-270-A-B oscillating drive, drive shaft, running blades in ball bearings, sensing via integrated angular displacement encoder, via proximity switches. Product Details: Rotation angle adjustment range: 0 deg ... 270 deg ...