| project | content |
| Order product number | EX-L212 |
| Model | EX-L212 |
| Detection distance | 3m |
| Spot size (typical example) | Approximately 8x5.5mm (vertical x horizontal) |
(at a distance of 1 m) |
Note: At a distance of 3 m, the spot size is about H17xW11mm (a representative example of visual inspection). |
| Detect objects | Opaque body of ø3mm or more |
| Smallest Detected Objects (Typical Example) | - |
Note: Adjust the sensitivity regulator to the reference value at the optimal setting. |
| Repeatability | Detection shaft right angle direction: 0.05mm or less |
| Repeatability (typical example) | - |
Note: Adjust the sensitivity regulator to the reference value at the optimal setting. |
| Supply voltage | 12~24V DC ±10% fluctuation P-P10% or less |
| Current consumption | Projector: 10mA or less |
Light receiver: 10mA or less |
| output | NPN transistors and open-circuit collectors |
・Maximum sink current: 50mA |
・Applied voltage: 26.4V DC or less (output between -0V) |
・Residual voltage: 2 V or less (at 50 mA inflow current), 1 V or less (at 16 mA inflow current) |
| Output: Outputs the action | ON when the light is in/ON when the light is not in the light is set: The output action is switched to the input line |
| Output: Short-circuit protection | Equipped with (short-circuit protection/reverse polarity protection) |
| Reaction time | 0.5ms or less |
| Working status indicator | Orange LED (lights up when ON is output) Transmissive mounted on the light receiver |
| Stability indicator | Green LED (lights up when light is stable and light is not in light) The transmittance type is mounted on the light receiver |
| Power indicator | The green LED (lights up when powered on) is mounted on the projector |
| Sensitivity regulator | - |
| Environmental resistance: Protective structure | IP67(IEC、JIS) |
| Environmental resistance: The ambient temperature at which it is used | -10~+55°C (but there should be no condensation and freezing), storage: -30~+70°C |
| Environmental resistance: Ambient humidity is used | 35~85%RH, when stored: 35~85%RH |
| Environmental resistance: The illumination of the use environment | Incandescent lamp: 3,000 lx or less on the light-receiving surface |
| Environmental resistance: Withstand voltage | AC1,000V for 1 minute Between all charging parts and the case |
| Environmental resistance: insulation resistance | A high-impedance meter based on 250 VDC between all charging parts and the housing, 20 MΩ or more |
| Environmental resistance: Vibration resistance | Frequency: 10~500Hz |
Double amplitude: 1.5mm (10G max) 2 hours in each direction of X, Y and Z |
| Environmental resistance: impact resistance | Acceleration: 500 m/s2 (about 50 G), 3 times in each direction of X, Y and Z |
| Projectors | Red Diode Laser Class 1 (JIS/IEC/FDA) (Note) |
[Maximum output: 390μW, peak luminescence wavelength 655nm] |
Note: Laser Circular No. 50 (June 24, 2007) and FDA standards (21 CFR 1040.10, 1040.11) shall prevail. |
| Material | Shell: PBT |
Front window: Acrylic |
Lens: Glass |
| cable | 0.15mm2 4-core (2-core transmissive projector) 2m with rubber insulated cable |
| weight | Body weight: Beamer: Approximately 40 g, Receiver: Approximately 40 g |
Package weight: about 90g |
| annex | MS-EXL2-2 (mounting plate): 2 pcs |
Contact
working hours
