Panasonic DC Power Type Distance Setting Reflective Type Photoelectric Sensor EQ-511

Panasonic DC Power Supply Type Distance Setting Reflective Type Photoelectric Sensor EQ-511, NPN Open Collector Transistor, Maximum Inflow Current: 100mA or Less, Applied Voltage: 30V DC or Less, Residual Voltage: 1V or Less
Panasonic DC Power Type Distance Setting Reflective Type Photoelectric Sensor EQ-511

Panasonic DC Power Type Distance Setting Reflective Type Photoelectric Sensor EQ-511

project	content
Order product number	EQ-511
Model	EQ-511
The distance is set within the range	0.2～2.5m
	Note 1: The distance setting range refers to the maximum detection distance range that can be set by the distance setting adjuster. The sensor can detect objects of 0.1m or more.
	Note 2: The distance setting range, detection distance, and response are relative to the white matte paper (200x200mm).
Detection distance (when the maximum distance is set)	0.1～2.5m
Detection distance (when the maximum distance is set)	Note: The distance setting range, detection distance, and tolerance are relative to the white matte paper (200x200mm).
Deviation ( Hysteresis )	10% or less of the operating distance
Deviation ( Hysteresis )	Note: The distance setting range, detection distance, and tolerance are relative to the white matte paper (200x200mm).
Supply voltage	12~24V DC±10% pulsation P-P10% or less
Power consumption/current consumption	45mA or less
output	NPN open-collector transistors
	・Maximum inflow current: 100mA or less
	・Applied voltage: 30V DC or less (between output and 0V)
	・Residual voltage: 1 V or less (at 100 mA inflow current), 0.4 V or less (at 16 mA inflow current)
	PNP open-collector transistors
	・Maximum source current: 100 mA or less
	・Applied voltage: 30V DC or less (between output and +V)
	・Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA source current)
Output: Outputs the action	You can use the toggle switch to select ON on detection or ON on non-detection
Output: Short-circuit protection	Equipped with
Reaction time	2ms or less
Working status indicator	Orange LED (lights up when ON is output)
Stability indicator	Green LED (lights up in steady operation)
Distance setting adjuster	Equipped with a mechanical 2-turn adjuster with indicator
Detection mode switching	The BGS/FGS function can be selected with a toggle switch
Timer function	-
Automatic anti-jamming function	Equipped with
Automatic anti-jamming function	Note: Sometimes the detection is unstable depending on the setting state and the object being detected. When setting up this product, be sure to check the operation with the actual inspection object.
Environmental resistance: Protective structure	IP67 (IEC), leak-proof type (JIS)
Environmental resistance: The ambient temperature at which it is used	-20~+55°C (note no condensation and freezing), storage: -30~+70°C
Environmental resistance: Ambient humidity is used	35~85%RH, when stored: 35~85%RH
Environmental resistance: The illumination of the use environment	Incandescent lamp: 3,000 lx or less on the light-receiving surface
Environmental resistance: Withstand voltage	AC1,000V for 1 minute between all power connection terminals and housing
Environmental resistance: insulation resistance	A high-impedance meter based on 250 VDC between all power supply terminals and housings of 20 MΩ or more
Environmental resistance: Vibration resistance	Frequency: 10~55Hz, double amplitude: 1.5mm X, 2 hours each in Y and Z directions
Environmental resistance: impact resistance	Acceleration 500 m/s2 (approx. 50 G) 3 times each in the X, Y and Z directions
Projectors	Infrared LED (projection peak wavelength: 855nm, modulated type)
Light Receiver	2-segment photodiode
Material	Body shell: ABS
	Front cover: Polycarbonate
	Display cover: Polycarbonate
接続方式	Terminal block connector
Wiring cables	Suitable for ring cable ø9~ø11mm
Wiring length	The total length of rubber cables of 0.3mm2 or more can be extended to 100m
weight	Body weight: Approximately 85 g
annex	Adjustment screwdriver: 1 pc

Panasonic DC Power Supply Type Distance Setting Reflective Type Photoelectric Sensor EQ-511, NPN Open Collector Transistor, Maximum Inflow Current: 100mA or Less, Applied Voltage: 30V DC or Less, Residual Voltage: 1V or Less. 76 Technology with quality assurance, with excellent reputation, so that you are comfortable in the purchase, rest assured in use, 76 Technology, need your trust and support.

Panasonic DC Power Type Distance Setting Reflective Type Photoelectric Sensor EQ-511

Sections viewed

Contact

working hours