The Rittal_ models of Rittal enclosures 4114000_255x90x210mm steel adapters

8115245 Profile: VX Side panel, screw-fastened, for HD: 1 Rittal/Rittal_8115245 Model features introduced Side panels, screw-fastened, sheet steel, for VX. Clip-on side panel brackets, time-saving automatic potential equalization and higher EMC protection, which ...

Product Introduction Rittal System Viewer for VX, TS, VX SE Product Model 2736.500 　　It is used to cover the display and operation of instruments or openings, to prevent the ingress of dirt and liquids, and to prevent unauthorized use. Type: 60 profiles Give birth...

8620092 Description: Rittal steel 19-inch base/column trim panel Rittal/Rittal_8620092 Model features introduced For cable entries in pedestals/platforms. With a pedestal/column height of 200 mm, it is possible to use one or two decorative panels with brush bars. Composed...

8100731 Introduction: VX Punched section 23 x 89 mm Rittal/Rittal 8100731 Model features introduced For variable, the casing frame is installed separately at the level of internal installation. Simply locate the system punch and tighten the screws to the top of the system stroke on all four sides ...

8620063 Introduction: VX Base/plinth corner piece, with base/p Rittal/Rittal 8620063 Model features introduced High-load pedestal/corner pieces with molded self-positioning to rocker arm housing system, with or without trim panels, depending on the application.

Product Introduction Product name: Rittal Rittal Product Type: Rittal Fitting Combo for Air/Water Heat Exchangers Product Model: 3201.990 　　It is used for professional water pipe installation and volume control. Product Description: For professional water pipes ...

8620093 Introduction: Rittal steel 19-inch base/column trim panel Rittal/Rittal 8620093 Model features introduced For cable entries in pedestals/platforms. With a pedestal/column height of 200 mm, it is possible to use one or two decorative panels with brush bars. Composed...

8618301 Introduction: Rittal lock, lock tab, die-cast zinc, 8mm, for use with doors/locks Rittal/Rittal 8618301 Model features introduced Model parameters are introduced All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. ...

Product Introduction Product model 2500.610 Type: 2-pole socket Cross-section, nominal:1.5 mm² Width: 15.6 mm Height: 13.2 mm Depth: 61.6 mm Round conductor connection, single core: 0.25 ‐ 1.5 mm ...

8620094 Description: Rittal steel 19-inch base/base trim panel Rittal/Rittal 8620094 Model features introduced For cable entries in pedestals/platforms. With a pedestal/column height of 200 mm, it is possible to use one or two decorative panels with brush bars. Composed...

8618305 Introduction: Rittal locks, lock tabs, die-cast zinc, for use with doors/locks Rittal/Rittal 8618305 Model features introduced Model parameters are introduced All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods come from manufacturers or formal agents. We...

Description: Rittal cabinet/Rittal_ type STL/ETL70 linear motor feedback system Resolution: 1 μm, measuring length: ≤ 16,384 mm, current consumption: < 200 mA. 　　parameter Measuring length: ≤ 16,384 mm Resolution: 1 μm Cycle length: ...

8609205 Profile: VX Divider panel, for HD: 2000x600 mm Rittal/Rittal 8609205 Model features introduced For shielding individual housing units. Due to the symmetry of the frame system, the divider plate can also be used in the rear. Full circle bi-fold to ensure stability and hold ...

8617720 Introduction: Rittal Heavy Duty Slide, 18mm deep, made of sheet steel Rittal/Rittal_8617720 Model features introduced For variable, the casing frame is installed separately at the level of internal installation. It can also be used with other perforated sections, ready on the back to accommodate cables ...

Rittal Rittal hinged lid for KL Product type KL 1592.010 The hinged lid can be simply screwed on to the reinforced edge of the box guard and the cover. – Product description Introduction: The hinged fixed lid can be simply fixed with screws on the box protective groove and the cover plate.

4164500 Introduction: VX Captive nut, thread M6 Rittal/Rittal _4164500 Model features introduced For full mounting in the housing section, the compression spring is designed as an insertion aid to ensure a reliable mechanical and electrical connection in the system stroke with only a sliding from the side.

8617100 Description: VX Punched section 23 x 64 mm Rittal/Rittal _8617100 Model features introduced For variable, the casing frame is installed separately at the level of internal installation. Simply locate the system punch and tighten the screws to the top of the system stroke on all four sides ...

KL1506510 Introduction: Rittal enclosures of the KL series IP66 KL series enclosures are made of sheet steel and coated with a light grey RAL 7035 finish. The junction box folds to protect the leading edge for added stability and prevents the ingress of dust and water when opened. Installing the lugs inside the junction box can ...

8617501 Introduction: VX Baying block, internal Rittal/Rittal _8617501 Model features introduced Enables flexible positioning and all-round mounting at the swing point. Side mounting creates a flush surface for TOP mounting. Model parameters are introduced 76 Technology ...

The backplane is used for TS IT, TX CableNet Product model 5502.550 It has potential equalization by fixing parts and grounding points. The base plate kit is used to cover the entire bottom cut-out. Type: Multi-segment base plate, closed, with moving plate Product Description: Tong ...