Rittal cabinet/Rittal_ type STL/ETL70 linear motor feedback system Resolution: 1 μm

8617800 Introduction: Rittal Heavy Duty Slide Rail, 26mm Deep Support Rail, Steel Plate Rittal/Rittal _8617800 Model features introduced For the installation of heavier equipment such as transformers. T-head screws and slots in the bracket rails accommodate all mounting sizes. Model parameters are introduced ...

3652.270 Introduction: Rittal Painted 6U Aluminum 19-inch Front Panel, 12HP, 262.05 x 60.6mmParts Offered: 1 Front Panel:2. 5 mm natural anodized aluminum 1 handle (2 for 6U model): colorless anodized aluminum Printed circuit board bracket: Polycarbonate

8620080 Description: Rittal stainless steel 19-inch base/base trim panel Rittal/Rittal 8620080 Model features introduced Stainless steel pedestals/vertical decorative panels are used in depth to complete the pedestal/column processing unit on the side. Complete the pedestal/flatline units on both sides, ...

3685.289 Description: Rittal 100 countersunk screws for use with Ripac Vario subracks in packs of 100 Rittal/Rittal _3685.289 Model features introduced Component screw pack Quantity per pack is 100 Ripac Attachments/Upgrades for the ECO and Vario Subrack Series RipacECO...

8951000 Description: Rittal adapter, sheet steel, 125 x 500 x 2000mm, for use in secure locking housings Rittal/Rittal _8951000 Model features introduced Includes main door latch and shred kit for secure locking enclosure. With the actuator of the MasterSwitch ...

8800.020 Profile: Rittal Grey Die-cast Zinc Hinge, 80 x 10 x 120mm, suitable for SE series enclosures, steel plate doors, ts 8 series enclosures SE, TS Rittal/Rittal _8800.020 Model features introduced The Rittal hinge can be used in conjunction with the TS, SE series housings to make ...

3684.221 Introduction: Rittal Ripac VARIO Series Natural Aluminum 2 x 3U Rackmount Chassis, 21HP Crossover Kit Allows Single and Dual Euroboards to be installed in 6U subracks. Parts supplied: 2 x Front horizontal rungs: Aluminum, chromate 1 x Adapter rails: Aluminium

RP3684920 Introduction:Rittal Painted 6U Aluminum 19 Inch Front Panel, 14HPPowed Parts: 1xFilled Panel:2. 5 mm clear anodized aluminum Rittal/Rittal _RP3684920 Model features introduced Parts available with standard front fill panels: 1x Fill Panel ...

Rittal mounting plates for KL and KL-HD Product type KL 1564.700 Mounting plate for assembly, which can also be used outside the enclosure. – Product description Description: For assembly, it can also be carried out outside the cabinet. The set screws are in the cabinet attachment. Material: Steel ...

3751730 Introduction:Rittal Screw Sleeve, Threaded Insert, Aluminum, 19in Required for Use with RiCase 4U Rear Panel. Corners (2 per pack) Slide rails support for heavy-duty sliding equipment (2 per pack) Tap straps enable slides and are internally mounted in multiple positions (8 per pack) R ...

The Rittal cabinet Rittal mounting kit is used for large cradles with guards Product type SR 1995.235 – Product description Material: Steel plate Color: RAL 7035 Scope of delivery: Includes fixtures for cabinet mounting Suitable for: Enclosure type: TS Cabinet type: SE Width:...

8618200 Introduction: Rittal handle, die-cast zinc, for use with doors/locks Rittal/Rittal _8618200 Model features introduced When folded, the handle does not take up any swing space, maximizing the surface area of the door where the installed device is installed. Simple assembly, snap-in ...

8951020 Description: Rittal adapter, sheet steel, 125 x 400 x 1800mm, for use in secure locking housings Rittal/Rittal 8951020 Model features introduced Includes main door latch and shred kit for secure locking enclosure. With the actuator of the MasterSwitch ...

8619011 Introduction: VX Swing frame, large, without trim pane Rittal/Rittal 8619011 Model features introduced For mounting 482.6 mm (19 in) devices. Model parameters are introduced All suppliers of 76 Technology have been strictly audited to ensure that ...

4165500 Introduction: VX Captive nut, thread M8 Rittal/Rittal _4165500 Model features introduced For full mounting in the housing section, the compression spring is designed as an insertion aid to ensure a reliable mechanical and electrical connection in the system stroke with only a sliding from the side.

8620400 Profile: VX Base/plinth installation bracket, for Rittal/Rittal _8620400 Model features introduced For configuration of bases/ejector pins with perforated sections, with mounting flanges or cable clamp rails. Fits 100 and 200mm high base/flat head ...

8620062 Introduction: VX Base/plinth corner piece, with base/p Rittal/Rittal 8620062 Model features introduced High-load pedestal/corner pieces with molded self-positioning to rocker arm housing system, with or without trim panels, depending on the application.

8618308 Introduction: Rittal lock, lock tab, die-cast zinc, 6.5mm, for use with doors/locks Rittal/Rittal 8618308 Model features introduced Model parameters are introduced All suppliers of 76 Technology have been strictly audited to ensure that all sources of goods are from manufacturers or formal agents.

8617160 Introduction: VX Punched section 23 x 64 mm Rittal/Rittal 8617160 Model features introduced For variable, the casing frame is installed separately at the level of internal installation. Simply locate the system punch and tighten the screws to the top of the system stroke on all four sides ...

Rittal enclosure Rittal ventilated front panel width 482.6 mm (19") The product type EL 2231.000 For the ventilation of cabinets and enclosures. – Product description Description: For the ventilation of cabinets and enclosures. Material: Aluminum Surface: Natural aluminium anodized Height unit: 1 ...