Hope Sunland Hope530G11T4B inverter

Product introduction: HOPE530 series inverter is a new generation of low-noise, high-performance and multi-functional inverter independently developed by Hope Senlan Technology Co., Ltd. The HOPE530 series inverter adopts the vector control mode of rotor magnetic field orientation to achieve large torque, high precision, wide range speed regulation, high reliability and powerful function.
Hope Sunland Hope530G11T4B inverter

Features:

It integrates a high-precision rotor magnetic field oriented vector control algorithm, with 250% instantaneous torque control capability

The original multi-mode PLC operation function is especially suitable for pipe pile manufacturing and industrial washing equipment applications

Powerful process PID function: two sets of parameters, a variety of parameter transition modes, a variety of correction modes, can meet the needs of tension and synchronous control of wire drawing machine, textile, papermaking, printing and dyeing and other industries, with free PID function, can replace the external PID controller

Applicable multi-speed function: Coding, direct, overlay and number selection methods are available, especially suitable for HVAC industry applications

It has a powerful user-programmable module to flexibly meet customer needs

Built-in DC reactor

Built-in braking unit

Support through-wall installation

Fans are easy to replace

Specifications:
input
Rated voltage, frequency Three-phase: 380V, 50Hz/60Hz

Allowable Scope
Voltage fluctuation range: ±15%; Voltage unbalance: <3%; Frequency: 47~63 Hz

output
Output voltage
3 phase, 0V~input voltage, error less than 5%

Output frequency range
V/F control: 0.00~650.00Hz, vector control: 0.00~200.00Hz

Basic Norms
Motor control mode
No PG V/F control, no PG V/F control, no PG vector control, no PG vector control, V/F separation control

Steady-state speed accuracy
No PG vector control: ±0.5%; With PG vector control: ±0.05%

Starting torque
150% of rated torque at 0.50Hz≥

Overload capacity
150% rated current for 1 minute, 180% rated current for 15 seconds, 200% rated current for 2 seconds

Frequency resolution
0.01Hz for digital, 0.1% of maximum frequency for analog

Output frequency accuracy
Simulation given: ±0.2% of maximum frequency (25±10°C);
Digital Given: 0.01Hz(-10~+40°C)

Run the command channel
The operation panel is given, the control terminal is given, and the communication is given 0320, which can be switched through the terminal

Frequency given channel
Operator Panel, Communication, UP/DOWN Adjustment Value, AI1, AI2, PFI, Arithmetic Unit

Auxiliary frequency given
Enables flexible auxiliary frequency trimming, given frequency synthesis

Torque boost
Automatic torque lifting; Manual torque lifting

V/F curves
User-defined V/F curves, linear V/F curves, and 5 torque-reducing characteristic curves

Acceleration and deceleration mode
Linear acceleration and deceleration, S-curve acceleration and deceleration

Jog
Jog frequency range: 0.10~50.00Hz, jog acceleration and deceleration time: 0.1~60.0s

Automatic energy-saving operation
According to the load situation, the V/F curve is automatically optimized to achieve automatic energy-saving operation

Automatic Voltage Adjustment (AVR)
When the grid voltage changes within a certain range, the output voltage can be automatically kept constant

Automatic carrier adjustment
The carrier frequency can be automatically adjusted according to the load characteristics and ambient temperature

Random PWM
Adjust the timbre of the motor when it is running

Sag control
It is suitable for the occasion where multiple inverters drive the same load

Instantaneous stop processing
In the event of an instantaneous power failure, uninterrupted operation is achieved through bus voltage control

Energy consumption braking capacity
Built-in braking unit

DC braking capability
Braking time: 0.0~60.0s, braking current: 0.0~100.0% rated current

PFI
Maximum input frequency: 50kHz

PFO
0~50kHz open-collector type pulse square wave signal output, programmable

Analog inputs
2 analog signal inputs, voltage type and current type are optional, positive and negative inputs can be used, and analog input expansion is supported

Analog output
2 analog signal outputs, 0/4~20mA or 0/2~10V respectively, programmable

Digital inputs
5 channels of source-drain type optional multi-function digital input, support digital input expansion

Digital output
2 multi-function digital outputs; 2 multi-function relay outputs, support digital output expansion

communication
Built-in RS485 communication interface, support Modbus-protocol, USS instruction, Profibus-DP protocol, PROFINET protocol, etc

Featured Functions:
Process PID
Two sets of PID parameters; Multiple correction modes; With free PID function; Sleep function

Multi-mode PLC
Users can set up to 8 sets of PLC operation mode parameters, and a single mode PLC can reach 48 segments; The mode can be selected by the terminal; The PLC status can be stored when the power is off

Multi-speed mode
Encoding selection, direct selection, overlay selection, and number selection

User-defined menus
Up to 30 user parameters can be defined

Change the parameter display
Support parameter display different from the factory value

Torque control function
The torque/speed control can be switched through the terminals, and a variety of torque can be given

Zero servo and position control function
It can realize zero-speed position locking, precise positioning, and position control

Featured Functions:
High-speed increment and decrease counters
It can realize position synchronization control, production counting, counting stop, and precise positioning control

High-speed meter counter
It can realize fixed-length shutdown and length indication

Textile pendulum frequency function
Achieve uniform arrangement of textile winding

Programmable unit
Comparators, logic units, flip-flops, arithmetic units, filters, multiplex switches, timers

Chronometer function
It is easy to adjust the optimal energy-saving scheme

Protection features
Overcurrent, overvoltage, undervoltage, input and output phase loss, output short circuit, overheating, motor overload, external fault, analog input disconnection, stall prevention, etc

Options
Digital I/O expansion board, encoder interface board, analog input expansion board, input and output reactor, electromagnetic interference filter, Profibus-DP module, PROFINET module, Chinese/English LCD panel, operation panel mounting box, operation panel extension cable, RS485 communication module, etc

environment
Place of use
The altitude is less than 1000 meters, indoors, not exposed to direct sunlight, no dust, corrosive gas, flammable gas, oil mist, water vapor, dripping, salt spray and other occasions

Operating environment temperature/humidity
-10~+40°C/20~90%RH, no condensation of anhydrous beads

Storage temperature
－20～＋60℃

vibration
Less than 5.9m/s2 (0.6g)

structure
Ingress protection
IP20 (11KW~37kw model with protective cover can reach IP40)

Cooling method
Forced air cooling with fan control

Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only by being professional and careful in every process, every action and every detail of the service can we meet or even exceed customer expectations and make customers satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.

　　This article introduces the Hope Sunland inverter Hope530G11T4B products, if you are interested in the hope Sunland inverter, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.

Hope Sunland Hope530G11T4B inverter

Sections viewed

Contact

working hours