Hope Sunland Industrial High Voltage Soft Starter HSD2000 Rated voltage 10KV

Product introduction: HSD2000 series high-voltage soft starter is a new type of motor starting equipment, suitable for cage asynchronous and synchronous motors. It is a motor terminal control equipment integrating starting, display, protection and data acquisition. With fewer components, more complex control functions can be achieved.

Hope Senlan HSD2000

Load type	Three-phase medium and high voltage squirrel cage asynchronous/synchronous motor
Power supply parameters
Mains frequency	2% of 50Hz, 60Hz soil
Signal transmitters	optical fiber
Thyristor dynamic equalization protection	RC protection circuit
Thyristor peak voltage	6500V/pcs
Overall machine efficiency	99.9%
Overload capacity	125% full load current continuous operation 400% full load current operation for 60 seconds, 500 % full load current operation for 30 seconds > 6 times the full load current for 1 cycle
Phase sequence	Allows working in any phase sequence
Accreditation standards	Comply with the corresponding national standards
Start and stop mode	Straighten up
	Soften	Jog		Electric voltage: 0~100%
		Jump		Burst voltage: 40~100%
				Jump time: 0.02~2.00S
		slope		Initial voltage: 10~50%
				STARTING TIME: 1~200S
		Rate limiting		Current limiting multiple: 100~500S
				PROTECTION TIME: 1~200S
	Soft parking	Soft parking time: 1~30S
	Free parking
Control mode	panel
	External control
	Infrared remote control
	RS485 communication interface		Support ModbusRTU, ProfibusDP communication protocol
Auxiliary contacts	Relay contact output, maximum AC: 5A/250V, 1# bypass signal, 2# bypass signal, 3# bypass signal, fault signal
Fault display	Phase loss, overheating, overload, current unbalance, overvoltage and undervoltage, etc
Statistics	It can query the cumulative number of starts, and has the function of querying the number of starts when 16 historical faults occur
Current data	3-phase current (optional)
Voltage data	3-phase voltage (optional)
Temperature data	Temperature readings up to 3 temperature detectors
The main circuit is in and out of the line	Six in and three out
Continuous start intervals	When the ambient temperature is greater than 40°C and the starting current is greater than 400%Ie, the interval is not less than 15 minutes. When the temperature is low and the starting current is relatively small, the interval can be reduced appropriately, but at least for 6 minutes.
Starting current	The embedded high-voltage soft starter is a light-load starting equipment, and the general starting current is not more than 4 times of the rated current of the motor according to the different load characteristics.
LCD liquid crystal display	Parameters can be set by pressing buttons, and parameters such as working current, starting times, running time and fault information can be displayed in Chinese and English menus.
Grounding method	The neutral point is not grounded
Drag method	One drags one, one drags many
noises	<50db
Cooling method	Natural cooling
Ambient temperature	- 40°C~+45°C
humidity	5%-95%, no condensation of water beads
vibration	Less than 5.9mlsec2 (=O.6g)
altitude	1000 meters (more than 1000 meters need to be degraded)
Place of use	Indoor installation. If there are metal dust, corrosive gases, flammable and explosive gases, oil mist, salt, water vapor dripping and vibrating places in the installation site, special instructions are required when ordering
Ingress protection	IP30

The company has been with the concept of "customer first", quality and service to win the market, hoping to cooperate with all sectors of society, mutual benefit and win-win, create brilliance, and work together to create a better tomorrow! In line with the concept of honest service, the company welcomes new and old customers to inquire, on-site inspection, and negotiation business.

Hope Sunland Industrial High Voltage Soft Starter HSD2000 Rated voltage 10KV

Sections viewed

Contact

working hours