Cognex Industrial Cameras – Common faults and solutions for industrial cameras

Create Date: 2024-8-30 12:03:23|Source: COGNEX/COGNEX

1. Flip through the detection program and prompt that the camera cannot be found

Investigation method:

(1) Check whether the power supply of the camera is connected and whether the camera network cable is damaged.

(2) Check the NIC driver and camera driver.

(3) Check the network card parameters, camera and computer IP.

2. During use, the camera is disconnected and the picture screen is black

Investigation method:

(1) The power adapter of the camera and the network cable used by the camera and the computer to transmit data are special for industry, and the use of non-supporting hardware will cause problems such as failure to connect the camera, the camera disconnection during use, the black screen of the picture during normal use, and the severe heating of the camera.

(2) The network card parameters and camera bandwidth must be equipped correctly (already equipped at the factory).

(3) Whether the camera power cable and the camera network cable are tightly fastened.

(4) Replace the camera network cable and check whether the network cable is unstable or damaged.

3. The camera cannot be found after powering off or force shutdown and restarting the computer

Investigation method:

(1) Try disabling the network card from the device manager, unplugging the camera power plug-in, and then powering on the computer two minutes after powering off

(2) The power adapter of the camera and the network cable used by the camera and the computer to transmit data are dedicated to the industry, and the use of non-matching hardware will cause the camera to fail to connect and the camera will drop during use.

Cognex Industrial Cameras – Common faults and solutions for industrial cameras

More on that

	Introducing features of Cognex's DataMan 150/260 series fixed-mount barcode readers For 1D linear barcodes, high-density 2D matrix codes, or direct partial marking (DPM) codes, the DataMan 150/260 Series fixed-mount image-based barcode readers offer unprecedented performance, flexibility, and ease of use. peculiarity Achieve high read ...
	Cognex Barcode Scanner – Scanner FAQs 1. Problem description: LED is not on, no beep, no laser Possible causes: The power supply of the scanner is not on, the scanner is not powered or the data cable interface is loose, and the contact is poor Solution: Check the cable of the scanner to make sure that the power supply of the computer is normal, and the data cable is reconnected to the scanner.
	Cognex Barcode Readers – Common Barcode Reader Failures After reading a barcode, the reader freezes 1) Because of the protection function of the barcode reader, if the read barcode data is transmitted incorrectly, it will automatically enter the protection state, thereby preventing data loss. If the data that has not been successfully transmitted is read, the reader can be reused. ...
	Cognex In-Sight 5705 and 5705C color and monochrome vision system capabilities The high performance and resolution of the In-Sight 5705 series make it the fastest five-megapixel standalone vision system. The launch of the In-Sight 5705 Colorful Series makes it the first stand-alone 5-megapixel Colorful Vision System! Both systems support gigabit ...
	Features of the Cognex DataMan 8070 Series Fixed Mount Barcode Readers The DataMan 8070 series includes a variety of types of direct part mark (DPM) and extended-range code reading, providing robust barcode reading for the use of difficult-to-read direct part mark and label codes on a variety of surfaces and symbolic methods. The DataMan 8070 series is equipped with new patented skills, ...
	What's going on with the Cognex barcode scanner error indicator light on? 1. The connection of the code scanner does not meet the transmission specifications; 2. The interface of the barcode scanner or computer is loose; 3. The Bluetooth scanner cannot be connected to the computer normally.
	Cognex's pallet scanning system helps improve logistics efficiency Over the past few years, customer delivery expectations have been shrinking as global e-commerce sales have grown dramatically, putting tremendous pressure on retail distribution and e-commerce businesses. They began looking for ways to increase yield and efficiency, order accuracy, and improve traceability. Among them, the pallet automatically ...
	Cognex Camera - Introduction to the main parameters of the lens of industrial camera The main parameters of the lens 1. Focal Length Focal length is the distance between the center point of the lens and the clear image formed on the glue plane. The size of the focal length determines the size of the viewing angle, the small value of the focal length, the large angle of view, and the large range of observation; The focal length value is large, and the angle of view ...
	What happens when Cognex barcode reader software doesn't show up? Fault 1: The scanner can't scan the barcode Solution: In this case, you must first understand whether you can scan the barcode but not upload it, or the laser but not scan the barcode. You can scan the barcode but do not upload to the computer is that the computer and the scanner are not connected well, if it is wired to check ...
	Cognex launched CeMAT ASIA to deeply interpret the innovative development of intelligent identification As a representative enterprise in the field of intelligent identification technology, Cognex has attracted much attention from the industry for its technological innovation and development. At the 2021 CeMAT ASIA exhibition, which is a stage where hundreds of industry-leading technologies are contending, Cognex also brought several new high-reliability, cost-effective smart products.
	Cognex introduces the In-Sight®3D-L4000 vision system Cognex Corporation (NASDAQ: CGNX), one of the global leaders in industrial machine vision, today announced the In-Sight®3D-L4000 embedded vision system. It is an innovative smart camera with 3D laser displacement technology that helps users to ...
	Cognex Vision Systems – What are the key points to choose a line scan vision system? 1. Selection of line scan industrial cameras Step 1: Calculate the resolution. The width of the object to be inspected (perpendicular to the direction of motion) is divided by the minimum detection accuracy to obtain the required pixel value for each row. Step 2: Calculate the actual accuracy. Select the camera based on the pixel values above. Then use the ...
	Cognex Barcode Readers – What barcode readers do and how they work 1. The purpose of the code reader: Industrial barcode readers are installed on the production line to read the barcodes on the products transmitted by the assembly line. Due to uncertain factors such as barcode printing clarity and factory scanning environment, it is necessary to be able to fix the installation and scan products from multiple angles.
	Cognex Barcode Readers – What Should I Consider When Choosing a Barcode Reader? 1. Barcode type and barcode width, such as barcode symbolization, number of digits, density; 2. The direction and position of the barcode paste, parallel to or perpendicular to the scanning ray? 3. The speed of the assembly line; 4. Scanning distance, distance requirements between barcode and scanner; ...
	Cognex: SIAF ended successfully, and it was a wonderful synchronous review From March 3rd to 5th, 2022, the Guangzhou International Industrial Automation Technology and Equipment Exhibition (SIAF), the vane of the intelligent manufacturing industry in South China, was successfully held in Hall B of the Pazhou Complex of the China Import and Export Fair. Cognex brought a variety of heavyweight new products and solutions to the scene, including ViD ...
	An introduction to the features of the Cognex Vision System - Line Scan Camera 1. Compared with the area scan camera, the acquisition speed of the line scan camera is faster, the general line scan camera according to the interface is different, he has a line frequency from 5K to 100K Hz, or even higher, because of his high line frequency, so the exposure time requirements are very short, often with a bright line light source ...
	An introduction to the Cognex DataMan 470 series fixed-mount barcode readers and their features Summary: DataMan 470 Series fixed-mount barcode readers handle complex, high-throughput production and logistics use with ease. DataMan 470's multi-core processing capabilities, drawing skills, high-resolution sensors, advanced decoding algorithms, and simple settings provide maximum masking range.
	Cognex: True 3D vision for machines to see the "real world" Traditional machine vision systems detect objects by simplifying the 3D "real world" into a 2D flat image. In the past, we used to extract width and length dimension data from 2D machine vision images by carefully selecting software and hardware and performing calibration. And now the vast majority of industries should ...
	Cognex introduces the Edge Intelligence (EI) software platform Cognex Corporation (NASDAQ: CGNX), one of the global leaders in industrial machine vision, today announced the launch of the Cognex Edge Intelligence (EI) software channel. The channel provides code reading function monitoring and equipment management functions to help customers avoid downtime and improve the number of downtimes.
	Analysis of the cause of the failure of the Cognex barcode scanner to scan the code in Excel Fault 1: The scanner can't scan the barcode Solution: In this case, you must first understand whether you can scan the barcode but not upload it, or the laser but not scan the barcode. You can scan the barcode but do not upload to the computer is that the computer and the scanner are not connected well, if it is wired to check ...